Important compatibility info
| Length | 615 mm |
| Height | 40 mm |
| Width | 431 mm |
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Paired article numbers | 194788 |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 163.5 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 55271708 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 04L 906 088 DM |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 185 mm |
| Material | Rubber |
| Inner diameter 1 | 12 mm |
| Function | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 37 mm |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (12531)
- 1x Febi Fastening Clamp (03326)
- 1x Febi Fastening Clamp (03327)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Colour | black |
| Placement on Vehicle | Front Axle Left |
| Length | 163 mm |
| Paired article numbers | 23630 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Material | Steel |
| External Thread Size | M12 x 1,25 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| for OE number | 220 350 27 06 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.3 mm. 156.4 mm |
| Width | 72 mm. 71 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.4 mm. 18.7 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 45 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 5 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 27 mm |
| Number of Teeth | 123 |
| Function | Timing Belt |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 04729 |
| Housing material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Number of Teeth | 25 |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 22 mm |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 114.9 mm |
| Width | 60.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1765 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 260 mm |
| Height | 43 mm |
| Width | 116 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2176 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Number of Ribs | 4 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 790 mm |
| Type | V-Ribbed Belt |
| Replaces | 28776 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 41323 |
| Spanner Size | 22 |
| Length | 171 mm |
| Thickness | 92 mm |
| Extra Description | ProKit |
| External Thread Size | M22 x 1,5, M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.2 mm |
| Mounting points diameter | 12.1 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 50 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 88 mm |
| Inner diameter | 49 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | 3/4" - 16 UNF |
| Inner diameter | 62 mm. 71 mm |
| Additional Information 2 | with seal ring, without integrated oil separator |
| Function | Air Dryer Cartridge, compressed-air system |
| Outer diameter | 76 mm |
| Type | Air Dryer Cartridge, compressed-air system |
| Height | 123 mm |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1515 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Length | 112.7 mm |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 174 mm |
| Outer diameter | 175 mm |
| Function | Air Filter |
| Inner diameter | 80 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Right |
| Outer diameter | 69 mm |
| Outer diameter 1 | 65 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with quick couplers |
| Turbocharger line | Turbocharger to charge air cooler |
| for OE number | 1K0 145 832 E |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 56 |
| Timing Chain Size | G53HR |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
For precise identification, compare the mounting of the sprocket on the oil pump shaft. During the construction period, the vehicle manufacturer changed the wheel mounting mandrel from flattening on one side to flattening on both sides.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (15839)
- 1x Febi Sprocket/Gear, oil pump (49524)
- 1x Febi Screw (49525)
Important compatibility info
| Placement on Vehicle | Lower |
| Length | 709 mm |
| Material | Steel |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 246 mm |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Engine Management | Timing Chain |
| Type | Sprocket, crankshaft |
| Function | Sprocket, crankshaft |
| Number of Teeth | 21. 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Driver Position | for right-hand drive vehicles |
| Width | 242 mm |
| Filter type | Activated Carbon Filter |
| Height | 43 mm |
| Length | 279 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
| Length | 81 mm |
| Height | 156 mm |
| Width | 81 mm |
| Outer diameter | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Width | 78 mm. 69 mm |
| Length | 175 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 19.4 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Cable Length | 320 mm |
| Type | Actuator, fuel filler flap |
| Function | Actuator, fuel filler flap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 175461 |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Spanner Size | 24 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 180062 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
| Material | Steel |
| External Thread Size | M12 x 1,25 |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 72.5 mm |
| Length | 189 mm |
| External Thread Size | M28 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 58 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Number of Teeth, ABS ring | 48 |
| Length | 150 mm |
| Outer diameter | 58 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Centre |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (12190)
- 1x Febi Seal, thermostat (11443)
Important compatibility info
| Thickness | 86 mm. 80 mm |
| Outer diameter | 78 mm |
| Inner diameter | 16 mm |
| Paired article numbers | 26507 |
| Function | Bushing, axle beam |
| Material | Rubber/Metal, Aluminium |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1J0 199 262 BK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 229 mm |
| Material | Steel |
| Paired article numbers | 31251 |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 8 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
| Replaces | 23243 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, parking brake |
| Length | 1643 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 12 mm |
| Thickness | 18 mm |
| Inner diameter | 7 mm. 9 mm |
| Function | Holder, injector |
| Type | Holder, injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Right |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5, M16 x 1,5 |
| Paired article numbers | 40581 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
| Length | 373 mm |
| Placement on Vehicle | Passenger Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































