Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | NST2197 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
£31.77
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | NST2197 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
£31.77
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | NST2196 |
£31.77
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | NST2196 |
£31.77
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
£31.78
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
£31.78
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 55 mm |
| Internal Teeth, wheel side | 32 |
| Length | 135 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 50 |
| Outer diameter | 89 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 55 mm |
| Internal Teeth, wheel side | 32 |
| Length | 135 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 50 |
| Outer diameter | 89 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 34 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 34 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| To be used with part number(s) | FK70118 |
£31.78
Important compatibility info
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| To be used with part number(s) | FK70118 |
£31.78
Important compatibility info
| Placement on Vehicle | Front |
| Function | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM91561H |
| Type | Mounting Kit, catalytic converter |
£31.78
Important compatibility info
| Placement on Vehicle | Front |
| Function | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM91561H |
| Type | Mounting Kit, catalytic converter |
£31.78
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | not prepared for wear warning indicator |
| Inspection Tag | ECE R90 Homologated |
| Thickness/Strength 1 | 18.3 mm |
| Brake System | Mando |
| Type | Brake Pad Set, disc brake |
| Height 1 | 57.9 mm |
| Width 1 | 153.5 mm |
£31.78
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | not prepared for wear warning indicator |
| Inspection Tag | ECE R90 Homologated |
| Thickness/Strength 1 | 18.3 mm |
| Brake System | Mando |
| Type | Brake Pad Set, disc brake |
| Height 1 | 57.9 mm |
| Width 1 | 153.5 mm |
£31.78
Important compatibility info
| Length | 117 mm |
| Width | 83 mm |
| Inner diameter | 16 mm |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Height | 75 mm |
| Type | Mounting, engine |
£31.78
Important compatibility info
| Length | 117 mm |
| Width | 83 mm |
| Inner diameter | 16 mm |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Height | 75 mm |
| Type | Mounting, engine |
£31.78
Important compatibility info
| Function | Control Unit, glow time |
| Type | Control Unit, glow time |
£31.78
Important compatibility info
| Function | Control Unit, glow time |
| Type | Control Unit, glow time |
£31.78
Important compatibility info
| Title | CASTROL GTX 15W-40 A3/B3 - 4L |
| SAE Viscosity | 15W-40 |
| Capacity | 4 l |
| Manufacturer Release | FIAT 9.55535-D2, VW 501 01 / 505 00, MB 229.1 |
| Packing Type | Bottle |
| Specification | ACEA Light Duty A3/B, API Gasoline SP |
| Type | Engine Oil |
| Function | Engine Oil |
| Extra Description | Castrol GTX 15W-40 A3/B3 |
| Oil | Mineral Oil |
| Oil Specification | VW 501 01/ 505 00; Fiat 9.55535-D2; Mercedes MB 229.1 |
| Volume | 4 L |
| ACEA specification | A3/B3 |
| API specification | SP |
| Grade | Multigrade |
| Key Words | GTX |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Mineral Multi
Castrol GTX is one of the world's most trusted motor oils. It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your engine faces every day. Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure. Protect your car from harmful sludge build-up with Castrol GTX.
Application
GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or ACEA A3/B3 15W-40 lubricant. GTX 15W-40 A3/B3 is also approved for use in VW group vehicles and Mercedes Benz vehicles that require a VW 501 01/ 505 00 or MBApproval 229.1 15W-40 lubricant
Advantages
- Contains anti-sludge formula that provides 25% better sludge protection compared to tough industry standards
- Superior protection against viscosity and thermal breakdown
- Anti-wear additives that extend the life of your engine
Product Performance Claims
- ACEA A3/B3
- API SN
- MB-Approval
- 229.1
- VW 501 01 / 505 00
- Meets Fiat 9.55535-D2
- Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
- Contains premium synthetic technology base oils and anti-wear additives
- Demonstrates exceptional protection against high temperature deposits
- Provides advanced protection against viscosity and thermal breakdown
- Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
- Castrol GTX: helps extend engine life
- ACEA A3/B4, API SP
- VW 501 01 / 505 00, Meets Fiat 9.55535-D2
- Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.1
£31.78
Important compatibility info
| Title | CASTROL GTX 15W-40 A3/B3 - 4L |
| SAE Viscosity | 15W-40 |
| Capacity | 4 l |
| Manufacturer Release | FIAT 9.55535-D2, VW 501 01 / 505 00, MB 229.1 |
| Packing Type | Bottle |
| Specification | ACEA Light Duty A3/B, API Gasoline SP |
| Type | Engine Oil |
| Function | Engine Oil |
| Extra Description | Castrol GTX 15W-40 A3/B3 |
| Oil | Mineral Oil |
| Oil Specification | VW 501 01/ 505 00; Fiat 9.55535-D2; Mercedes MB 229.1 |
| Volume | 4 L |
| ACEA specification | A3/B3 |
| API specification | SP |
| Grade | Multigrade |
| Key Words | GTX |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Mineral Multi
Castrol GTX is one of the world's most trusted motor oils. It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your engine faces every day. Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure. Protect your car from harmful sludge build-up with Castrol GTX.
Application
GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or ACEA A3/B3 15W-40 lubricant. GTX 15W-40 A3/B3 is also approved for use in VW group vehicles and Mercedes Benz vehicles that require a VW 501 01/ 505 00 or MBApproval 229.1 15W-40 lubricant
Advantages
- Contains anti-sludge formula that provides 25% better sludge protection compared to tough industry standards
- Superior protection against viscosity and thermal breakdown
- Anti-wear additives that extend the life of your engine
Product Performance Claims
- ACEA A3/B3
- API SN
- MB-Approval
- 229.1
- VW 501 01 / 505 00
- Meets Fiat 9.55535-D2
- Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
- Contains premium synthetic technology base oils and anti-wear additives
- Demonstrates exceptional protection against high temperature deposits
- Provides advanced protection against viscosity and thermal breakdown
- Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
- Castrol GTX: helps extend engine life
- ACEA A3/B4, API SP
- VW 501 01 / 505 00, Meets Fiat 9.55535-D2
- Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.1
£31.78
Important compatibility info
| Paired article numbers | TC1030 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 406 mm |
| Width | 398 mm |
| Material | Sheet Steel |
| Placement on Vehicle | Left, Lower |
£31.78
Important compatibility info
| Paired article numbers | TC1030 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 406 mm |
| Width | 398 mm |
| Material | Sheet Steel |
| Placement on Vehicle | Left, Lower |
£31.78
Important compatibility info
| Weight | 631 g |
| Type | Brake Mounting Plate |
| Guarantee | 2 years warranty |
| Function | Brake Mounting Plate |
£31.78
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.E1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.E1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 33.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023