Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 009 542 17 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 672 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 221 240 13 17 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 780 mm |
| Inner length 1 | 705 mm |
| Outer length 1 | 985 mm |
| Outer length 2 | 978 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 607 mm |
| Core Width | 461 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 80 mm |
| Additional Information | with nuts |
| Outer diameter | 124 mm |
| Thickness | 24 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Function | Joint, propshaft |
| Inner diameter | 33 mm |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03580)
- 3x Febi Screw (03715)
- 3x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with high beam function, with rear fog light function, with klaxon |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 97 mm |
| Width | 62 mm |
| Thickness | 49 mm |
| Voltage | 12 V |
| Number of Connectors / Ports | 8 |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39973 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32326)
- 1x Febi Ball Joint (30510)
- 1x Febi Nut (31484)
- 1x Febi Screw (39865)
- 1x Febi Screw (39229)
- 2x Febi Screw (37613)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39972 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32326)
- 1x Febi Nut (31484)
- 1x Febi Ball Joint (30509)
- 1x Febi Screw (39865)
- 1x Febi Screw (39229)
- 2x Febi Screw (37613)
Important compatibility info
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Height | 415 mm. 383 mm |
| Outer diameter | 333 mm |
| Inner diameter | 200 mm |
| Filter type | Filter Insert |
| Outer diameter 1 | 193 mm |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (47531)
- 1x Febi Air Filter (105983)
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 263 mm |
| Brake Disc Thickness | 22 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 88.9 mm |
| Type | Drive Shaft |
| Thread Size | M24 x 2,0 |
| External Teeth, Wheel Side | 28 |
| Min. Length | 1060 mm |
| External Teeth, Diff.Side | 36 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Number of Connectors / Ports | 2 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 28.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 41749 |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size 2 | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 423 mm |
| Additional Information | with oil drain plug |
| Material | Aluminium |
| Additional Information 2 | with seal ring |
| Spanner Size | 12 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 109 mm |
| Outer diameter | 85 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (46518)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | EGR Valve |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Surface | Coated |
| Width | 24 mm |
| Number of Teeth | 199 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28306)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177914)
Important compatibility info
| Number of Connectors / Ports | 5 |
| for OE number | 059 906 461 N |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 51 mm |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 20 mm |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Minimum thickness | 18.4 mm |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Placement on Vehicle | Rear Axle |
| Bolt Hole Circle Diameter | 112 mm |
| Rotor Style | internally vented, slotted/perforated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm. 51 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 222.5 mm |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, steering knuckle (08524)
- 2x Febi Grease Nipple (01094)
- 2x Febi Circlip (04687)
- 2x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (18992)
- 1x Febi Kingpin (21386)
- 2x Febi Lock Ring, steering knuckle (19029)
- 1x Febi Spacer, kingpin (19021)
- 1x Febi Spacer, kingpin (19023)
- 1x Febi Spacer, kingpin (19025)
- 1x Febi Spacer, kingpin (19026)
- 1x Febi Spacer, kingpin (19027)
- 4x Febi Spacer, kingpin (19028)
- 1x Febi Bush, kingpin (06014)
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bolt Hole Circle Diameter | 86 mm |
| External Teeth, Wheel Side | 27 |
| Bore Diameter | 10.3 mm |
| Number of mounting bores | 6 |
| Thread Size | M24x1,5 |
| Paired article numbers | 181694 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 102 mm |
| Min. Length | 665 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Paired article numbers | 182252 |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Function | Brake Caliper |
| Paired article numbers | 182251 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43758 |
| Inner diameter 2 | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Inner diameter 1 | 14 mm |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43755)
- 1x Febi Nut (39976)
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43757 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43756)
- 1x Febi Nut (39976)
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
| for OE number | 11710-63J20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with nut, with bolts/screws |
| Thread Size | M20x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Min. Length | 804 mm |
| Wheel Sided Joint Diameter | 97 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 280 mm |
| Diameter | 1 mm |
| Additional Information | with rubber-metal mounts |
| Thickness | 46 mm |
| Rod/Strut | Guide Rod |
| Bore Diameter | 40 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 605 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Type | Tie Rod |
| Pipe Diameter | 30 mm |
| Additional Information 2 | with crown nut |
| Length | 1645 mm |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Min. Length | 228 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 310 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 42 mm. 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 124 mm |
| Outer diameter | 92 mm |
| Function | Fuel filter |
| Driver Position | for right-hand drive vehicles |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182949 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 43 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182948 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 215 mm |
| Brake Disc Type | Solid |
| Outer diameter | 306 mm |
| Thickness | 136.5 mm |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 22 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 516 mm. 1318 mm |
| Material | Steel |
| Spanner Size | 19 |
| Colour | Black |
| Rod/Strut | Push Rod |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle, Centre, Outer |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Material | Rubber/Metal |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Additional Information 2 | with cable |
| Connector Shape | round |
| Number of Connectors / Ports | 1 |
| Type | Knock Sensor |
| Function | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















































