Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Inner diameter | 30 mm |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 138 mm |
| Type | Suspension, propshaft |
| Length | 178 mm |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.93
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.93
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Paired article numbers | 181050 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.95
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Cone Size | 22 mm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Length | 1550 mm |
| Outer diameter | 40 mm |
| External Thread Size | M18 x 1,5, M28 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 330 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 129 mm |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 177 mm |
| Minimum thickness | 26 mm |
| Number of Holes | 8 |
| Brake Disc Type | Internally Vented |
| Brake Disc Thickness | 34 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | transmission sided |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 128 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Bolt Hole Circle Diameter | 108 mm |
| Inner diameter | 30 mm |
| Additional Information 2 | with ABS sensor ring |
| Outer diameter | 128 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Cone Size | 32 mm |
| Rod/Strut | Push Rod |
| Additional Information | with nuts |
| Thread Size | M27 x 1,5 |
| Length | 507 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Function | Brake Master Cylinder |
| Additional Information | with gasket/seal |
| Type | Brake Master Cylinder |
| Internal Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Colour | black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 716 mm |
| Min. Length | 437 mm |
| Pipe Diameter | 45 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Rated Power | 0.9 kW |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.00
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 19 |
| Rated Power | 1.95 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.02
Important compatibility info
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
| Function | Multi-circuit Protection Valve |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.04
Important compatibility info
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101771)
- 8x Febi Screw (21197)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
£82.04
Important compatibility info
| Operating Mode | Pneumatic |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.05
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| External Teeth, Diff.Side | 40 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.05
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| for OE number | 2 225 899 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 830 mm |
| Inner length 2 | 865 mm |
| Outer length 1 | 1201 mm |
| Outer length 2 | 1227 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.05
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 48.7 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.15
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 197 mm. 228 mm |
| Thickness | 180 mm. 350 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.16
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.17
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 84.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 947 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.22
Important compatibility info
| Placement on Vehicle | Cylinder Head, Left |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188253 |
| Colour | Grey |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.22
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
£82.27
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 620 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.30
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.33
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 146 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23445)
- 1x Febi Tensioner Pulley, timing belt (27792)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (27819)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178777)
£82.33
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 8 |
| Lock System | with double sealing |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178393 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26454 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.35
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26453 |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18803 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with hydro mount, with holder |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 7 12 9 906 196, 31 10 6 772 199, 31 10 6 757 145 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12528)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£82.36
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18802 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with hydro mount |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 31 10 6 757 145, 31 10 6 772 199, 7 12 9 906 196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12529)
- 1x Febi Mounting, control/trailing arm (18688)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£82.36
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 316 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Paired article numbers | 176295 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.37
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 980 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.39
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 973 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.5 mm |
| Paired article numbers | 184556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.40
Important compatibility info
| Number of Teeth | 39 |
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.41
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1915 mm. 745 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.42
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.44
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.44
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.44
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.45
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Rated Power | 175 W |
| Outer diameter 1 | 73 mm |
| Outer diameter 2 | 154 mm |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.47
Important compatibility info
| Placement on Vehicle | Front, Front Axle Left |
| Additional Information | with fastening/mounting material |
| Paired article numbers | 175035 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174785)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£82.48
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175034 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 24 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174786)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£82.48
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 182030 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Material | Aluminium |
| Placement on Vehicle | Upper, Rear Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.48
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023