Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.75
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.76
Important compatibility info
| Outer diameter | 50 mm |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.82
Important compatibility info
| Material | Cast Iron |
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182949 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.82
Important compatibility info
| Function | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 43 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182948 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.82
Important compatibility info
| for OE number | 213 240 05 00 |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.84
Important compatibility info
| Brake Type | Drum Brake |
| Parameter | Typ 24 / 30 |
| Stroke | 76 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 270 mm |
| Piston Rod Thread | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Type | Spring-loaded Cylinder |
| Replaces | 21898 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.85
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 245 mm. 420 mm |
| Outer diameter | 228 mm. 197 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.85
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.85
Important compatibility info
| Placement on Vehicle | Rear |
| Outer diameter | 149 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.86
Important compatibility info
| Paired article numbers | 174781 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.91
Important compatibility info
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with rubber mounts |
| Cone Size | 20 mm |
| Paired article numbers | 179027 |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.92
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 711 mm |
| Housing Diameter | 22 mm |
| Eject Force | 1270 N |
| Stroke | 196 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 475.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.93
Important compatibility info
| Outer length 2 | 1017 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 800 mm |
| Outer length 1 | 1197 mm |
| Inner length 1 | 937 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.94
Important compatibility info
| Hole Spacing | 188 mm |
| Length | 212 mm |
| Inner diameter | 50 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171929)
- 1x Febi Bearing, propshaft centre bearing (05362)
£73.96
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 36 |
| Min. Length | 515 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.98
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Divert-air Valve, charger |
| Extra Description | febi Plus |
| Type | Divert-air Valve, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.99
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.00
Important compatibility info
| Number of Ribs | 24 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (106196)
- 1x Febi Gasket Set, oil cooler (105961)
- 1x Febi Gasket, oil cooler (105962)
£74.00
Important compatibility info
| Outer diameter | 148 mm |
| Width | 85 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.01
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023