Important compatibility info
| Outer diameter | 58 mm. 27 mm |
| Thickness | 54 mm |
| Inner diameter | 15 mm |
| Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Replaces | 103824 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 58 mm. 27 mm |
| Thickness | 54 mm |
| Inner diameter | 15 mm |
| Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Replaces | 103824 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Pressure | 2 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 000 501 82 15 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Pressure | 2 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 000 501 82 15 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| for OE number | 443 945 515 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| for OE number | 443 945 515 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pipe Connector, exhaust system |
| Inner diameter | 132 mm |
| Pipe Connector | Clamping Clip |
| Thickness | 28 mm |
| Outer diameter | 151 mm |
| Type | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PU (Polyurethane) |
| Thickness | 112 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PU (Polyurethane) |
| Thickness | 112 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (45095)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38763)
- 1x Febi Nut (38938)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 194 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (45095)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38763)
- 1x Febi Nut (38938)
Important compatibility info
| Placement on Vehicle | both sides |
| Height | 10 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 54 mm |
| Inner diameter | 35 mm |
| Type | Shaft Seal, manual transmission |
| Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Height | 10 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 54 mm |
| Inner diameter | 35 mm |
| Type | Shaft Seal, manual transmission |
| Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length | 52 mm |
| Diameter | 42 mm |
| Inner diameter | 14 mm |
| Paired article numbers | FSK8139 |
| Only in connection with | BCA7811, BCA7812, FCA7811, FCA7812 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle, Left, Right, Lower, Front |
Important compatibility info
| Length | 52 mm |
| Diameter | 42 mm |
| Inner diameter | 14 mm |
| Paired article numbers | FSK8139 |
| Only in connection with | BCA7811, BCA7812, FCA7811, FCA7812 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle, Left, Right, Lower, Front |
Important compatibility info
| Material | Plastic |
| for OE number | 038 121 132 C |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Material | Plastic |
| for OE number | 038 121 132 C |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Function | Coolant Flange |
| Material | Plastic |
| Type | Coolant Flange |
| Number of Flange Connections | 3 |
Important compatibility info
| Function | Coolant Flange |
| Material | Plastic |
| Type | Coolant Flange |
| Number of Flange Connections | 3 |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, crankshaft pulse |
| Cable Length | 330 mm |
| Sensor Type | Inductive Sensor |
| Resistance | 370 Ohm |
| Fitting Depth | 24 mm |
| Connector Shape | angular |
| Housing Colour | Grey |
| Technical Information Number | Connector B |
| Number of Poles | 3 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.06 kg |
| Type | Sensor, crankshaft pulse |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, crankshaft pulse |
| Cable Length | 330 mm |
| Sensor Type | Inductive Sensor |
| Resistance | 370 Ohm |
| Fitting Depth | 24 mm |
| Connector Shape | angular |
| Housing Colour | Grey |
| Technical Information Number | Connector B |
| Number of Poles | 3 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.06 kg |
| Type | Sensor, crankshaft pulse |
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
| Length | 675 mm |
| Colour | Black |
| Number of Ribs | 3 |
| Function | V-Ribbed Belt |
| Width | 10 mm |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt |
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
| Length | 675 mm |
| Colour | Black |
| Number of Ribs | 3 |
| Function | V-Ribbed Belt |
| Width | 10 mm |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt |
Important compatibility info
| Title | Relay - 12V - 40A - 4-Pin - Open & Diode |
Additional Information
- Please check technical details for vehicle applications
- 30, 85, 86 and 87 Pins
- Moulded Bracket
- 12 Volts 40 Amp
- Pearl Open and Diode Relay
- Relay used for specific applications within the accessory market, must be fitted by a qualified auto electrician
- Vehicle Applications: Renault: 19 1.9D FQ8 91-95, Clio I/II 1.9D FQ8 91-94, Espace II 2.1TD J8S 95-96, Safrane 2.1TD J8S 92-98, Safrane 2.5TD 8144 92-98, Renault LCV: Extra 1.9D F8Q 91-92
Important compatibility info
| Mounting Type | Bolted |
| Bore Diameter 1 | 14.9 mm |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 8.5 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Mounting Type | Bolted |
| Bore Diameter 1 | 14.9 mm |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 8.5 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Steering arm type | for control arm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















