Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
| Thickness/Strength 1 | 6.5 mm |
| Outer diameter | 202.08 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35395)
- 1x Febi Fuel filter (171330)
- 1x Febi Air Filter (40548)
- 1x Febi Filter, cabin air (22009)
- 1x Febi Air Filter, compressor intake (38976)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 570 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 13 mm |
| Number of Ribs | 5 |
| Outer diameter 1 | 139 mm |
| Parameter | 6PK |
| Outer diameter 2 | 144 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals, with oil cooler, with oil filter |
| Additional Information 2 | with pressure sensor |
| for OE number | 03N 115 389 M |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 175615 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 150 |
| Timing Chain Size | Z46-16 |
| Weight | 1.105 kg |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Bolt, camshaft gear (46364)
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Spanner Size | 17 |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107125 |
| Cable Length | 500 mm. 1200 mm |
| Number of circuits | 31 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 55 mm |
| Brake Disc Thickness | 33 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Centering Diameter | 131 mm |
| Surface | Coated |
| Outer diameter | 308 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 11 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Width | 17 mm. 20 mm |
| Number of Teeth | 130. 58 |
| Belts | with rounded tooth profile |
| Replaces | 24734 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (21768)
- 1x Febi Timing Belt (19364)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21766)
- 1x Febi Tensioner Pulley, timing belt (11274)
- 1x Febi Tensioner Pulley, timing belt (15888)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (11339)
- 1x Febi Screw (101433)
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with spacer plate |
| Length | 140 mm |
| Width | 120 mm |
| Thickness | 80 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 80 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36345 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 139 |
| Function | Timing Belt Kit |
| Width | 25.4 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (39100)
- 1x Febi Tensioner Pulley, timing belt (39101)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 15 mm |
| Function | Mounting, engine / Mounting, manual transmission |
| Width | 230 mm |
| Thickness | 130 mm |
| Type | Mounting, engine / Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear, both sides |
| Material | Cast Steel |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 46166 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut, with hydro mount |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (46163)
- 1x Febi Nut (38356)
- 1x Febi Mounting, control/trailing arm (23359)
Important compatibility info
| Function | Door Lock |
| Internal Thread Size | M8 x 1,25 |
| Placement on Vehicle | Right Front |
| Length | 92 mm |
| Width | 86 mm |
| Thickness | 72 mm |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch, with cable |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Internal Thread Size | M10 x 1,25 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 58. 130 |
| for OE number | 036 109 119 AG S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21772)
- 1x Febi Water Pump, engine cooling (18894)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26641 |
| Additional Information | with nuts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 26 11 8 488 056 |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Length | 164 mm |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40387 |
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30199)
- 1x Febi Bolt, control arm (40259)
- 2x Febi Washer (37906)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, control arm (40261)
Important compatibility info
| Function | Steering Column Switch |
| Combi Switch Function | with indicator function |
| Number of Connectors / Ports | 10 |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180543 |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,25 |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26293)
- 1x Febi Assembly Kit, propshaft joint (43515)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut, with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 86.36 mm |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Min. Length | 771 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 153 mm |
| Outer diameter | 153 mm |
| Additional Information 2 | with screw |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103249)
- 1x Febi Bolt, crankshaft gear (39116)
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 14 mm |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Paired article numbers | 176070 |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Paired article numbers | 175624 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Exhaust Turbocharger |
| Cable Length | 366 mm |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30433 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































