Important compatibility info
| Function | Drive Shaft | 
| External Teeth, Diff.Side | 28 | 
| Min. Length | 964 mm | 
| Wheel Sided Joint Diameter | 91 mm | 
| Transmission-side joint diameter | 87.5 mm | 
| Type | Drive Shaft | 
| Placement on Vehicle | Front Axle Right | 
| External Teeth, Wheel Side | 40 | 
| Additional Information 2 | with screw | 
| Thread Size | M10x1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side | 
| Type | Bellow Kit, drive shaft | 
| Function | Bellow Kit, drive shaft | 
| Inner diameter 1 | 27 mm | 
| Inner diameter 2 | 87 mm | 
| Joint Type | CV Joint | 
| Length | 126 mm | 
| Material | Thermoplastic polyester elastomer | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184713)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Number of Connectors / Ports | 5 | 
| for OE number | 059 906 461 N | 
| Type | Mass Air Flow Sensor | 
| Function | Mass Air Flow Sensor | 
| Resistor Type | Hot-wire Sensor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Right | 
| Height | 100 mm | 
| Width | 284 mm | 
| Number of Connectors / Ports | 6 | 
| Light Function | with stop light (LED), with indicator (LED), with rear fog light (LED), with reverse light (LED), with taillight (LED), without licence plate light | 
| Cable Length | 2000 mm | 
| Depth | 38 mm | 
| Voltage from | 10 V | 
| Voltage to | 30 V | 
| Protection Type (IP Code) | IP67 | 
| Type | Tail Light Assembly | 
| Distance of fastening bolts | 152 mm | 
| Fulfils ECE norm | R10, R23, R38, R3, R6, R7 | 
| Temperature range from | -40 °C | 
| Temperature range to | 65 °C | 
| Function | Tail Light Assembly | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 47 mm | 
| Width | 43 mm | 
| Material | Rubber | 
| Thickness | 47 mm | 
| Inner diameter | 22 mm | 
| Type | Mounting, stabiliser bar | 
| Function | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fan, engine cooling | 
| Number of Wings | 11 | 
| Function | Fan, engine cooling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Door Handle, interior equipment | 
| Material | Plastic | 
| Colour | Black | 
| Paired article numbers | 184615 | 
| Placement on Vehicle | Right | 
| Extra Description | febi Plus | 
| Length | 271 mm | 
| Type | Door Handle, interior equipment | 
| Additional Information | without cladding | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Right | 
| Colour | Beige | 
| Extra Description | febi Plus | 
| Type | Door Handle, interior equipment | 
| Paired article numbers | 184614 | 
| Function | Door Handle, interior equipment | 
| Additional Information | without cladding | 
| Material | Plastic | 
| Length | 271 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M20x1,5 | 
| External Teeth, Wheel Side | 21 | 
| External Teeth, Diff.Side | 23 | 
| Number of Teeth, ABS ring | 44 | 
| Min. Length | 748 mm | 
| Wheel Sided Joint Diameter | 84 mm | 
| Transmission-side joint diameter | 79.3 mm | 
| Type | Drive Shaft | 
| Function | Drive Shaft | 
| Additional Information 2 | with nut | 
| Placement on Vehicle | Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, manual transmission | 
| Type | Mounting, manual transmission | 
| Placement on Vehicle | Left | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, headlight levelling | 
| Type | Sensor, headlight levelling | 
| Placement on Vehicle | Front | 
| Number of Connectors / Ports | 4 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1T0 907 503 | 
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
| Number of Connectors / Ports | 4 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
| Placement on Vehicle | Left Front | 
| Number of Connectors / Ports | 4 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear | 
| Number of Connectors / Ports | 4 | 
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left | 
| Number of Connectors / Ports | 4 | 
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
| Number of Connectors / Ports | 4 | 
| Placement on Vehicle | Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 | 
| for OE number | 1K0 941 274 C | 
| Type | Sensor, headlight levelling | 
| Function | Sensor, headlight levelling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain Kit | 
| Function | Timing Chain Kit | 
| Chain Type | Silent Chain, Closed chain | 
| Number of Chain Links | 96 | 
| Extra Description | Basic Short Kit | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49690)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 56 mm | 
| Width | 53 mm | 
| Material | PU (Polyurethane) | 
| Type | Rubber Buffer, suspension | 
| Function | Rubber Buffer, suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 53 mm | 
| Width | 56 mm | 
| Material | PU (Polyurethane) | 
| Type | Rubber Buffer, suspension | 
| Function | Rubber Buffer, suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 47 mm | 
| Type | Rubber Buffer, suspension | 
| Function | Rubber Buffer, suspension | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Material | PU (Polyurethane) | 
| Width | 58 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| Bearing/Mounting Type | Hydro Mount | 
| Paired article numbers | 104660 | 
| Placement on Vehicle | Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain | 
| Type | Timing Chain Kit | 
| Number of Chain Links | 148 | 
| Timing Chain Size | G53RING | 
| Extra Description | Basic Short Kit | 
| Function | Timing Chain Kit | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (184834)
- 1x Febi Tensioner, timing chain (182806)
- 1x Febi Guide, timing chain (183442)
- 1x Febi Guide, timing chain (183265)
- 1x Febi Guide, timing chain (183266)
Important compatibility info
| Length | 1130 mm | 
| Number of Ribs | 6 | 
| Type | V-Ribbed Belt Set | 
| Function | V-Ribbed Belt Set | 
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Tensile Cord Material | Polyester | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
Important compatibility info
| Placement on Vehicle | transmission sided | 
| Length | 87 mm | 
| Material | NBR (nitrile butadiene rubber) | 
| Inner diameter 1 | 22 mm | 
| Inner diameter 2 | 71 mm | 
| Joint Type | Tripod Joint | 
| Type | Bellow Kit, drive shaft | 
| Function | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184795)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Material | Aluminium | 
| Additional Information 2 | with ball joint | 
| Steering arm type | Control Arm | 
| Paired article numbers | 184888 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Cone Size 2 | 21 mm | 
| External Thread Size | M14 x 1,5 | 
| Cone Size | 16.6 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Roller Guide, sliding door | 
| Function | Roller Guide, sliding door | 
| Extra Description | febi Plus | 
| Placement on Vehicle | Upper, Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 | 
| Placement on Vehicle | Front Axle Right | 
| Material | Aluminium | 
| Additional Information 2 | with ball joint | 
| Steering arm type | Control Arm | 
| Paired article numbers | 184883 | 
| Cone Size | 16.5 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Cone Size 2 | 21 mm | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Rubber Buffer, suspension | 
| External Thread Size | M10 x 1,25 | 
| Function | Rubber Buffer, suspension | 
| Material | PU (Polyurethane) | 
| Width | 118 mm | 
| Length | 162 mm | 
| Placement on Vehicle | Rear Axle Right, Rear Axle Left | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End | 
| Additional Information | with lock nut | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 123 mm | 
| Spanner Size | 24 | 
| Type | Tie Rod End | 
| Internal Thread Size | M16 x 1,5 | 
| External Thread Size | M12 x 1,5 | 
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1231 mm | 
| Function | V-Ribbed Belt Set | 
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Tensile Cord Material | Aramid | 
| Alternator type | for starter generator | 
| Type | V-Ribbed Belt Set | 
| Number of Ribs | 6 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (183223)
- 1x Febi Belt Tensioner, v-ribbed belt (184025)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (182534)
Important compatibility info
| Function | Tensioner Pulley, timing belt | 
| Width of castor bearing surface | 26 mm | 
| Track rollers material | Plastic | 
| Type | Tensioner Pulley, timing belt | 
| Outer diameter | 60 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner Pulley, v-ribbed belt | 
| Type | Tensioner Pulley, v-ribbed belt | 
| Mounting points diameter | 17 mm | 
| Width of castor bearing surface | 25 mm | 
| Outer diameter | 70 mm | 
| Material | Metal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 16620-0Y020 | 
| Material | Plastic | 
| Outer diameter | 70 mm | 
| Operating Mode | Automatic | 
| Type | Belt Tensioner, V-ribbed belt | 
| Function | Belt Tensioner, V-ribbed belt | 
| Width of castor bearing surface | 24 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 31 mm | 
| Outer diameter | 63 mm | 
| Function | Tensioner Pulley, timing belt | 
| Type | Tensioner Pulley, timing belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal | 
| Outer diameter | 70 mm | 
| Inner diameter | 10 mm | 
| Mounting points diameter | 15 mm | 
| Type | Deflection/Guide Pulley, V-ribbed belt | 
| Function | Deflection/Guide Pulley, V-ribbed belt | 
| Width of castor bearing surface | 33 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, V-ribbed belt | 
| Mounting points diameter | 17 mm | 
| Material | Metal | 
| Type | Deflection/Guide Pulley, V-ribbed belt | 
| Inner diameter | 10 mm | 
| Width of castor bearing surface | 18 mm | 
| Outer diameter | 65 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt | 
| Material | Metal | 
| Outer diameter | 70 mm | 
| Inner diameter | 10 mm | 
| Mounting points diameter | 10 mm | 
| Type | Deflection/Guide Pulley, v-ribbed belt | 
| Width of castor bearing surface | 30 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Function | V-Ribbed Belt | 
| Length | 882 mm | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
| Number of Ribs | 6 | 
| Tensile Cord Material | Aramid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 65 mm | 
| Inner diameter | 14.2 mm | 
| Placement on Vehicle | Rear, inner, Front Axle Left, Front Axle Right | 
| Material | Rubber/Metal | 
| Outer diameter | 78.1 mm | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1162 mm | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
| Function | V-Ribbed Belt | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 8 | 
| Tensile Cord Material | Aramid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 | 
| Alternator type | for starter generator | 
| Tensile Cord Material | Aramid | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 1437 mm | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension | 
| Material | PU (Polyurethane) | 
| Type | Rubber Buffer, suspension | 
| Width | 57 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 97 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 1073 mm | 
| Alternator type | for starter generator | 
| Number of Ribs | 6 | 
| Function | V-Ribbed Belt | 
| Tensile Cord Material | Aramid | 
| Type | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt | 
| Number of Ribs | 8 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Alternator type | for starter generator | 
| Length | 954 mm | 
| Function | V-Ribbed Belt | 
| Tensile Cord Material | Aramid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1057 mm | 
| Number of Ribs | 7 | 
| Tensile Cord Material | Aramid | 
| Function | V-Ribbed Belt | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 987 mm | 
| Number of Ribs | 6 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Tensile Cord Material | Aramid | 
| Function | V-Ribbed Belt | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
| Tensile Cord Material | Aramid | 
| Number of Ribs | 6 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Alternator type | for starter generator | 
| Length | 1441 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, manual transmission | 
| Function | Mounting, manual transmission | 
| Placement on Vehicle | Left | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Tensile Cord Material | Aramid | 
| Length | 1090 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 7 | 
| Alternator type | for starter generator | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023








































