Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bolt, control arm |
| Type | Bolt, control arm |
| Length 1 | 85.6 mm |
| Length 2 | 100 mm |
| Quality/ Grade | 10.9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 192.3 mm. 193 mm |
| Width | 96.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 16.6 mm |
| Function | Brake Pad Set, disc brake |
| Width | 93.1 mm |
| Inspection Tag | ECE R90 Approved |
| Length | 189.3 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 106334 |
| Function | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Clamping Bolt Set, ball joint |
| Type | Clamping Bolt Set, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Securing Plate, ball joint (14238)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
| Spanner Size | 38 |
| Length | 225 mm |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108096)
- 2x Febi Rubber Buffer, suspension (44726)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 209 mm |
| Outer diameter | 40 mm |
| Additional Information 2 | with nut |
| Spanner Size | 36 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Additional Information | with locking plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 19 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Width | 57.4 mm |
| Length | 137 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Manufacturer | FIAT VAUXHALL |
| Model | 500L CORSA |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 84 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173226)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 230 mm |
| Additional Information | with counter nut |
| Outer diameter | 37 mm |
| Spanner Size | 32 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 220 mm |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 80 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 170 mm. 171.2 mm |
| Width | 76.8 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Length | 80 mm |
| Width | 64 mm |
| Thickness | 37 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Thickness | 154 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 75.6 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 13.8 mm |
| Length | 121 mm |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting Kit, tie rod end |
| Type | Mounting Kit, tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (21479)
- 1x Febi Screw (21478)
- 1x Febi Nut (22263)
Important compatibility info
| Width | 12 mm |
| Outer diameter | 91 mm |
| Inner diameter | 59 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















