Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 1740082810 |
| Number of Wings | 7 |
Important compatibility info
| Type | Expansion Valve, air conditioning |
| Function | Expansion Valve, air conditioning |
Important compatibility info
| Type | Expansion Valve, air conditioning |
| Function | Expansion Valve, air conditioning |
Important compatibility info
| Opening Temperature | 87 °C |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
- 1x Quinton Hazell Thermostat, coolant (QTH731K)
- 1x Quinton Hazell Thermostat, coolant (QTH732K)
Important compatibility info
| Opening Temperature | 87 °C |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
- 1x Quinton Hazell Thermostat, coolant (QTH731K)
- 1x Quinton Hazell Thermostat, coolant (QTH732K)
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Number of Holes | 4 |
| Outer diameter | 264 mm |
| Minimum thickness | 8 mm |
| Centering Diameter | 57 mm |
| Brake Disc Thickness | 10 mm |
| Height | 42 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Number of Holes | 4 |
| Outer diameter | 264 mm |
| Minimum thickness | 8 mm |
| Centering Diameter | 57 mm |
| Brake Disc Thickness | 10 mm |
| Height | 42 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7265 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7265 |
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Temperature range to | 130 °C |
| Temperature range from | -40 °C |
| Type | Sensor, intake manifold pressure |
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Temperature range to | 130 °C |
| Temperature range from | -40 °C |
| Type | Sensor, intake manifold pressure |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Sensor Type | Inductive Sensor |
| Cable Length | 970 mm |
| Length | 79 mm |
| Additional Information 2 | with cable |
| Connector Shape | angular |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Sensor Type | Inductive Sensor |
| Cable Length | 970 mm |
| Length | 79 mm |
| Additional Information 2 | with cable |
| Connector Shape | angular |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Important compatibility info
| Length | 60 mm |
| Outer diameter | 39.5 mm. 45.5 mm |
| Spanner Size | 17 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 1 |
| Function | Sensor, oil pressure |
| Switch point to | 3 bar |
| External Thread Size | M12 x 1,5 |
| Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 60 mm |
| Outer diameter | 39.5 mm. 45.5 mm |
| Spanner Size | 17 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 1 |
| Function | Sensor, oil pressure |
| Switch point to | 3 bar |
| External Thread Size | M12 x 1,5 |
| Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 110 mm |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
| Inner diameter | 24 mm |
| Outer diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 100 768 S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Outer diameter | 55 mm |
| Inner diameter | 14.5 mm. 17 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Outer diameter | 55 mm |
| Inner diameter | 14.5 mm. 17 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Inner diameter 2 | 44 mm |
| Function | Charge Air Hose |
| Colour | Black |
| Inner diameter 1 | 44 mm |
| Type | Charge Air Hose |
Additional Information
- 1x First Line Fastening Clamp, charge air hose (FHC1002S)
- 1x First Line Fastening Clamp, charge air hose (FHC1106S)
- 1x First Line Fastening Clamp, charge air hose (FHC1107S)
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Inner diameter 2 | 44 mm |
| Function | Charge Air Hose |
| Colour | Black |
| Inner diameter 1 | 44 mm |
| Type | Charge Air Hose |
Additional Information
- 1x First Line Fastening Clamp, charge air hose (FHC1002S)
- 1x First Line Fastening Clamp, charge air hose (FHC1106S)
- 1x First Line Fastening Clamp, charge air hose (FHC1107S)
Important compatibility info
| Cable Length | 980 mm |
| Sensor Type | Inductive Sensor |
| Fitting Depth | 50 mm |
| Additional Information 2 | without bracket |
| Additional Information | with cable |
| Net weight | 0.078 kg |
| Extra Description | Fuel Parts |
| Function | Sensor, wheel speed |
| Connector Shape | Rectangular |
| Housing Colour | White |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Rear Axle Right |
| Type | Sensor, wheel speed |
Important compatibility info
| Cable Length | 980 mm |
| Sensor Type | Inductive Sensor |
| Fitting Depth | 50 mm |
| Additional Information 2 | without bracket |
| Additional Information | with cable |
| Net weight | 0.078 kg |
| Extra Description | Fuel Parts |
| Function | Sensor, wheel speed |
| Connector Shape | Rectangular |
| Housing Colour | White |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Rear Axle Right |
| Type | Sensor, wheel speed |
Important compatibility info
| Net weight | 0.892 kg |
| Extra Description | Fuel Parts |
| Function | Ignition Coil |
| Resistance | 12.14 kOhm |
| Fastening Type | Four-point mounting |
| Ignition Coil | Connector Type SAE |
| Resistance | 0.9 Ohm |
| Connector Shape | Rectangular |
| Number of Inlets / Outlets | 4 |
| Number of Poles | 3 -pin connector |
| Voltage | 12 V |
| Weight | 0.8 kg |
| Type | Ignition Coil |
Important compatibility info
| Net weight | 0.892 kg |
| Extra Description | Fuel Parts |
| Function | Ignition Coil |
| Resistance | 12.14 kOhm |
| Fastening Type | Four-point mounting |
| Ignition Coil | Connector Type SAE |
| Resistance | 0.9 Ohm |
| Connector Shape | Rectangular |
| Number of Inlets / Outlets | 4 |
| Number of Poles | 3 -pin connector |
| Voltage | 12 V |
| Weight | 0.8 kg |
| Type | Ignition Coil |
Important compatibility info
| Function | Knock Sensor |
| Cable Length | 270 mm. 350 mm |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with cable |
| Type | Knock Sensor |
| Net weight | 0.082 kg |
Important compatibility info
| Function | Knock Sensor |
| Cable Length | 270 mm. 350 mm |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with cable |
| Type | Knock Sensor |
| Net weight | 0.082 kg |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Knock Sensor |
| Cable Length | 350 mm |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.09 kg |
| Type | Knock Sensor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Knock Sensor |
| Cable Length | 350 mm |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.09 kg |
| Type | Knock Sensor |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Housing Colour | Green |
| Cable Length | 1220 mm |
| Lambda Sensor | Diagnostic Probe |
| Net weight | 0.116 kg |
| Weight | 0.14 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Housing Colour | Green |
| Cable Length | 1220 mm |
| Lambda Sensor | Diagnostic Probe |
| Net weight | 0.116 kg |
| Weight | 0.14 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Specification | MTF LT-2 |
| Capacity | 5 l |
| Packing Type | Bottle |
| Oil | Mineral Oil |
| Type | Manual Transmission Oil |
| Function | Manual Transmission Oil |
| Extra Description | NAPA HD 75W-80 |
| SAE Viscosity | 75W-80 |
| Title | NAPA HD 75W-80 (5L) |
| API specification | GL-4, GL-4+ |
Additional Information
- Corrosion protection
- Improved shift quality
- Shear stability
- Improved synchromesh performance
- API GL-4, GL-4+
- (Tranself TRZ, NFJ, NFP, TRJ), BMW MTF LT-2, Special Honda MTF 94, MTF, MTF-II
Important compatibility info
| Specification | MTF LT-2 |
| Capacity | 5 l |
| Packing Type | Bottle |
| Oil | Mineral Oil |
| Type | Manual Transmission Oil |
| Function | Manual Transmission Oil |
| Extra Description | NAPA HD 75W-80 |
| SAE Viscosity | 75W-80 |
| Title | NAPA HD 75W-80 (5L) |
| API specification | GL-4, GL-4+ |
Additional Information
- Corrosion protection
- Improved shift quality
- Shear stability
- Improved synchromesh performance
- API GL-4, GL-4+
- (Tranself TRZ, NFJ, NFP, TRJ), BMW MTF LT-2, Special Honda MTF 94, MTF, MTF-II
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 141 mm |
| Additional Information | with retaining spring |
| Thickness | 17 mm |
| Brake System | ATE |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 1 | 60 mm |
| Height 2 | 52 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | 90R-01119/802 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 141 mm |
| Additional Information | with retaining spring |
| Thickness | 17 mm |
| Brake System | ATE |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 1 | 60 mm |
| Height 2 | 52 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | 90R-01119/802 |
Important compatibility info
| Function | Dryer, air conditioning |
| Outlet Diameter | 15 mm |
| Inlet Diameter | 15 mm |
| Material | Aluminium |
| Diameter | 89 mm |
| Height | 338 mm |
| Extra Description | EASY FIT |
| Type | Dryer, air conditioning |
| Additional Information 2 | with seal ring |
Important compatibility info
| Function | Dryer, air conditioning |
| Outlet Diameter | 15 mm |
| Inlet Diameter | 15 mm |
| Material | Aluminium |
| Diameter | 89 mm |
| Height | 338 mm |
| Extra Description | EASY FIT |
| Type | Dryer, air conditioning |
| Additional Information 2 | with seal ring |
Important compatibility info
| Surface | Coated |
| Type | Brake Disc Rotor |
| Minimum thickness | 8 mm |
| Centering Diameter | 64 mm |
| Function | Brake Disc |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
| Outer diameter | 282 mm |
| Placement on Vehicle | Rear Axle |
| Height | 37 mm |
| Bolt Hole Circle Diameter | 114 mm |
Important compatibility info
| Surface | Coated |
| Type | Brake Disc Rotor |
| Minimum thickness | 8 mm |
| Centering Diameter | 64 mm |
| Function | Brake Disc |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
| Outer diameter | 282 mm |
| Placement on Vehicle | Rear Axle |
| Height | 37 mm |
| Bolt Hole Circle Diameter | 114 mm |
Important compatibility info
| Width | 26 mm |
| Diameter | 70 mm |
| Function | Tensioner Lever, v-ribbed belt |
| Type | Tensioner Lever, v-ribbed belt |
Important compatibility info
| Width | 26 mm |
| Diameter | 70 mm |
| Function | Tensioner Lever, v-ribbed belt |
| Type | Tensioner Lever, v-ribbed belt |
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inner diameter 1 | 45.0 mm |
| Inner diameter 2 | 30.0 mm |
| Outer diameter 1 | 85.0 mm |
| Width 1 | 20.7 mm |
| Outer diameter 2 | 72.0 mm |
| Width 2 | 20.8 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 1x SKF Bearing (SKF01613)
- 1x SKF Assortment, fasteners (SKF02610)
- 1x SKF Bearing (SKF01475)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inner diameter 1 | 45.0 mm |
| Inner diameter 2 | 30.0 mm |
| Outer diameter 1 | 85.0 mm |
| Width 1 | 20.7 mm |
| Outer diameter 2 | 72.0 mm |
| Width 2 | 20.8 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 1x SKF Bearing (SKF01613)
- 1x SKF Assortment, fasteners (SKF02610)
- 1x SKF Bearing (SKF01475)
Important compatibility info
| Width | 48 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Service Book (SKF02885)
- 1x SKF Bearing (SKF01227)
- 1x SKF Assortment, fasteners (SKF02595)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























