Important compatibility info
| Function | Charge Air Hose |
| Hose Length | 150 mm |
| Inner diameter 2 | 47 mm |
| Colour | Black |
| Inner diameter 1 | 47 mm |
| Material | Silicone |
| Type | Charge Air Hose |
Important compatibility info
| Function | Charge Air Hose |
| Hose Length | 150 mm |
| Inner diameter 2 | 47 mm |
| Colour | Black |
| Inner diameter 1 | 47 mm |
| Material | Silicone |
| Type | Charge Air Hose |
Important compatibility info
| Weight | 416 g |
| Placement on Vehicle | Front and Rear, Lower |
| Material | Rubber, Aluminium |
| Operating Mode | Manual |
| Colour | silver |
| Quality | OE Performance |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Weight | 416 g |
| Placement on Vehicle | Front and Rear, Lower |
| Material | Rubber, Aluminium |
| Operating Mode | Manual |
| Colour | silver |
| Quality | OE Performance |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Replaced by | 08-107400-10 |
| Component Number | 1.2mm 001 NT ST, 1.5mm 001 CR P IKA, 3.0mm 712 CR ST |
| Cylinder Bore | 84.8 mm |
| Kit/Set Contents | For Single Cylinder |
| Function | Piston Ring Kit |
| Type | Piston Ring Kit |
Additional Information
- 1x Goetze Piston Ring (1.2mm001NTST)
- 1x Goetze Piston Ring (1.5mm001CRPIKA)
- 1x Goetze Piston Ring (3.0mm712CRST)
Important compatibility info
| Replaced by | 08-107400-10 |
| Component Number | 1.2mm 001 NT ST, 1.5mm 001 CR P IKA, 3.0mm 712 CR ST |
| Cylinder Bore | 84.8 mm |
| Kit/Set Contents | For Single Cylinder |
| Function | Piston Ring Kit |
| Type | Piston Ring Kit |
Additional Information
- 1x Goetze Piston Ring (1.2mm001NTST)
- 1x Goetze Piston Ring (1.5mm001CRPIKA)
- 1x Goetze Piston Ring (3.0mm712CRST)
Important compatibility info
| Function | Ignition Cable Kit |
| Cable Length | 470 mm. 610 mm. 780 mm. 890 mm |
| Ignition Coil | Connector Type M4 |
| for pipe diameter | 7 mm |
| Type | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| Extra Description | HighVolt |
Important compatibility info
| Function | Ignition Cable Kit |
| Cable Length | 470 mm. 610 mm. 780 mm. 890 mm |
| Ignition Coil | Connector Type M4 |
| for pipe diameter | 7 mm |
| Type | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| Extra Description | HighVolt |
Important compatibility info
| Spring Design | Coil Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Type | Suspension Spring |
Important compatibility info
| Spring Design | Coil Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Type | Suspension Spring |
Important compatibility info
| Function | Suspension Spring |
| Spring Design | Coil Spring |
| Placement on Vehicle | Front Axle |
| Extra Description | K-Flex |
| Type | Suspension Spring |
Important compatibility info
| Function | Suspension Spring |
| Spring Design | Coil Spring |
| Placement on Vehicle | Front Axle |
| Extra Description | K-Flex |
| Type | Suspension Spring |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Weight | 0.078 kg |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Cable Length | 210 mm |
| Lambda Sensor | Diagnostic Probe |
| Net weight | 0.054 kg |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Weight | 0.078 kg |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Cable Length | 210 mm |
| Lambda Sensor | Diagnostic Probe |
| Net weight | 0.054 kg |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Net weight | 0.044 kg |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55494701 |
| Cable Length | 345 mm |
| Housing Colour | Grey |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Weight | 0.068 kg |
| Fitting Depth | 50 mm |
| Spanner Size | 17 |
| Thread Size | M14 x 1.5 |
| Angle | 90 ° |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Net weight | 0.044 kg |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55494701 |
| Cable Length | 345 mm |
| Housing Colour | Grey |
| Connector Shape | Oval |
| Number of Poles | 2 -pin connector |
| Weight | 0.068 kg |
| Fitting Depth | 50 mm |
| Spanner Size | 17 |
| Thread Size | M14 x 1.5 |
| Angle | 90 ° |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Spanner Size | 17 |
| Thread Size | M14 x 1.5 |
| Number of Poles | 2 -pin connector |
| Fitting Depth | 30 mm |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.066 kg |
| Cable Length | 250 mm |
| Angle | 0 ° |
| Connector Shape | rectangular |
| Net weight | 0.042 kg |
| Type | Sensor, exhaust gas temperature |
| Housing Colour | White |
| Placement on Vehicle | after soot particulate filter |
Important compatibility info
| Spanner Size | 17 |
| Thread Size | M14 x 1.5 |
| Number of Poles | 2 -pin connector |
| Fitting Depth | 30 mm |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.066 kg |
| Cable Length | 250 mm |
| Angle | 0 ° |
| Connector Shape | rectangular |
| Net weight | 0.042 kg |
| Type | Sensor, exhaust gas temperature |
| Housing Colour | White |
| Placement on Vehicle | after soot particulate filter |
Important compatibility info
| Fitting Depth | 38 mm |
| Weight | 0.072 kg |
| Cable Length | 495 mm |
| Spanner Size | 14 |
| Function | Sensor, exhaust gas temperature |
| Angle | 0 ° |
| Type | Sensor, exhaust gas temperature |
| Housing Colour | Black |
| Thread Size | M12 x 1.25 |
| Connector Shape | oval |
| Number of Poles | 2 -pin connector |
| Net weight | 0.048 kg |
Important compatibility info
| Fitting Depth | 38 mm |
| Weight | 0.072 kg |
| Cable Length | 495 mm |
| Spanner Size | 14 |
| Function | Sensor, exhaust gas temperature |
| Angle | 0 ° |
| Type | Sensor, exhaust gas temperature |
| Housing Colour | Black |
| Thread Size | M12 x 1.25 |
| Connector Shape | oval |
| Number of Poles | 2 -pin connector |
| Net weight | 0.048 kg |
Important compatibility info
| Net weight | 0.020 kg |
| Type | Sensor, intake air temperature |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Thread Size | N/A |
| Extra Description | Lucas Premium Blade |
| Weight | 0.150 kg |
| Function | Sensor, intake air temperature |
Important compatibility info
| Net weight | 0.020 kg |
| Type | Sensor, intake air temperature |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Thread Size | N/A |
| Extra Description | Lucas Premium Blade |
| Weight | 0.150 kg |
| Function | Sensor, intake air temperature |
Important compatibility info
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 62 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 114 mm |
| Number of Holes | 5 |
| Inspection Tag | 90R-02C0270/0251 |
| Outer diameter | 278 mm |
| Height | 43 mm |
Important compatibility info
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 62 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 114 mm |
| Number of Holes | 5 |
| Inspection Tag | 90R-02C0270/0251 |
| Outer diameter | 278 mm |
| Height | 43 mm |
Important compatibility info
| Function | Resistor, interior blower |
| Number of Poles | 6 -pin connector |
| Voltage | 12 V |
| Type | Resistor, interior blower |
| for OE number | 6441CE |
| Vehicle Equipment | for vehicles with automatic climate control |
Important compatibility info
| Function | Resistor, interior blower |
| Number of Poles | 6 -pin connector |
| Voltage | 12 V |
| Type | Resistor, interior blower |
| for OE number | 6441CE |
| Vehicle Equipment | for vehicles with automatic climate control |
Important compatibility info
| Length | 302 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSJ3642S |
| Cone Size | 16.1 mm |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Length | 302 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSJ3642S |
| Cone Size | 16.1 mm |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Seal Diameter | 55 mm |
| External Teeth, Wheel Side | 33 |
| Internal Teeth, wheel side | 35 |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Diameter | 88 mm |
| Length | 180 mm |
| Manufacturer | VAUXHALL |
| Model | ASTRA ZAFIRA |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Seal Diameter | 55 mm |
| External Teeth, Wheel Side | 33 |
| Internal Teeth, wheel side | 35 |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Diameter | 88 mm |
| Length | 180 mm |
| Manufacturer | VAUXHALL |
| Model | ASTRA ZAFIRA |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Type | Brake Caliper |
| for brake disc thickness | 27 mm |
| Brake System | ATE |
| Placement on Vehicle | in front of axle |
| for brake disc diameter | 282 mm |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Grey Cast Iron |
Important compatibility info
| Type | Brake Caliper |
| for brake disc thickness | 27 mm |
| Brake System | ATE |
| Placement on Vehicle | in front of axle |
| for brake disc diameter | 282 mm |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Grey Cast Iron |
Important compatibility info
| Piston diameter 1 | 57 mm |
| for brake disc thickness | 27 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| for brake disc diameter | 284 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Piston diameter 1 | 57 mm |
| for brake disc thickness | 27 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| for brake disc diameter | 284 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 22 mm |
| Manufacturer | MERCEDES |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Piston diameter 1 | 57 mm |
| Part number of recommended accessories | BBS12, BSC2 |
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 22 mm |
| Manufacturer | MERCEDES |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Piston diameter 1 | 57 mm |
| Part number of recommended accessories | BBS12, BSC2 |
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
Important compatibility info
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.044 kg |
| Function | Sensor, exhaust gas temperature |
| Length 2 | 28 mm |
| Connector Shape | Rectangular |
| Cable Length | 515 mm |
| Housing Colour | Brown |
| Number of Poles | 2 -pin connector |
| Weight | 0.144 kg |
| Type | Sensor, exhaust gas temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.044 kg |
| Function | Sensor, exhaust gas temperature |
| Length 2 | 28 mm |
| Connector Shape | Rectangular |
| Cable Length | 515 mm |
| Housing Colour | Brown |
| Number of Poles | 2 -pin connector |
| Weight | 0.144 kg |
| Type | Sensor, exhaust gas temperature |
Important compatibility info
| Length 1 | 810 mm |
| Cable Length | 245 mm. 285 mm. 425 mm. 465 mm |
| Ignition Coil | Connector Type DIN |
| Distributor/ Rotor | Connector Type DIN |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Length 1 | 810 mm |
| Cable Length | 245 mm. 285 mm. 425 mm. 465 mm |
| Ignition Coil | Connector Type DIN |
| Distributor/ Rotor | Connector Type DIN |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Function | Oxygen Sensor |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 430 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.090 kg |
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Function | Oxygen Sensor |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 430 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.090 kg |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Cable Length | 245 mm. 285 mm. 425 mm. 465 mm |
| Quantity | 5 |
| Length 1 | 800 mm |
| Type | Ignition Cable Kit |
| Net weight | 0.44 kg |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Cable Length | 245 mm. 285 mm. 425 mm. 465 mm |
| Quantity | 5 |
| Length 1 | 800 mm |
| Type | Ignition Cable Kit |
| Net weight | 0.44 kg |
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 2 | 20 mm |
| Thickness/Strength 1 | 20 mm |
| Paired article numbers | BMW116, JCA1033L, JCA1033R, JCW188, JCW192, JCW204 |
| Weight | 2.16 kg |
| Height 1 | 64 mm |
| Height 2 | 64 mm |
| Width 1 | 156 mm |
| Width 2 | 155 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 2 | 20 mm |
| Thickness/Strength 1 | 20 mm |
| Paired article numbers | BMW116, JCA1033L, JCA1033R, JCW188, JCW192, JCW204 |
| Weight | 2.16 kg |
| Height 1 | 64 mm |
| Height 2 | 64 mm |
| Width 1 | 156 mm |
| Width 2 | 155 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of mounting bores | 4 |
| Function | Brake Disc |
| Bore Diameter | 13 mm |
| Centering Diameter | 66 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 18.5 mm |
| Height | 34 mm |
| Outer diameter | 247 mm |
| Paired article numbers | JCP1378, JCP393, JCP876, NKR0008, NKR0064, NKR0065, NKR0126, NKR0148 |
| Surface | Coated |
| Rotor Style | Vented |
| Weight | 4.4 kg |
| Brake Disc Thickness | 20 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of mounting bores | 4 |
| Function | Brake Disc |
| Bore Diameter | 13 mm |
| Centering Diameter | 66 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 18.5 mm |
| Height | 34 mm |
| Outer diameter | 247 mm |
| Paired article numbers | JCP1378, JCP393, JCP876, NKR0008, NKR0064, NKR0065, NKR0126, NKR0148 |
| Surface | Coated |
| Rotor Style | Vented |
| Weight | 4.4 kg |
| Brake Disc Thickness | 20 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Net weight | 0.196 kg |
| Extra Description | Kerr Nelson |
| Function | Ignition Coil |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 3 -pin connector |
| Voltage | 12 V |
| Weight | 0.3 kg |
| Type | Ignition Coil |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























