Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Stroke | 200 mm |
| Eject Force | 560 N |
| Length | 580 mm |
| Extra Description | // LIFT-O-MAT® |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | both sides |
Additional Information
Technical Information
Winkelbleche wiederverwenden (rechts/links) brackets reuse (right/left)
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Height | 407 mm |
| Manufacturer | OPEL VAUXHALL |
| Model | COMBO CORSA MERIVA ZAFIRA |
| Shock Absorber System | Twin-Tube |
| Compression Height | 270 mm |
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Height | 407 mm |
| Manufacturer | OPEL VAUXHALL |
| Model | COMBO CORSA MERIVA ZAFIRA |
| Shock Absorber System | Twin-Tube |
| Compression Height | 270 mm |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Length | 151 mm |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 32 |
| Thread Size | M22X1.5 |
| Additional Information 2 | with groove |
| Seal Diameter | 61.2 mm |
| External Teeth, Wheel Side | 26 |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Length | 151 mm |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 32 |
| Thread Size | M22X1.5 |
| Additional Information 2 | with groove |
| Seal Diameter | 61.2 mm |
| External Teeth, Wheel Side | 26 |
Important compatibility info
| Length | 135 mm |
| Height | 40 mm |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Inner diameter | 12 mm |
| Width | 50 mm |
| Placement on Vehicle | Rear |
Important compatibility info
| Length | 135 mm |
| Height | 40 mm |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Inner diameter | 12 mm |
| Width | 50 mm |
| Placement on Vehicle | Rear |
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Bolt Hole Circle Diameter | 80 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 115 mm |
| Thickness | 21 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
| Replaces | 03627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03918)
- 6x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Bolt Hole Circle Diameter | 80 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 115 mm |
| Thickness | 21 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
| Replaces | 03627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03918)
- 6x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 253 mm |
| Thickness | 33 mm |
| Brake Disc Thickness | 10 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 253 mm |
| Thickness | 33 mm |
| Brake Disc Thickness | 10 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Length | 109 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Upper Front Axle, both sides |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
| Outer diameter | 50 mm |
| Length | 109 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Upper Front Axle, both sides |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
| Material | Plastic |
| Type | Cap, fuel tank |
| Function | Cap, fuel tank |
| Colour | green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Type | Cap, fuel tank |
| Function | Cap, fuel tank |
| Colour | green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Inner diameter | 12 mm |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Width | 50 mm |
| Length | 135 mm |
| Height | 40 mm |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Mounting, engine |
| Inner diameter | 12 mm |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Width | 50 mm |
| Length | 135 mm |
| Height | 40 mm |
| Placement on Vehicle | Rear |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Fuel Parts |
| Function | Lambda Sensor |
| Cable Length | 1040 mm |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Fuel Parts |
| Function | Lambda Sensor |
| Cable Length | 1040 mm |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Hose Length | 343 mm |
| Inner diameter 2 | 31 mm |
| Inner diameter 1 | 32 mm |
| Function | Radiator Hose |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Placement on Vehicle | Upper |
Important compatibility info
| Hose Length | 343 mm |
| Inner diameter 2 | 31 mm |
| Inner diameter 1 | 32 mm |
| Function | Radiator Hose |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Placement on Vehicle | Upper |
Important compatibility info
| Placement on Vehicle | Left, Lateral Mounting |
| Voltage | 12 V. 24 V |
| Number of Poles | 2 -pin connector |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
| Light Design | LED |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Registration Type | ADR/GGVS approved, ECE approved |
| Number of LEDs | 4 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Function | Oxygen Sensor |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Number of Poles | 3 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.136 kg |
| Cable Length | 1595 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.112 kg |
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Function | Oxygen Sensor |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Number of Poles | 3 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.136 kg |
| Cable Length | 1595 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.112 kg |
Important compatibility info
| Replaces | 64222 |
| Function | Oxygen Sensor |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 290 mm |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Net weight | 0.080 kg |
Important compatibility info
| Replaces | 64222 |
| Function | Oxygen Sensor |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 290 mm |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Net weight | 0.080 kg |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.138 kg |
| Cable Length | 790 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.114 kg |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.138 kg |
| Cable Length | 790 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.114 kg |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 510 mm |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Net weight | 0.116 kg |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 510 mm |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Net weight | 0.116 kg |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Additional Information | without accessories |
| Brake System | ATE |
| Diameter 1 | 48 mm |
| Brake Caliper Type | Floating Caliper |
| Paired article numbers | JBH2037, JCA1231R, JCP8079, JCP8165, REN303 |
| Weight | 2.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Additional Information | without accessories |
| Brake System | ATE |
| Diameter 1 | 48 mm |
| Brake Caliper Type | Floating Caliper |
| Paired article numbers | JBH2037, JCA1231R, JCP8079, JCP8165, REN303 |
| Weight | 2.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Additional Information | without accessories |
| Brake System | ATE |
| Diameter 1 | 48 mm |
| Brake Caliper Type | Floating Caliper |
| Paired article numbers | JBH2037, JCA1231L, JCP8079, JCP8165, REN303 |
| Weight | 2.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Additional Information | without accessories |
| Brake System | ATE |
| Diameter 1 | 48 mm |
| Brake Caliper Type | Floating Caliper |
| Paired article numbers | JBH2037, JCA1231L, JCP8079, JCP8165, REN303 |
| Weight | 2.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 1700 mm |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 3 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 1700 mm |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 3 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Weight | 0.4 kg |
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 350 mm |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Lambda Sensor |
Important compatibility info
| Weight | 0.4 kg |
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 350 mm |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 900 mm |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 900 mm |
| Connector Shape | Round |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 360 mm |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
| Net weight | 0.2 kg |
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 360 mm |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Weight | 0.4 kg |
| Type | Lambda Sensor |
Important compatibility info
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.139 kg |
| Cable Length | 1325 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.115 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Weight | 0.139 kg |
| Cable Length | 1325 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.115 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Ignition Coil | Connector Type DIN |
| Cable Length | 280 mm. 330 mm. 485 mm. 515 mm |
| Quantity | 4 |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.376 kg |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Ignition Coil | Connector Type DIN |
| Cable Length | 280 mm. 330 mm. 485 mm. 515 mm |
| Quantity | 4 |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.376 kg |
Important compatibility info
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























