Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.98
Important compatibility info
| Width | 18 mm |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 116 |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47999)
- 1x Febi Toothed Belt, power take-off (49234)
- 1x Febi Tensioner Pulley, timing belt (100320)
£117.02
Important compatibility info
| Width | 89 mm |
| Outer diameter | 123 mm |
| Type | Airbag Lifting Device Roll, lift axle |
| Function | Airbag Lifting Device Roll, lift axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.02
Important compatibility info
| Length | 98 mm |
| Number of Connectors / Ports | 4 |
| Function | Main Switch, battery |
| Type | Main Switch, battery |
| Hole Spacing | 59 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Number of Teeth | 27 |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Pipe Diameter | 70 mm. 41 mm |
| Min. Length | 217 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 13 mm |
| Max. Length | 279 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.08
Important compatibility info
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.08
Important compatibility info
| Function | Hydraulic Pump, steering |
| Length | 173 mm |
| Height | 123 mm |
| Width | 152 mm |
| Rotation Direction | Clockwise rotation |
| Mounting points diameter | 11 mm |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 50 10 600 046 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.10
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.10
Important compatibility info
| Spring Design | Leaf spring |
| Width | 104 mm |
| Type | Spring Pack |
| Number of spring leaves | 1 |
| Function | Spring Pack |
| Length | 715 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.12
Important compatibility info
| Extra Description | febi Plus |
| Heating / Cooling | with jiggle pin |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.12
Important compatibility info
| Outer diameter | 137 mm |
| Inner diameter | 50 mm |
| Inner diameter 1 | 12 mm |
| Function | Joint, propshaft |
| Screw length below head | 65 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| External Thread Size | M12 x 1,5 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (45722)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£117.14
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.20
Important compatibility info
| Material | Metal |
| Thickness | 10 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.20
Important compatibility info
| Function | Connecting Rod |
| Type | Connecting Rod |
| for OE number | 51.02400.6279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.24
Important compatibility info
| for OE number | ME200206 |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.30
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.32
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 335 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.33
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 532 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.34
Important compatibility info
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.37
Important compatibility info
| Belt Pulley Diameter | 56 mm |
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 120 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 5 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.38
Important compatibility info
| Length | 1130 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
£117.41
Important compatibility info
| Outer diameter | 194 mm |
| Thickness | 86 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.43
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.43
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Thickness | 290 mm. 405 mm |
| Outer diameter | 227 mm. 204 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with spring cotter |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.47
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.51
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Guide Rod |
| Steering arm type | Trailing Arm |
| Length | 565 mm |
| Outer diameter | 52 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.53
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 138 |
| Chain Type | Simplex, Closed chain |
| Timing Chain Size | G 53 HR |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (171786)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Guide, timing chain (30448)
£117.53
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Guide Rod |
| Thickness | 103 mm |
| Length | 1500 mm |
| Width | 62 mm |
| Pipe Diameter | 38 mm |
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 184 mm |
| Thickness | 560 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm, Triangular Control Arm (CV) |
| Paired article numbers | 182236 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Left Front |
| Max. Length | 305 mm |
| Min. Length | 285 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 50 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.56
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 210 mm |
| Width | 187 mm |
| Thickness | 127 mm |
| Operating Mode | Manual |
| Outer/Inner Mirror | Heatable |
| Type | Wide-Angle Mirror |
| Camber Radius | 300 mm |
| Function | Wide-Angle Mirror |
| Manufacturer | Mekra Lang |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.63
Important compatibility info
| Placement on Vehicle | Right |
| Length | 223 mm |
| Width | 187 mm |
| Thickness | 128 mm |
| Operating Mode | Manual |
| Outer/Inner Mirror | Heatable |
| Type | Wide-Angle Mirror |
| Camber Radius | 300 mm |
| Function | Wide-Angle Mirror |
| Manufacturer | Mekra Lang |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.63
Important compatibility info
| Inner length 2 | 770 mm |
| Inner length 1 | 810 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1039 mm |
| Outer length 2 | 1090 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.70
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.71
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Max. Length | 562 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Min. Length | 362 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.75
Important compatibility info
| Outer diameter | 228 mm. 215 mm |
| External Thread Size | M16 x 1,5, M10 x 1,5, M24 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 238 mm. 617 mm |
| Additional Information | with piston rod, with piston |
| Placement on Vehicle | non-steered leading axle |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.78
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm, Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information 2 | with ball joint |
| Paired article numbers | 182235 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.79
Important compatibility info
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.82
Important compatibility info
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.84
Important compatibility info
| for OE number | 03G 115 105 H |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.84
Important compatibility info
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Thickness | 51.7 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 30 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | perforated/vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.93
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.94
Important compatibility info
| Extra Description | Basic Short Kit |
| for OE number | 1 102 609 S5 |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36294)
- 1x Febi Tensioner, timing chain (36296)
- 1x Febi Guide, timing chain (40146)
- 1x Febi Guide, timing chain (36292)
- 1x Febi Guide, timing chain (170791)
- 1x Febi Guide, timing chain (170761)
£117.97
Important compatibility info
| Outer diameter | 390 mm |
| Rated Power | 90 W, 260 W |
| Number of Wings | 8 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.02
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Pipe Diameter | 80 mm. 70 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 699 mm |
| Min. Length | 409 mm |
| Replaces | 20167; 20612 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.04
Important compatibility info
| Number of grooves | 10 |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023