Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 568 mm |
| Steering arm type | Trailing Arm |
| Paired article numbers | 39693 |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Basic Short Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 06H 109 158 J S2 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45956)
- 1x Febi Tensioner, timing chain (49551)
- 1x Febi Guide, timing chain (102437)
- 1x Febi Guide, timing chain (102194)
- 1x Febi Guide, timing chain (102427)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 31 |
| Number of Teeth, ABS ring | 52 |
| Min. Length | 651 mm |
| ABS Ring Diameter | 88 mm |
| Wheel Sided Joint Diameter | 97.5 mm |
| Transmission-side joint diameter | 92.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Seal Material | Paper, Rubber |
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 1018 mm |
| Outer diameter | 30 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (34744)
- 6x Febi Screw (43595)
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 810 mm |
| Inner length 2 | 796 mm |
| Outer length 1 | 1146 mm |
| Outer length 2 | 1039 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Relay, glow plug system |
| Number of Connectors / Ports | 9 |
| for OE number | 12 37 783 |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 1706 426 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Min. Length | 562 mm |
| Additional Information 2 | with screw |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size 2 | 22 mm |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185610 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 628 mm |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| Paired article numbers | 182444 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 918 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 64 mm |
| Outer diameter | 166 mm |
| Additional Information 2 | with screw |
| Inner diameter | 35 mm |
| Parameter | 6PK + 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (178929)
- 1x Febi Pulley Bolt (185896)
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 22 11 6 860 482 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 199020 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41.94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 23939 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 23940 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Centering Diameter | 185 mm |
| Thickness | 129 mm |
| Brake Disc Thickness | 32 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Minimum thickness | 29 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 6 -Hole |
| Outer diameter | 330 mm |
| Bolt Hole Circle Diameter | 245 mm |
| Additional Information 2 | with ABS sensor ring |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35334)
- 1x Febi Fuel filter (39367)
- 1x Febi Air Filter (39258)
- 1x Febi Filter, cabin air (22009)
- 1x Febi Air Filter, compressor intake (38976)
- 1x Febi Urea Filter (35435)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 918 mm |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 85.2 mm |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1018 mm |
| Outer length 2 | 1020 mm |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 745 mm |
| Inner length 1 | 760 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 32 mm |
| Thickness | 62 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 349 mm |
| Brake Disc Thickness | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rolling piston material | Plastic |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M20 x 1,5, M12 x 1,5 |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 260 mm |
| Thickness | 239 mm. 516 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 140 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Spacer, kingpin (46058)
- 1x Febi Spacer, kingpin (46059)
- 1x Febi Spacer, kingpin (46060)
- 1x Febi Spacer, kingpin (46061)
- 1x Febi Spacer, kingpin (46062)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (46056)
Important compatibility info
| Number of Teeth | 136 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11222)
- 1x Febi Water Pump, engine cooling (24185)
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 137 |
| for OE number | 028 198 119 C S2 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14626)
Important compatibility info
| Additional Information | with drive rods |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (34722)
- 1x Febi Drive Shaft, oil pump (34785)
- 1x Febi Drive Shaft, oil pump (34786)
Important compatibility info
| Length | 200 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (107195)
Important compatibility info
| Number of Connectors / Ports | 6 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 183908 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Max. Length | 617 mm |
| Min. Length | 567 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Type | Washer Fluid Reservoir, window cleaning |
| Function | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 10.5 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 002 460 54 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Internal Thread Size | M16 x 1,5 |
| Number of Connectors / Ports | 2 |
| Height | 115 mm |
| Width | 120 mm |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 75 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front |
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing, with screw |
| Steering arm type | Control Arm |
| Paired article numbers | 196744 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102429)
- 1x Febi Bolt, control arm (177857)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower Front Axle, Left |
| Paired article numbers | 40306 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21739)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
Important compatibility info
| Type | Air Filter |
| Length | 362 mm |
| Height | 290 mm |
| Filter type | Filter Insert |
| Width | 124 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Driver Position | for right-hand drive vehicles |
| Voltage | 12 V |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bush, parabolic spring |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | V7 598 862 80 |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Additionally required parts | Inlet/intake hose for turbocharger |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
Technical Information
Please check and compare the connection diameter to the crankcase breather before installation.Due to different diameters of the crankcase ventilation connection on the valve cover, a new inlet hose must also be replaced on the turbocharger.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Shock Absorber |
| Pipe Diameter | 63.4 mm. 54 mm |
| Piston conrod diameter | 15 mm |
| Max. Length | 484 mm |
| Min. Length | 303 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 2 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 10 |
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Surface | Coated |
| Type | Brake Disc |
| Function | Brake Disc |
| Additional Information 2 | without ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40305 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Lower Front Axle, Right Front |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21740)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
Important compatibility info
| Hole Spacing | 100 mm |
| Placement on Vehicle | Front Axle |
| Length | 660 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















































