Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 186222 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.59
Important compatibility info
| Inner length 1 | 778 mm |
| Inner length 2 | 798 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1112 mm |
| Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.60
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.61
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Seal Material | Rubber |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 168 |
| for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
£100.62
Important compatibility info
| Length | 1735 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 32 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.65
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 31 |
| External Teeth, Diff.Side | 41 |
| Min. Length | 754 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 95.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.67
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 610 mm |
| Core Width | 541 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| External Thread Size | M14 x 1,5 |
| Cable Length | 479 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Paired article numbers | 176756 |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 556 mm |
| Core Width | 475 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 913 mm |
| Inner length 2 | 914 mm |
| Outer length 1 | 1215 mm |
| Outer length 2 | 1207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Additional Information | with rubber mounts |
| Length | 1045 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.73
Important compatibility info
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.73
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.73
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| External Thread Size | M18 x 1,5 |
| for OE number | 960 241 21 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.76
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Mounting points diameter | 8.5 mm |
| Number of mounting bores | 2 |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.76
Important compatibility info
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.78
Important compatibility info
| Number of Chain Links | 186 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.79
Important compatibility info
| Length | 206 mm |
| Width | 155 mm |
| Thickness | 92 mm |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.81
Important compatibility info
| Voltage | 12 V |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 11 |
| Rated Power | 2.1 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.81
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023