Important compatibility info
| Net weight | 0.224 kg |
| Function | Ignition Coil |
| Resistance | 0.8 Ohm |
| Connector Shape | Rectangular |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 3 -pin connector |
| Voltage | 12 V |
| Weight | 0.3 kg |
| Type | Ignition Coil |
Important compatibility info
| Function | Fuel Pump |
| Plug Type | Male |
| Pressure | 1.5 bar |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.845 kg |
| Type | Fuel Pump |
| Delivery Quantity | 155 l/h |
| Net weight | 0.798 kg |
Important compatibility info
| Function | Fuel Pump |
| Plug Type | Male |
| Pressure | 1.5 bar |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.845 kg |
| Type | Fuel Pump |
| Delivery Quantity | 155 l/h |
| Net weight | 0.798 kg |
Important compatibility info
| Net weight | 0.018 kg |
| Housing Colour | Blue |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Function | Sensor, intake air temperature |
| Weight | 0.024 kg |
| Type | Sensor, intake air temperature |
Important compatibility info
| Net weight | 0.018 kg |
| Housing Colour | Blue |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Function | Sensor, intake air temperature |
| Weight | 0.024 kg |
| Type | Sensor, intake air temperature |
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 2 | 18 mm |
| Thickness/Strength 1 | 18 mm |
| Height 2 | 60 mm |
| Paired article numbers | JCW261 |
| Weight | 1.6 kg |
| Additional Information | with accessories |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 1 | 59 mm |
| Width 1 | 116 mm |
| Width 2 | 116 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 2 | 18 mm |
| Thickness/Strength 1 | 18 mm |
| Height 2 | 60 mm |
| Paired article numbers | JCW261 |
| Weight | 1.6 kg |
| Additional Information | with accessories |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 1 | 59 mm |
| Width 1 | 116 mm |
| Width 2 | 116 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
Important compatibility info
| Net weight | 0.018 kg |
| Extra Description | Kerr Nelson |
| Function | Sender Unit, intake air temperature |
| Housing Colour | Blue |
| Technical Information Number | Intake Temp Sensor |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Weight | 0.024 kg |
| Type | Sender Unit, intake air temperature |
Important compatibility info
| Net weight | 0.018 kg |
| Extra Description | Kerr Nelson |
| Function | Sender Unit, intake air temperature |
| Housing Colour | Blue |
| Technical Information Number | Intake Temp Sensor |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Weight | 0.024 kg |
| Type | Sender Unit, intake air temperature |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Fuel Pump |
| Plug Type | Male |
| Pressure | 4 bar |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Fuel Line |
| Weight | 0.5 kg |
| Type | Fuel Pump |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Fuel Pump |
| Plug Type | Male |
| Pressure | 4 bar |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Fuel Line |
| Weight | 0.5 kg |
| Type | Fuel Pump |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 26 |
| Hub Profile | 21.9 x 20.1 |
| Outer diameter | 181 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 26 |
| Hub Profile | 21.9 x 20.1 |
| Outer diameter | 181 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
Important compatibility info
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
Important compatibility info
| Function | Ignition Distributor Cap |
| Manufacturer Restriction | Denso |
| Number of Inlets / Outlets | 4 |
| Weight | 0.18 kg |
| Connecting Angle | 90 ° |
| Type | Ignition Distributor Cap |
| Net weight | 0.188 kg |
| Extra Description | Lucas Premium Blade |
| Distributor/ Rotor | Connector Type DIN |
Important compatibility info
| Function | Ignition Distributor Cap |
| Manufacturer Restriction | Denso |
| Number of Inlets / Outlets | 4 |
| Weight | 0.18 kg |
| Connecting Angle | 90 ° |
| Type | Ignition Distributor Cap |
| Net weight | 0.188 kg |
| Extra Description | Lucas Premium Blade |
| Distributor/ Rotor | Connector Type DIN |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Inner diameter | 66 mm |
| Steering arm type | for control arm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Paired article numbers | EMS8537 |
| Type | Mounting, control/trailing arm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Inner diameter | 66 mm |
| Steering arm type | for control arm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Paired article numbers | EMS8537 |
| Type | Mounting, control/trailing arm |
Important compatibility info
| Width | 23 mm |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Length 1 | 905 mm |
| Number of Teeth | 95 |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC7300-1)
- 1x BGA Timing Belt (TB7300)
Important compatibility info
| Width | 23 mm |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Length 1 | 905 mm |
| Number of Teeth | 95 |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC7300-1)
- 1x BGA Timing Belt (TB7300)
Important compatibility info
| Placement on Vehicle | Left Rear |
| Function | Cable Pull, parking brake |
| Length 1 | 1956 mm |
| Type | Cable Pull, parking brake |
Important compatibility info
| Placement on Vehicle | Left Rear |
| Function | Cable Pull, parking brake |
| Length 1 | 1956 mm |
| Type | Cable Pull, parking brake |
Important compatibility info
| Outer diameter | 88 mm. 50 mm |
| Function | Bellow, driver cab suspension |
| Length | 300 mm |
| Type | Bellow, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 88 mm. 50 mm |
| Function | Bellow, driver cab suspension |
| Length | 300 mm |
| Type | Bellow, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Colour | Black |
| Inner diameter 2 | 53 mm |
| Type | Charge Air Hose |
| Material | PE (Polyethylene) |
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Colour | Black |
| Inner diameter 2 | 53 mm |
| Type | Charge Air Hose |
| Material | PE (Polyethylene) |
Important compatibility info
| Additional Information 2 | with bore for sensor |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information 2 | with bore for sensor |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Heater hose |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 57 mm |
| Inner diameter 2 | 57 mm |
| Hose Length | 480 mm |
| Type | Heater hose |
Important compatibility info
| Function | Heater hose |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 57 mm |
| Inner diameter 2 | 57 mm |
| Hose Length | 480 mm |
| Type | Heater hose |
Important compatibility info
| Length | 328 mm |
| Outer diameter | 108 mm |
| Placement on Vehicle | Rear Axle |
| Spring Design | Coil Spring |
| Weight | 1.58 kg |
| Thickness/Strength 1 | 11 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Extra Description | K-Flex |
Important compatibility info
| Length | 328 mm |
| Outer diameter | 108 mm |
| Placement on Vehicle | Rear Axle |
| Spring Design | Coil Spring |
| Weight | 1.58 kg |
| Thickness/Strength 1 | 11 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Extra Description | K-Flex |
Important compatibility info
Important compatibility info
| External Teeth, Wheel Side | 21 |
| Tripod Roller Diameter | 30 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Length | 623 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| External Teeth, Wheel Side | 21 |
| Tripod Roller Diameter | 30 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Length | 623 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Title | 4 Way Cassette Cable Reel - Red - 15m |
Additional Information
- Fitted 13A plug
- Maximum load 3120W
- Built in thermal cut out
- 15m cable
- 4 socket extension reel
Important compatibility info
| Function | Ignition Coil |
| Port / Connector type | 4 Terminal Plug |
| Ignition Coil | Flush-Fitting Pencil Ignition Coils |
| Type | Ignition Coil |
Important compatibility info
| Function | Ignition Coil |
| Port / Connector type | 4 Terminal Plug |
| Ignition Coil | Flush-Fitting Pencil Ignition Coils |
| Type | Ignition Coil |
Important compatibility info
| To be used with part number(s) | FK70217 |
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| Placement on Vehicle | Right Front |
Important compatibility info
| To be used with part number(s) | FK70217 |
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| Placement on Vehicle | Right Front |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 93 mm |
| Thread Size | M16X1.5 |
| External Teeth, Wheel Side | 36 |
| Seal Diameter | 59.5 mm |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 93 mm |
| Thread Size | M16X1.5 |
| External Teeth, Wheel Side | 36 |
| Seal Diameter | 59.5 mm |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
Important compatibility info
| Distance of fastening bolts | 110 mm |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5436 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Distance of fastening bolts | 110 mm |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5436 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Housing material | Aluminium |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Impeller Diameter | 61.4 mm |
| Water Pump Pulley Diameter | 87 mm |
Important compatibility info
| Housing material | Aluminium |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Impeller Diameter | 61.4 mm |
| Water Pump Pulley Diameter | 87 mm |
Important compatibility info
| Operating Mode | Electric |
| Function | Pressure converter, turbocharger |
| Type | Pressure converter, turbocharger |
Important compatibility info
| Operating Mode | Electric |
| Function | Pressure converter, turbocharger |
| Type | Pressure converter, turbocharger |
Important compatibility info
| Type | Breather Valve, fuel tank |
| Operating Mode | Electric |
| Function | Breather Valve, fuel tank |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























