Important compatibility info
| External Thread Size | M10 x 1,25 |
| Number of screws | 10 |
| Length | 119 mm |
| Outer diameter | 19 mm |
| Surface | Phosphatized |
| Thread Length | 43.4 mm |
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt |
| Type | Cylinder Head Bolt |
| Material | Steel |
| Spanner Size | 12 |
| Bolt Head/Nut Design | Polydrive |
| Screw length below head | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22550)
- 1x Febi Air Filter (04622)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 4x Febi Spark Plug (13515)
- 1x Febi Screw Plug, oil sump (03272)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Width | 71 mm |
| Height | 56 mm |
| Length | 162 mm |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber, Rubber/Metal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Seal Diameter | 71 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Outer diameter | 74 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | M22 x 1,5 |
| Replaces | 179963 |
| Height | 86 mm |
| Housing material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Rated Power | 180 W |
| Function | Interior Blower |
| Driver Position | for left-hand drive vehicles |
| Weight | 1.04 kg |
| Type | Interior Blower |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 227 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 124 mm |
| Function | Fuel filter |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
| Weight | 0.42 kg |
| for OE number | 642 090 60 52 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 124 mm |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, without water drain screw, with filter heating |
| Function | Fuel filter |
| Weight | 0.41 kg |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 161 mm |
| Outer diameter | 112 mm |
| Filter type | In-Line Filter |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 4 |
| Weight | 0.656 kg |
| Pipe Diameter | 8 mm. 10 mm |
| Type | Fuel Filter |
| Housing material | Metal |
| Function | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.45 kg |
| Height | 124 mm |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, with water drain screw, with filter heating |
| Type | Fuel filter |
| Function | Fuel filter |
| for OE number | 651 090 29 52 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 7 |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34311 |
| Surface | Phosphatized |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M15 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Replaces | 43218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 157 mm |
| Width | 88 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 550 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 480 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
| Length | 1375 mm |
| Paired article numbers | 109496 |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 108 mm |
| Outer diameter | 83 mm |
| Function | Oil Filter |
| Inner diameter | 28 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 13 mm |
| Additional Information 2 | with bolts/screws |
| Thickness | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 60 mm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (108377)
- 2x Febi Fastening Bolt, control arm (173406)
- 1x Febi Nut (103239)
- 1x Febi Nut (39159)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107464 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1040 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 658 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















