Important compatibility info
| Length | 694 mm. 681 mm |
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Type | Spring Pack |
| Function | Spring Pack |
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
| Inner diameter | 187 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
| Material | Steel |
| Number of Teeth, ABS ring | 100 |
| Outer diameter | 191 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Injector, urea injection |
| Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 611 142 03 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 46 mm |
| Inner diameter | 2.48 mm |
| Spanner Size | 24 |
| Colour Coding | Red |
| Function | Oil Pressure Switch |
| Screw length below head | 12 mm |
| Switch point from | 2.3 bar |
| Switch point to | 2.7 bar |
| Number of Connectors / Ports | 1 |
| External Thread Size | M10 x 1 |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| for OE number | 1 099 547 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 51 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 50 mm |
| Outer diameter | 96 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Left |
| Length | 384 mm |
| Height | 103 mm |
| Width | 298 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 328 mm |
| Height | 63 mm |
| Width | 215 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | C2D 56480 |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Front Axle |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 18.1 mm |
| External Thread Size | M16 x 1,5 |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Resistance | 550 Ohm |
| Number of Connectors / Ports | 2 |
| Cable Length | 1750 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 198213 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36.05 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 198212 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36.05 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 198420 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 33.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 33.88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Colour | Blue |
| Surface | Zinc-coated |
| Number of Connectors / Ports | 1 |
| External Thread Size | M10 x 1 |
| Function | Oil Pressure Switch |
| Switch point to | 0.55 bar |
| Switch point from | 0.3 bar |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1578 mm |
| Paired article numbers | 109238 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Brass |
| Voltage | 6 V. 12 V. 24 V |
| Inner diameter | 8.86 mm |
| Spanner Size | 24 |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Temperature range to | 120 °C |
| Function | Sensor, coolant temperature |
| Screw length below head | 16 mm |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Housing Colour | black |
| Type | Stop Light Switch |
| Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 640 mm |
| Paired article numbers | 24609 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Number of screws | 10 |
| Length | 119 mm |
| Outer diameter | 19 mm |
| Surface | Phosphatized |
| Thread Length | 43.4 mm |
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt |
| Type | Cylinder Head Bolt |
| Material | Steel |
| Spanner Size | 12 |
| Bolt Head/Nut Design | Polydrive |
| Screw length below head | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22550)
- 1x Febi Air Filter (04622)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 4x Febi Spark Plug (13515)
- 1x Febi Screw Plug, oil sump (03272)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Width | 71 mm |
| Height | 56 mm |
| Length | 162 mm |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber, Rubber/Metal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Seal Diameter | 71 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Outer diameter | 74 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | M22 x 1,5 |
| Replaces | 179963 |
| Height | 86 mm |
| Housing material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Rated Power | 180 W |
| Function | Interior Blower |
| Driver Position | for left-hand drive vehicles |
| Weight | 1.04 kg |
| Type | Interior Blower |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 227 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 124 mm |
| Function | Fuel filter |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, with filter heating |
| Type | Fuel filter |
| Weight | 0.42 kg |
| for OE number | 642 090 60 52 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 124 mm |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, without water drain screw, with filter heating |
| Function | Fuel filter |
| Weight | 0.41 kg |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 161 mm |
| Outer diameter | 112 mm |
| Filter type | In-Line Filter |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 4 |
| Weight | 0.656 kg |
| Pipe Diameter | 8 mm. 10 mm |
| Type | Fuel Filter |
| Housing material | Metal |
| Function | Fuel Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.45 kg |
| Height | 124 mm |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter, with water drain screw, with filter heating |
| Type | Fuel filter |
| Function | Fuel filter |
| for OE number | 651 090 29 52 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 7 |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34311 |
| Surface | Phosphatized |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M15 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Replaces | 43218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 157 mm |
| Width | 88 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 550 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 480 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
| Length | 1375 mm |
| Paired article numbers | 109496 |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 108 mm |
| Outer diameter | 83 mm |
| Function | Oil Filter |
| Inner diameter | 28 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 13 mm |
| Additional Information 2 | with bolts/screws |
| Thickness | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 60 mm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (108377)
- 2x Febi Fastening Bolt, control arm (173406)
- 1x Febi Nut (103239)
- 1x Febi Nut (39159)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107464 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1040 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 658 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Length | 512 mm |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 188.8 mm |
| Filter type | Screen Filter |
| Width | 174 mm |
| Additional Information 2 | with oil sump gasket |
| Height | 25 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (02180)
- 1x Febi Gasket, automatic transmission oil sump (08717)
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 40.5 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.2 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15276)
- 3x Febi Seal Ring, cylinder head cover bolt (15278)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 105 mm |
| Width | 54.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | incl. wear warning contact |
| Replaces | 116043 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Pollen Filter |
| Width | 218 mm |
| Height | 32 mm |
| Length | 278 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 91 mm |
| Outer diameter | 95 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 79 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































