Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 059 145 771 AA S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 104 |
| Placement on Vehicle | Right, Lower |
| Type | Timing Chain Kit |
| Timing Chain Size | G68VH |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain Tensioner, oil pump drive (40278)
- 1x Febi Chain, oil pump drive (39964)
- 1x Febi Gasket, timing case cover (102845)
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| for OE number | 004 151 79 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 58 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Type | Drive Shaft |
| Paired article numbers | 183786 |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 24 |
| ABS Ring Diameter | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 06A 115 105 B S2 |
| Additional Information | with chain tensioner |
| Timing Chain Size | G62 |
| Number of Chain Links | 50 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33636)
- 1x Febi Chain Tensioner, oil pump drive (33693)
- 1x Febi Oil Pump (22204)
Important compatibility info
| Type | Fuel Pump |
| Mounting points diameter | 6.5 mm |
| Function | Fuel Pump |
| Internal Thread Size | M16 x 1,5, M12 x 1,25 |
| Number of mounting bores | 2 |
| Number of Connectors / Ports | 3 |
| Operating Mode | Mechanical |
| Material | Steel |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Auxiliary water pump (cooling water circuit) |
| for OE number | 6R0 965 561 A |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 48 mm |
| Length | 860 mm |
| Additional Information 2 | with crown nut |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Type | Tie Rod |
| Paired article numbers | 178495 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm, Control Arm |
| Number of Holes | 4 |
| Material | Steel |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with crown nut |
| Outer diameter | 48 mm |
| Length | 860 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod |
| Function | Tie Rod |
| Paired article numbers | 178494 |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Ignition Coil | 4 Spark |
| Number of Connectors / Ports | 7 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Housing material | Cast Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 725 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cylinder Head Cover |
| for OE number | 651 010 08 30 |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Min. Length | 287 mm |
| Mounting points diameter | 12 mm |
| Max. Length | 363 mm |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 853 mm |
| Min. Length | 515 mm |
| Pipe Diameter | 76 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with axle nut |
| Placement on Vehicle | Front Axle Left |
| ABS Ring Diameter | 80 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M22x1,5 |
| Paired article numbers | 183820 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 615 mm |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Type | Alternator |
| Belt Pulley Diameter | 56 mm |
| Alternator Charge Current | 140 A |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193029 |
| Port / Connector type | ASS4 7 pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without licence plate light |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 541 200 14 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 174328 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 1K0 511 409 CA S1 |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174081)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Mounting points diameter | 9 mm |
| Number of Teeth | 18 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Material | Aluminium |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 193 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4. 2 |
| Function | Sender Unit, fuel tank |
| Screw length below head | 683 mm |
| for OE number | 81.27203.6021 |
| Type | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182978)
- 1x Febi Tensioner, timing chain (182785)
- 1x Febi Guide, timing chain (184483)
- 1x Febi Guide, timing chain (186313)
- 1x Febi Guide, timing chain (197409)
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 79 mm |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shock Absorber, steering |
| Thread Length | 27 mm |
| Colour | Black |
| Inner diameter | 14.1 mm |
| External Thread Size | M14 x 1,5 |
| Length | 560 mm |
| Material | Steel |
| Thickness | 112.5 mm |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 31 |
| Min. Length | 554 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Voltage | 12 V |
| Height | 84 mm |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100768)
- 1x Febi Gasket, throttle body (103796)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 637 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Alternator Charge Current | 70 A |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Vacuum Pump, braking system |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 5 0404 7580 |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197279 |
| Number of Connectors / Ports | 5. 2 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, eccentric shaft (variable valve lift) |
| Function | Sensor, eccentric shaft (variable valve lift) |
| Spanner Size | 10 |
| Number of Connectors / Ports | 9 |
| Bolt Head/Nut Design | External Hexagon |
| External Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 2 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 42147 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
| Number of Teeth | 41 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 245 mm |
| Inner diameter | 140 mm |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 290 mm |
| Width | 290 mm |
| Type | Wheel Hub |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 98. 70 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25404)
- 1x Febi Chain, intermediate shaft (09585)
- 1x Febi Tensioner, timing chain (32786)
- 1x Febi Tensioner, timing chain (25240)
- 1x Febi Guide, timing chain (25222)
- 1x Febi Guide, timing chain (34868)
- 1x Febi Guide, timing chain (36221)
- 1x Febi Guide, timing chain (45731)
- 1x Febi Sprocket, crankshaft (177087)
Important compatibility info
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Min. Length | 481 mm |
| Max. Length | 794 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














































