Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.95
Important compatibility info
| Length | 52 mm |
| Spanner Size | 27 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.09
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Max. Length | 679 mm |
| Min. Length | 427 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 60 mm. 50 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Function | Tilt Pump, driver cab |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Hole Spacing | 75 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185905 |
| Cone Size 2 | 28 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Colour Coding | Yellow |
| Number of Connectors / Ports | 2 |
| Type | Injector |
| Function | Injector |
| Additional Information | with gaskets/seals |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.28
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 573 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 63.5 mm. 73 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.28
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 24 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171101)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£128.33
Important compatibility info
| Function | Intermediate Steering Lever |
| Placement on Vehicle | Front Axle |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Intermediate Steering Lever |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Function | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Opening Pressure | 1.3 bar |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 93.5 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| External Teeth, Diff.Side | 28 |
| Min. Length | 1028 mm |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.43
Important compatibility info
| Bore Diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm, Control Arm |
| Number of Holes | 4 |
| Material | Steel |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.45
Important compatibility info
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| for OE number | 038 109 119 D S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21720)
- 1x Febi Water Pump, engine cooling (17938)
£128.49
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 168 |
| for OE number | 16 06 305 S2 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28375)
- 1x Febi Water Pump, engine cooling (17283)
£128.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
£128.53
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Replaces | 39593 |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HP, G68HR |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (38014)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Tensioner, timing chain (25408)
- 2x Febi Gear/Sprocket, camshaft (39526)
- 1x Febi Timing Chain (25444)
£128.53
Important compatibility info
| Combi Switch Function | with indicator function, with wipe-wash function, with wipe interval function, with high beam function, with hazard warning light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Thickness | 54.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 29.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67.1 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.56
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1036 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with lock nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.58
Important compatibility info
| Number of Teeth | 119 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (188804)
- 1x Febi Water Pump, engine cooling (36204)
£128.61
Important compatibility info
| Number of Teeth | 131 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Water pump impeller material | Plastic |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (183551)
- 1x Febi Water Pump, engine cooling (179522)
£128.62
Important compatibility info
| Extra Description | febi Plus |
| Length | 60 mm |
| Operating Mode | Mechanical |
| Spanner Size | 19 |
| Valve type | Pressure Limiting Valve |
| Function | Valve, fuel supply system |
| External Thread Size | M18 x 1,5 |
| Additional Information | with gasket/seal |
| Type | Valve, fuel supply system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.65
Important compatibility info
| Width | 46 mm |
| Outer diameter | 144 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30171)
- 4x Febi Pulley Bolt (33822)
£128.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 790 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 51 mm. 45 mm |
| Min. Length | 470 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.67
Important compatibility info
| Number of Connectors / Ports | 5 |
| Type | Control, swirl flaps (induction pipe) |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.85
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 1315 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.86
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.88
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.89
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 636 mm |
| Min. Length | 394 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 12 mm. 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.91
Important compatibility info
| Length | 1231 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (183223)
- 1x Febi Belt Tensioner, v-ribbed belt (184025)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (182534)
£128.93
Important compatibility info
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 44 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with nuts |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.93
Important compatibility info
| Thickness | 516 mm. 194 mm |
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 226 mm. 198 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M24 x 1,5, M16 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.93
Important compatibility info
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.95
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 78 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.03
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.06
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Control Unit, electric fan (engine cooling) |
| Function | Control Unit, electric fan (engine cooling) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.08
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.09
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.10
Important compatibility info
| Width | 78 mm |
| Outer diameter | 217 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.21
Important compatibility info
| Additional Information 2 | with spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.22
Important compatibility info
| Placement on Vehicle | Left |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Paired article numbers | 176649 |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.23
Important compatibility info
| Inner diameter | 36 mm |
| Width | 170 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.25
Important compatibility info
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.29
Important compatibility info
| Width | 75 mm |
| Outer diameter | 159 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 40 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (180489)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£129.36
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber |
| Pipe Diameter | 57 mm. 45 mm |
| Min. Length | 436 mm |
| Max. Length | 735 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.37
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.39
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023