Important compatibility info
| Paired article numbers | BFC1241 |
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 200 mm |
| Height | 34 mm |
| Length | 214 mm |
| Type | Filter, cabin air |
Important compatibility info
| Inner diameter | 12.2 mm |
| Diameter | 37.5 mm |
| Length | 59.6 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6204 |
Important compatibility info
| Inner diameter | 12.2 mm |
| Diameter | 37.5 mm |
| Length | 59.6 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6204 |
Important compatibility info
| Inner diameter | 29 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Inner diameter | 29 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Required quantity | 2 |
| Function | Warning Contact, brake pad wear |
| Length | 103 mm |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Required quantity | 2 |
| Function | Warning Contact, brake pad wear |
| Length | 103 mm |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Title | Aerial Lead Extension - 4.5m |
Additional Information
- Blister packed
- Male DIN plug
- Female DIN plug
- DIN antenna extension
Important compatibility info
| Title | Fascia Panel - Citroen Xsara Picasso - Single DIN |
Additional Information
When installing a new stereo or radio, you may find that there are still gaps between your dash and the stereo. If this is the case, you can make your interior more visually pleasing by installing a fascia to cover the gap up. This black fascia can be fitted in any Citroen Xsara Picasso manufactured since 2000.
Celsus specialise in Car Audio Accessories. They supply high quality and high performance products aimed at past, present and future generation auto technology. The Celsus range of vehicle fitting solutions is one of the most comprehensive available today addressing the demands of CAN Bus through to a vast range of Fascias, ISO leads, Stalk controllers and Antenna adaptors.
- Colour - Black
- Single DIN size
- Maintains the original look of the dashboard
- Fits certain Citroen vehicles
- Used when replacing a factory fitted stereo with an aftermarket unit
- Vehicle Applications: Citroen Xsara Picasso manufactured since 2000
Important compatibility info
| Pressure from | 0.19 bar |
| Thread Size | 1/4" x 18 NPTF |
| Number of Poles | 1 -pin connector |
| Spanner Size | 22 |
| Housing Colour | Black |
| Length | 37 mm |
| Function | Oil Pressure Switch |
| Type | Oil Pressure Switch |
| Pressure to | 0.58 bar |
Important compatibility info
| Pressure from | 0.19 bar |
| Thread Size | 1/4" x 18 NPTF |
| Number of Poles | 1 -pin connector |
| Spanner Size | 22 |
| Housing Colour | Black |
| Length | 37 mm |
| Function | Oil Pressure Switch |
| Type | Oil Pressure Switch |
| Pressure to | 0.58 bar |
Important compatibility info
| Length | 37 mm |
| Height | 22 mm |
| Distributor/ Rotor | no interference suppression |
| Function | Ignition Distributor Rotor |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Length | 37 mm |
| Height | 22 mm |
| Distributor/ Rotor | no interference suppression |
| Function | Ignition Distributor Rotor |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Replaces | 80001239 |
| Screw length below head | 70 mm |
| Thread Pitch 1 | 1.5 mm |
| Thread Size | M14 |
| Function | Bolt Set, crankshaft pulley |
| Type | Bolt Set, crankshaft pulley |
Important compatibility info
| Replaces | 80001239 |
| Screw length below head | 70 mm |
| Thread Pitch 1 | 1.5 mm |
| Thread Size | M14 |
| Function | Bolt Set, crankshaft pulley |
| Type | Bolt Set, crankshaft pulley |
Important compatibility info
| Weight | 31 g |
| Height | 108 mm |
| Outer diameter | 43 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Guarantee | 2 years warranty |
| Function | Fuel filter |
Important compatibility info
| Weight | 31 g |
| Height | 108 mm |
| Outer diameter | 43 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Guarantee | 2 years warranty |
| Function | Fuel filter |
Important compatibility info
| Length | 206 mm |
| Outer diameter | 55 mm |
| Pipe Diameter | 7.95 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 206 mm |
| Outer diameter | 55 mm |
| Pipe Diameter | 7.95 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Valve Seat |
| Function | Valve Seat |
| for OE number | 2 188 169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 203 mm. 154 mm |
| Height | 30 mm |
| Width | 156 mm |
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 203 mm. 154 mm |
| Height | 30 mm |
| Width | 156 mm |
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 123 mm |
| Inner diameter | 13 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 123 mm |
| Inner diameter | 13 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Material | Steel |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Silver |
| Rod/Strut | Coupling Rod |
| Spanner Size | 13 |
| Additional Information 2 | with washers, with nut |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 30 mm |
| Length | 146 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 32 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Material | Steel |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Silver |
| Rod/Strut | Coupling Rod |
| Spanner Size | 13 |
| Additional Information 2 | with washers, with nut |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 30 mm |
| Length | 146 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 32 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 9629860480 |
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 9629860480 |
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 29 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Inner diameter | 29 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Material | Plastic |
| for OE number | 037 121 121 F |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Material | Plastic |
| for OE number | 037 121 121 F |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Material | Plastic |
| for OE number | 074 121 132 B |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Material | Plastic |
| for OE number | 074 121 132 B |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Switch Point | 50 °C |
| Connector Shape | angular |
| Housing Colour | Green |
| Colour | Black |
| Spanner Size | 20 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.25 |
| Additional Information 2 | with switch |
| Weight | 0.04 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Switch Point | 50 °C |
| Connector Shape | angular |
| Housing Colour | Green |
| Colour | Black |
| Spanner Size | 20 |
| Number of Poles | 2 -pin connector |
| Thread Size | M14 x 1.25 |
| Additional Information 2 | with switch |
| Weight | 0.04 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Net weight | 0.008 kg |
| Extra Description | Fuel Parts |
| Function | Sensor, fuel temperature |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | AUXILLIARY |
| Number of Poles | 2 -pin connector |
| Spanner Size | 17 |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Weight | 0.014 kg |
| Type | Sensor, fuel temperature |
Important compatibility info
| Net weight | 0.008 kg |
| Extra Description | Fuel Parts |
| Function | Sensor, fuel temperature |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | AUXILLIARY |
| Number of Poles | 2 -pin connector |
| Spanner Size | 17 |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Weight | 0.014 kg |
| Type | Sensor, fuel temperature |
Important compatibility info
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Net weight | 0.028 kg |
| Type | Switch, reverse light |
Important compatibility info
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Net weight | 0.028 kg |
| Type | Switch, reverse light |
Important compatibility info
Important compatibility info
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Weight | 0.04 kg |
| Type | Switch, reverse light |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Switch, reverse light |
| Connector Shape | Oval |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Additional Information 2 | without cable |
| Weight | 0.04 kg |
| Type | Switch, reverse light |
Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 334 mm |
| Material | Cast Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaced by | KDL6582 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 334 mm |
| Material | Cast Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaced by | KDL6582 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Stop Light Switch |
| Connector Shape | angular |
| Housing Colour | Grey, Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 14 |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Weight | 0.026 kg. 0.05 kg |
| Type | Stop Light Switch |
| Net weight | 0.026 kg |
Important compatibility info
| Function | Stop Light Switch |
| Connector Shape | angular |
| Housing Colour | Grey, Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 14 |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 2 -pin connector |
| Thread Size | M10 x 1.25 |
| Weight | 0.026 kg. 0.05 kg |
| Type | Stop Light Switch |
| Net weight | 0.026 kg |
Important compatibility info
| Function | Stop Light Switch |
| Connector Shape | angular |
| Housing Colour | White |
| Technical Information Number | Circuit N.O./N.C. |
| Spanner Size | N/A |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 4 -pin connector |
| Thread Size | N/A |
| Net weight | 0.036 kg |
| Type | Stop Light Switch |
Important compatibility info
| Function | Stop Light Switch |
| Connector Shape | angular |
| Housing Colour | White |
| Technical Information Number | Circuit N.O./N.C. |
| Spanner Size | N/A |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 4 -pin connector |
| Thread Size | N/A |
| Net weight | 0.036 kg |
| Type | Stop Light Switch |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























