Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 1784 mm |
| Rod/Strut | Push Rod |
| Cone Size | 27.1 mm |
| Pipe Diameter | 62 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.32
Important compatibility info
| Width | 81 mm |
| Outer diameter | 153 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 40 mm |
| Parameter | 6 PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (174292)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£159.35
Important compatibility info
| Rated Power | 2.7 kW |
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.63
Important compatibility info
| Placement on Vehicle | Left, Upper Left |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.64
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with spring |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 84.7 mm |
| Wheel Sided Joint Diameter | 85.6 mm |
| Min. Length | 782 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
| Paired article numbers | 183675 |
| External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1698 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.77
Important compatibility info
| Width | 110 mm |
| Material | Aluminium |
| Outer diameter | 63 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.83
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.85
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Voltage | 12 V |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.87
Important compatibility info
| Function | Multi-Function Switch |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9. 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.88
Important compatibility info
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Replaces | 105005 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.89
Important compatibility info
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.08
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.11
Important compatibility info
| Function | Camshaft |
| for OE number | 13 02 053 58R |
| Type | Camshaft |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.11
Important compatibility info
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 61 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Length | 600 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.12
Important compatibility info
| Operating pressure to | 12 bar |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 4 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Inner diameter | 17 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.18
Important compatibility info
| Outer diameter | 430 mm |
| Number of Teeth | 10 |
| for OE number | 0 0190 4711 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.22
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£160.25
Important compatibility info
| Operating Mode | Electric |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Length | 894 mm |
| Number of Ribs | 6 |
| Additional Information | with clamping elements |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
- 1x Febi Plug (173377)
- 1x Febi Cap (174341)
£160.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023