Proud to be a UK-based company
Contact us
Important compatibility info
| Thickness | 155 mm. 489 mm |
| External Thread Size | 1/4" - 18 NPT, 3/4" - 16 UNF, 1/2 " 13 UNC |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 286 mm. 258 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.55
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (47890)
- 1x Febi Water Pump, engine cooling (171580)
- 1x Febi Toothed Belt, power take-off (49236)
£138.91
Important compatibility info
| Number of Teeth | 36 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.97
Important compatibility info
| Additional Information 2 | with seal ring, with bore for oil-level sensor |
| Wet Sump Material | Cast Aluminium |
| External Thread Size | M12 x 1,5 |
| Length | 456 mm |
| Additional Information | with oil drain plug |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| Additionally required parts | Sealant |
| Additionally recommended article | Mounting Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.02
Important compatibility info
| Placement on Vehicle | Upper, Left, Right |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Timing Chain Size | G80VCO |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Timing Chain (25165)
- 1x Febi Tensioner, timing chain (12510)
- 1x Febi Tensioner, timing chain (12511)
£139.26
Important compatibility info
| Running surface internal diameter | 172 mm |
| External diameter, clutch pressure plate | 365 mm |
| Hub fastening hole diameter | 12.0 mm |
| Hub internal diameter | 78 mm |
| Pitch circle diameter, clutch pressure plate | 345 mm |
| Number of hub fastening holes | 8 |
| Function | Flywheel |
| Pitch circle diameter, hub | 105 mm |
| Hub external diameter | 130 mm |
| Number of clutch pressure plate fastening holes | 8 |
| Number of Teeth | 125 |
| Additional Information | with starter motor sprocket |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Anticlockwise rotation |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| for OE number | 266 050 02 11 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Length | 785 mm |
| Width | 280 mm |
| Height | 285 mm |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Inner diameter 1 | 70 mm |
| Placement on Vehicle | Outer |
| Width | 37 mm |
| Outer diameter | 120 mm |
| Inner diameter | 70 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Width 1 | 43 mm |
| Outer diameter 1 | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (09876)
- 1x Febi Wheel Bearing Kit (174176)
£139.33
Important compatibility info
| Inner diameter | 39 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Width | 58 mm |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Type | Timing Chain Kit |
| for OE number | SH02-12-201 S1 |
| Number of Chain Links | 108 |
| Extra Description | Basic Short Kit |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49597)
- 1x Febi Tensioner, timing chain (175991)
- 1x Febi Guide, timing chain (174607)
- 1x Febi Guide, timing chain (174608)
£139.33
Important compatibility info
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 38 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| for OE number | 4211 5520 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 31 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Vehicle Main Current | for vehicles with 48V main current |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Number of mounting bores | 2 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.33
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.34
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 96 |
| Chain Type | Simplex, with chain lock |
| Surface | Coated |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HS-8, G68HS-9 |
| for OE number | 651 050 08 00 S7 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (25408)
- 1x Febi Timing Chain (47210)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Guide, timing chain (30258)
£139.47
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.51
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.51
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 157 mm |
| Width | 58 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 39 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (175024)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£139.69
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 58 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.80
Important compatibility info
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.89
Important compatibility info
| for OE number | 5705.EY |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.90
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Height | 148 mm |
| Width | 420 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193019 |
| Port / Connector type | ASS2.1 7 pin, 4 x 2 pin ASS2 |
| Number of Connectors / Ports | 15 |
| Light Function | with rear fog light, with reverse light, with indicator, with taillight, with stop light, with reflector (triangular), without licence plate light |
| Depth | 85 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.92
Important compatibility info
| Width | 16 mm |
| Number of Teeth | 118 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47947)
- 1x Febi Tensioner Pulley, timing belt (49559)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47600)
- 2x Febi Bolt, tensioner pulley (180196)
- 1x Febi Pulley Bolt (180540)
- 1x Febi V-Ribbed Belt (179058)
- 1x Febi Shaft Seal, crankshaft (47339)
- 2x Febi Bolt, camshaft gear (180539)
- 1x Febi Gasket, timing case (180636)
- 1x Febi Gasket, intake manifold (186617)
- 1x Febi Gasket, crankcase ventilation (186637)
- 2x Febi Seal Cap, camshaft (194043)
£139.94
Important compatibility info
| Number of Connectors / Ports | 8 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£139.95
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 58 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 24 mm |
| Outer diameter | 85 mm |
| Length | 1815 mm |
| Placement on Vehicle | Front Axle Right |
| Mounting points diameter | 24 mm |
| Rod/Strut | Pull Rod |
| Steering arm type | Trailing Arm |
| Hole Spacing | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.01
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 80 mm. 71 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Piston conrod diameter | 17 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 770 mm |
| Min. Length | 476 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Function | Shock Absorber |
| Min. Length | 415 mm |
| Pipe Diameter | 73 mm. 64 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 650 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 20 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 910 mm |
| Min. Length | 540 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 19 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 573 mm |
| Min. Length | 363 mm |
| Pipe Diameter | 51 mm. 39 mm |
| Mounting points diameter | 16 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 760 mm |
| Min. Length | 460 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Piston conrod diameter | 20 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 89 mm. 80 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Max. Length | 807 mm |
| Min. Length | 497 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Min. Length | 426 mm |
| Max. Length | 696 mm |
| Mounting points diameter | 24 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Pipe Diameter | 80 mm. 69 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.07
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.11
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with coupling rod |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 31.2 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174335)
- 2x Febi Mounting, stabiliser bar (23046)
- 1x Febi Link/Coupling Rod, stabiliser bar (21920)
- 1x Febi Link/Coupling Rod, stabiliser bar (21922)
- 4x Febi Nut (22263)
- 4x Febi Screw (21919)
£140.15
Important compatibility info
| Type | Air Tank, compressed-air system |
| Operating Pressure | 12.5 bar |
| Capacity | 36 l |
| Number of Connectors / Ports | 4 |
| Material | Steel |
| Length | 556 mm |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.21
Important compatibility info
| Number of Connectors / Ports | 21 |
| Combi Switch Function | with indicator function, with wipe-wash function, with rear wipe-wash function, with high beam function, with hazard warning light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.28
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 62 mm |
| Cone Size | 32 mm |
| Placement on Vehicle | Front Axle, Centre |
| External Thread Size | M27 x 1,5 |
| Length | 1735 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Function | Timing Chain Kit |
| for OE number | 55 352 124 |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33043)
- 1x Febi Tensioner, timing chain (33044)
- 1x Febi Guide, timing chain (106667)
- 1x Febi Guide, timing chain (173887)
- 1x Febi Guide, timing chain (173890)
- 1x Febi Oil Jet, timing chain (174153)
- 2x Febi Gear/Sprocket, camshaft (175738)
- 1x Febi Sprocket, crankshaft (174669)
- 2x Febi Bolt, camshaft gear (172269)
- 2x Febi Screw (33067)
- 2x Febi Screw (33068)
- 2x Febi Screw (33069)
£140.32
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Height | 84 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Fill Medium | Brake Fluid |
| Type | Clutch Booster |
| Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (30443)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
£140.32
Important compatibility info
| Length | 491 mm |
| Height | 247 mm |
| Width | 209 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 5 |
| Belt Pulley Diameter | 54 mm |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023