Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 16 mm |
| Additional Information | with oil, with oil filter, with oil drain plug |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (100325)
- 1x Febi Oil Filter (109139)
- 1x Febi Screw Plug, oil sump (48907)
- 1x Febi Engine Oil (108352)
£145.92
Important compatibility info
| Additional Information | with gasket/seal |
| Housing Type | without housing |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.93
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 745 mm |
| Min. Length | 456 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.01
Important compatibility info
| Pipe Diameter | 50 mm. 60 mm |
| Mounting points diameter | 20 mm. 24 mm |
| Max. Length | 705 mm |
| Min. Length | 435 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.01
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.05
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 184203 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.05
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| for OE number | 58 51 030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.12
Important compatibility info
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 58 mm |
| Outer diameter | 194 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32219)
- 1x Febi Centering Bolt, crankshaft pulley (33612)
- 1x Febi Washer, crankshaft pulley (33587)
£146.17
Important compatibility info
| Width | 75 mm |
| Outer diameter | 152 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 7 |
| Parameter | 8PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.17
Important compatibility info
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 136 mm |
| Thickness | 89 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 29 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 64 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Belt Pulley Diameter | 77 mm |
| Alternator Charge Current | 80 A |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Number of Ribs | 9 |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Master Cylinder, clutch |
| Number of Connectors / Ports | 2 |
| Bore Diameter | 24 mm |
| Fill Medium | Mineral Oil |
| Additional Information 2 | with sensor |
| Number of circuits | 1 |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Width | 64 mm |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 32 mm |
| Outer diameter | 85 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information | with gasket/seal |
| Replaces | 172491 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Right |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177798 |
| Operating Mode | Electric |
| Additional Information | with electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 177797 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 102 mm |
| Outer diameter | 168 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 60 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| for OE number | 77363827 SK |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.27
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 622 mm |
| Steering arm type | Trailing Arm |
| Bore Diameter | 19 mm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 48 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.27
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 659 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.27
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with brake fluid reservoir |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Driver Position | for right-hand drive vehicles |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.29
Important compatibility info
| Paired article numbers | 183899 |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.30
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Replaces | 191802 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.47
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.47
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Tensioner, timing belt |
| Function | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.59
Important compatibility info
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Timing Belt (48288)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£146.69
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.72
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.85
Important compatibility info
| Outer diameter | 79 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 30 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.89
Important compatibility info
| Additional Information 2 | with valves |
| Type | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
| Function | Bearing Bracket, camshaft |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (176249)
- 2x Febi Control Valve, camshaft adjustment (180080)
- 2x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171915)
£146.89
Important compatibility info
| Paired article numbers | 176931 |
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.97
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 130 A |
| Belt Pulley Diameter | 65 mm |
| Current Strength | 130 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.03
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.11
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.12
Important compatibility info
| Width | 44 mm |
| Inner diameter | 94 mm |
| Number of Ribs | 6. 8 |
| Outer diameter 1 | 168 mm |
| Parameter | 4PK + 6PK |
| Outer diameter 2 | 144 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.20
Important compatibility info
| for OE number | 002 091 97 01 |
| Additional Information | with fastening/mounting material |
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.21
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with screw |
| Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171957)
- 1x Febi Bolt, camshaft gear (173250)
£147.24
Important compatibility info
| Paired article numbers | 08747 |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Width of castor bearing surface | 35 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Outer diameter | 81 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Length | 1025 mm |
| Outer diameter | 60 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 28.8 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 153 mm |
| Thickness | 111 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Inner diameter | 38 mm |
| Width | 85 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| for OE number | 010 154 92 02 |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Number of Chain Links | 180 |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| for OE number | 50 01 855 204 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 3285 mm |
| Inner length 1 | 2855 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Paired article numbers | 175990 |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 238 mm. 227 mm |
| Thickness | 460 mm. 260 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M16 x 1,5, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 84 °C |
| Outer diameter | 61.1 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Length | 610 mm |
| Material | Steel |
| Hole Spacing | 152 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023