Important compatibility info
| Placement on Vehicle | Rear |
| Type | Door Lock, driver cab |
| Function | Door Lock, driver cab |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with synthetic grease |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Outer diameter | 280 mm |
| Number of Teeth | 10 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Pressure Plate (105306)
- 1x Febi Clutch Disc (105022)
- 1x Febi Clutch Release Bearing (105434)
Important compatibility info
| Additional Information | with solenoid valve |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump, with seal ring |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Additional Information | with electric motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 2 |
| for OE number | 11 12 8 578 811 |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal, with adjuster |
| Material | Plastic |
| Colour | black |
| Number of Connectors / Ports | 5 |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (175771)
- 1x Febi Control, swirl flaps (induction pipe) (192964)
Important compatibility info
| Length | 889 mm |
| Outer diameter | 50 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 656 mm |
| Mounting points diameter | 16 mm. 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Seal Material | Metal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 24 |
| for OE number | 2 399 800 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Outer diameter | 430 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1398.5 mm |
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 26 mm |
| Type | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Air Suspension Valve |
| Internal Thread Size | M16 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Voltage | 12 V |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Steering arm type | Triangular Control Arm (CV) |
| Pipe Diameter | 46 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 47 ° |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex |
| Number of Chain Links | 120 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Additional Information | with fuel sender unit |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 16 mm |
| Additional Information | with oil, with oil filter, with oil drain plug |
| Number of Teeth | 118 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (183696)
- 1x Febi Screw Plug, oil sump (180960)
- 1x Febi Seal Ring, oil drain plug (44850)
- 1x Febi Oil Filter (32223)
- 1x Febi Engine Oil (172189)
Important compatibility info
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 125 mm |
| Function | Compressor, air conditioning |
| Type | Compressor, air conditioning |
| Oil Fill Quantity | 300 ml |
| Voltage | 24 V |
| Number of grooves | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 81.30301.0611 |
| Function | Clutch Disc |
| Type | Clutch Disc |
| Number of Teeth | 10 |
| Outer diameter | 395 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
| Number of Teeth | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with slide rails, with chain tensioner |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 94 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49716)
- 1x Febi Tensioner, timing chain (104341)
- 1x Febi Guide, timing chain (108952)
- 1x Febi Guide, timing chain (108953)
- 1x Febi Guide, timing chain (108954)
- 1x Febi Guide, timing chain (105996)
Important compatibility info
| Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with starter motor sprocket |
| for OE number | 51.02301.7434 |
| Number of Teeth | 129 |
| Function | Flywheel |
| Pitch circle diameter, hub | 85 mm |
| Hub internal diameter | 60 mm |
| Number of clutch pressure plate fastening holes | 9 |
| Hub external diameter | 120 mm |
| Running surface internal diameter | 190 mm |
| External diameter, clutch pressure plate | 371 mm |
| Hub fastening hole diameter | 15.0 mm |
| Pitch circle diameter, clutch pressure plate | 368 mm |
| Number of hub fastening holes | 8 |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Wheel Hub |
| Function | Wheel Hub |
| Placement on Vehicle | Front Axle, steered trailing axle left, steered trailing axle right, non-steered trailing axle left, non-steered trailing axle right |
| Bolt Hole Circle Diameter | 335 mm |
| Outer diameter | 375 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 127 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 93179213 S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Additional Information 2 | with cable |
| Type | EGR Valve |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| for OE number | 06H 109 021 K |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Extra Description | febi Plus |
| Material | Plastic |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 55213493 S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Unit, ALB |
| Type | Control Unit, ALB |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
| Operating Mode | Pneumatic |
| Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex, Closed chain |
| for OE number | 1 102 609 S6 |
| Type | Timing Chain Kit |
| Number of Chain Links | 132 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36294)
- 1x Febi Tensioner, timing chain (36296)
- 1x Febi Guide, timing chain (40146)
- 1x Febi Guide, timing chain (36292)
- 1x Febi Guide, timing chain (170791)
- 1x Febi Guide, timing chain (170761)
- 2x Febi Gear/Sprocket, camshaft (176499)
- 1x Febi Sprocket, crankshaft (176500)
- 1x Febi Gear, injection pump (175988)
- 1x Febi Shaft Seal, crankshaft (103216)
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter set (172660)
- 1x Febi Urea Filter (107821)
- 1x Febi Air Filter (32267)
- 1x Febi Filter, cabin air (29804)
- 1x Febi Oil Filter (49866)
Important compatibility info
| for OE number | 15 19 287 76R S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Valve type | Rotary-knob Valve |
| Type | Control, swirl flaps (induction pipe) |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Max. Length | 858 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Min. Length | 516 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Type | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | without free-wheel belt pulley |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 100 ml |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Compressor, air conditioning |
| Voltage | 24 V |
| Belt Pulley Diameter | 120 mm |
| Oil Fill Quantity | 240 ml |
| Number of grooves | 10 |
| Pulleys | with belt pulley |
| Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 06 36 260 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33043)
- 1x Febi Tensioner, timing chain (33044)
- 1x Febi Guide, timing chain (173890)
- 1x Febi Guide, timing chain (106667)
- 1x Febi Guide, timing chain (173887)
- 1x Febi Oil Jet, timing chain (174153)
- 2x Febi Screw (33067)
- 2x Febi Screw (33068)
- 2x Febi Screw (33069)
Important compatibility info
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 212 320 04 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 650 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 36 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| for OE number | 51.95800.7481 |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 5.5 kW |
| Function | Starter |
| Voltage | 24 V |
| Number of Teeth | 11 |
| Type | Starter |
| for OE number | 22807178 |
| Replaces | 48996 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Stroke | 175 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Placement on Vehicle | Right Rear |
| Length | 659 mm |
| Paired article numbers | 179300 |
| Housing Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Exhaust Side, Left, for cylinder 5-8 |
| Inner diameter | 13 mm |
| Number of Teeth | 42 |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| for OE number | 11 36 7 512 182 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































