Important compatibility info
Type | Valve, crankcase ventilation |
Function | Valve, crankcase ventilation |
Placement on Vehicle | Right |
Extra Description | febi Plus |
Colour | Red, Black |
Material | FVMQ [fluorosilicone rubber), Plastic |
Additional Information
Technical Information
Kit contains 1 diaphragm and 1 cap. For the 8 cylinder 5ltr engine 2 diaphragms and 2 caps (1 per each cylinder bank) are needed. In this case please order 2 kits.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Type | Hose, crankcase ventilation |
Extra Description | febi Plus |
Function | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | engine sided |
Width | 45 mm |
Outer diameter | 72 mm |
Inner diameter | 16 mm |
Number of Ribs | 6 |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 154 |
Type | Timing Chain |
Part number of the recommended special tools | 193083 |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Type | Breather Valve, fuel tank |
Function | Breather Valve, fuel tank |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Type | Breather Valve, fuel tank |
Function | Breather Valve, fuel tank |
Extra Description | febi Plus |
Additional Information 2 | with connection line, with retaining strap |
for OE number | 06J 133 781 CE |
Valve type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle |
Length | 105 mm |
Width | 74.8 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Cable Length | 215 mm |
Thickness/Strength 1 | 18 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Camshaft |
Type | Camshaft |
Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 98 088 386 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side, Right |
Type | Camshaft Adjuster |
Extra Description | febi Plus |
Function | Camshaft Adjuster |
Number of Teeth | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rotor Set, oil pump |
Function | Rotor Set, oil pump |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side |
Internal Thread Size | M10 x 1,5 |
for OE number | 0801.EZ |
Type | Camshaft |
Function | Camshaft |
Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter Set, cabin air |
Filter type | Pollen Filter |
Length | 328 mm |
Height | 29.5 mm |
Width | 172 mm |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 144 mm |
Placement on Vehicle | Lower Front Axle, Left |
Material | Rubber/Metal |
Outer diameter | 75 mm |
Thickness | 34 mm |
Inner diameter | 18 mm |
Paired article numbers | 21471 |
Colour Coding | Red |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21461)
- 1x Febi Mounting, control/trailing arm (06662)
Important compatibility info
Placement on Vehicle | Lower Front Axle, Right |
Width | 145 mm |
Material | Rubber/Metal |
Outer diameter | 76 mm. 60 mm |
Thickness | 34 mm |
Inner diameter | 18 mm |
Paired article numbers | 21468 |
Colour Coding | Green |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21462)
- 1x Febi Mounting, control/trailing arm (04064)
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Width | 145 mm |
Material | Rubber/Metal |
Outer diameter | 76 mm |
Thickness | 33 mm |
Inner diameter | 18 mm |
Paired article numbers | 21469 |
Colour Coding | Green |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21461)
- 1x Febi Mounting, control/trailing arm (04064)
Important compatibility info
Number of Teeth | 22 |
Engine Management | Timing Belt |
Function | Sprocket, crankshaft |
Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hydraulic Filter Kit, automatic transmission |
Filter type | Screen Filter |
Width | 134 mm |
Additional Information 2 | with oil sump gasket |
Seal Material | Rubber |
Function | Hydraulic Filter Kit, automatic transmission |
Height | 36 mm |
Length | 158 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (08716)
- 1x Febi Hydraulic Filter, automatic transmission (06445)
- 1x Febi Seal Ring, oil screen (06436)
- 2x Febi Seal Ring, oil screen (06435)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 26 mm |
Outer diameter | 80 mm |
Inner diameter | 45 mm |
Function | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (02467)
- 1x Febi Shaft Seal, wheel hub (02469)
- 1x Febi Seal Ring (02471)
- 6x Febi Nut (02473)
- 1x Febi Seal, axle cap (02474)
Important compatibility info
Function | Linkage Damper, injection system |
Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Duplex, with chain lock |
Number of Chain Links | 198 |
Timing Chain Size | D67ZN |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 151.4 mm |
Width | 52.5 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.3 mm. 17.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 145 mm |
Width | 61.2 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.1 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 128.9 mm |
Width | 48 mm |
Wear Warning Contact | excl. wear warning contact |
Thickness/Strength 1 | 19.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Model | 2 COURIER FIESTA FUSION KA PUMA |
Placement on Vehicle | Front Axle |
Length | 150.2 mm. 151.2 mm |
Width | 60.5 mm. 57.7 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.9 mm |
Function | Brake Pad Set, disc brake |
Manufacturer | FORD MAZDA |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 129.9 mm |
Width | 56.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 61.7 mm |
Width | 56.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Thickness/Strength 1 | 15 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 248 mm |
Height | 30 mm |
Width | 216 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Rubber |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 315 mm |
Height | 30 mm |
Width | 97 mm |
Filter type | Pollen Filter |
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 204 mm |
Height | 40 mm |
Width | 178 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with rounded tooth profile |
Width | 26 mm |
Number of Teeth | 124 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17220)
- 1x Febi Tensioner Pulley, timing belt (24767)
Important compatibility info
Function | Shaft Seal, wheel hub |
Inner diameter | 51.5 mm |
Outer diameter | 100 mm |
Material | NBR (nitrile butadiene rubber) |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Shaft Seal, wheel hub |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Placement on Vehicle | Right |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Type | Oil Pump |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (32302)
- 1x Febi Gasket, oil pump (36341)
Important compatibility info
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Replaces | 104406 |
Type | Mounting, engine |
for OE number | 1 857 733 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 44 mm |
Inner diameter | 13 mm |
Number of Teeth | 38 |
Paired article numbers | 47571 |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Placement on Vehicle | Exhaust Side |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (40171)
- 1x Febi Screw (27388)
- 1x Febi Nut (14392)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Nut (38209)
- 1x Febi Rolling Bearing, suspension strut support mount (44799)
- 2x Febi Nut (103239)
Important compatibility info
Material | FPM (fluoride rubber) |
Outer diameter | 48 mm |
Thickness | 7 mm |
Inner diameter | 41 mm |
Type | Gasket, oil pump |
Function | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Filter type | Filter Insert |
Width | 93 mm |
Height | 49 mm |
Length | 333 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.5 mm |
Width | 74 mm |
Length | 97 mm |
Placement on Vehicle | Front Axle |
Wear Warning Contact | incl. wear warning contact |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 20 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Length | 175 mm |
Width | 69 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 1055 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pump, fuel pre-supply |
Length | 125 mm |
Width | 90 mm |
Thickness | 95 mm |
Inner diameter | 31 mm |
Number of Holes | 3 |
Bolt Hole Circle Diameter | 6 mm |
Internal Thread Size | 2 x M12 x 1,5 |
Type | Pump, fuel pre-supply |
Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 105.3 mm |
Valve seat angle | 45 ° |
Valve stem diameter | 6 mm |
Valve head diameter | 30.5 mm |
Function | Intake Valve |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 43544 |
Steering arm type | Control Arm |
Inner diameter | 12 mm |
Placement on Vehicle | Rear Axle Right, Upper, Front |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts, with rubber mounts |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36401)
- 1x Febi Screw (38098)
- 2x Febi Nut (34653)
- 1x Febi Bolt, control arm (43442)
Important compatibility info
Material | Aluminium |
Outer diameter | 70 mm |
Function | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Housing material | Aluminium |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 670 mm |
Paired article numbers | 44335 |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill Medium | Brake Fluid |
Function | Clutch Booster |
Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023