Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Material | Steel |
| Thread Size | M16 X 1.5 |
| Spanner Size | 21 |
| Colour | silver |
| Thread Length | 25 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Type | Wheel Bolt |
| Rims | for steel rims, for light alloy rims |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Bolt |
| Total Length | 64 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Material | Steel |
| Thread Size | M16 X 1.5 |
| Spanner Size | 21 |
| Colour | silver |
| Thread Length | 25 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Type | Wheel Bolt |
| Rims | for steel rims, for light alloy rims |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Bolt |
| Total Length | 64 mm |
Important compatibility info
| Length | 52 mm |
| Function | Gasket, intake manifold |
| Width | 46 mm |
| Type | Gasket, intake manifold |
Important compatibility info
| Length | 52 mm |
| Function | Gasket, intake manifold |
| Width | 46 mm |
| Type | Gasket, intake manifold |
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 54 mm |
| Diameter From | 62 mm |
| Quantity | 1 |
Important compatibility info
| Title | Aerial Adaptor - Male |
Additional Information
When fitting a new radio/ stereo, you will need to convert the plug on the end of the aerial to the correct fitment for your new unit. This is done through an antenna adaptor. This male adaptor can be used in a large range of vehicles so please refer to the technical details for a full application listing.
Celsus specialise in Car Audio Accessories. They supply high quality and high performance products aimed at past, present and future generation auto technology. The Celsus range of vehicle fitting solutions is one of the most comprehensive available today addressing the demands of CAN Bus through to a vast range of Fascias, ISO leads, Stalk controllers and Antenna adaptors.
- Blister packed
- Simple installation requiring no tools
- Push fit
- Required when fitting an aftermarket stereo
- Male DIN antenna adaptor
Important compatibility info
| Title | Aux interface - 3.5mm Jack Cable - 1.2m |
Additional Information
- 1.2m in length
- Transmits stereo audio signal
- Allows connection of external devices (MP3 players etc.) to a stereo with aux input connection
Important compatibility info
| for OE number | 90 500 007 |
| Material | Plastic |
| Function | Cap, coolant tank |
| Colour | Yellow |
| Opening Pressure | 1.4 bar |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 90 500 007 |
| Material | Plastic |
| Function | Cap, coolant tank |
| Colour | Yellow |
| Opening Pressure | 1.4 bar |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | FKM (fluorocarbon rubber) |
| Type | Seal Ring |
| Function | Seal Ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Inner diameter | 29 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Inner diameter | 29 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 25 mm |
| Width | 32 mm |
| Material | Rubber |
| Thickness | 33 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 25 mm |
| Width | 32 mm |
| Material | Rubber |
| Thickness | 33 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Screw length below head | 30 mm |
| Outer diameter | 22.5 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | External Hexagon |
| Thread Length | 22 mm |
| Surface | Zink flake coated |
| Spanner Size | 17 |
| Material | Steel |
| Length | 52 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Rims | for light alloy rims |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Screw length below head | 30 mm |
| Outer diameter | 22.5 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | External Hexagon |
| Thread Length | 22 mm |
| Surface | Zink flake coated |
| Spanner Size | 17 |
| Material | Steel |
| Length | 52 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Rims | for light alloy rims |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 1 -pin connector |
| Thread Size | 1/4" x 18 NPTF |
| Weight | 0.04 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.C. |
| Spanner Size | 22 |
| Number of Poles | 1 -pin connector |
| Thread Size | 1/4" x 18 NPTF |
| Weight | 0.04 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Net weight | 0.028 kg |
| Extra Description | Fuel Parts |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 22 |
| Number of Poles | 1 -pin connector |
| Thread Size | M10 x 1 |
| Weight | 0.034 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Net weight | 0.028 kg |
| Extra Description | Fuel Parts |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 22 |
| Number of Poles | 1 -pin connector |
| Thread Size | M10 x 1 |
| Weight | 0.034 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Inner diameter 2 | 30 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 165 mm |
| Colour | Black |
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 30 mm |
Important compatibility info
| Inner diameter 2 | 30 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 165 mm |
| Colour | Black |
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 30 mm |
Important compatibility info
| Function | Contact Breaker, ignition distributor |
| Manufacturer Restriction | Denso |
| Weight | 0.03 kg |
| Net weight | 0.020 kg |
| Type | Contact Breaker, ignition distributor |
Important compatibility info
| Function | Contact Breaker, ignition distributor |
| Manufacturer Restriction | Denso |
| Weight | 0.03 kg |
| Net weight | 0.020 kg |
| Type | Contact Breaker, ignition distributor |
Important compatibility info
| Function | Contact Breaker, ignition distributor |
| Manufacturer Restriction | Denso |
| Additional Information 2 | with ventilation slots |
| Weight | 0.03 kg |
| Type | Contact Breaker, ignition distributor |
| Net weight | 0.020 kg |
Important compatibility info
| Function | Contact Breaker, ignition distributor |
| Manufacturer Restriction | Denso |
| Additional Information 2 | with ventilation slots |
| Weight | 0.03 kg |
| Type | Contact Breaker, ignition distributor |
| Net weight | 0.020 kg |
Important compatibility info
| Function | Capacitor, ignition system |
| Manufacturer Restriction | Mitsubishi |
| Cable Length | 158 mm |
| Weight | 0.03 kg |
| Type | Capacitor, ignition system |
| Net weight | 0.016 kg |
Important compatibility info
| Function | Capacitor, ignition system |
| Manufacturer Restriction | Mitsubishi |
| Cable Length | 158 mm |
| Weight | 0.03 kg |
| Type | Capacitor, ignition system |
| Net weight | 0.016 kg |
Important compatibility info
| Net weight | 0.024 kg |
| Function | Capacitor, ignition system |
| Manufacturer Restriction | Bosch |
| Weight | 0.030 kg |
| Cable Length | 425 mm |
| Type | Capacitor, ignition system |
Important compatibility info
| Net weight | 0.024 kg |
| Function | Capacitor, ignition system |
| Manufacturer Restriction | Bosch |
| Weight | 0.030 kg |
| Cable Length | 425 mm |
| Type | Capacitor, ignition system |
Important compatibility info
| Function | Ignition Distributor Cap |
| Number of Inlets / Outlets | 5 |
| Manufacturer Restriction | Femsa |
| Weight | 0.18 kg |
| Net weight | 0.152 kg |
| Type | Ignition Distributor Cap |
| Connecting Angle | 90 ° |
| Distributor/ Rotor | Connector Type DIN |
Important compatibility info
| Function | Ignition Distributor Cap |
| Number of Inlets / Outlets | 5 |
| Manufacturer Restriction | Femsa |
| Weight | 0.18 kg |
| Net weight | 0.152 kg |
| Type | Ignition Distributor Cap |
| Connecting Angle | 90 ° |
| Distributor/ Rotor | Connector Type DIN |
Important compatibility info
| Function | Ignition Distributor Cap |
| Manufacturer Restriction | Hitachi |
| Number of Inlets / Outlets | 5 |
| Net weight | 0.152 kg |
| Weight | 0.2 kg |
| Distributor/ Rotor | Connector Type DIN |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Cap |
| Manufacturer Restriction | Hitachi |
| Number of Inlets / Outlets | 5 |
| Net weight | 0.152 kg |
| Weight | 0.2 kg |
| Distributor/ Rotor | Connector Type DIN |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Magneti Marelli |
| Distributor/ Rotor | no interference suppression |
| Net weight | 0.034 kg |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Magneti Marelli |
| Distributor/ Rotor | no interference suppression |
| Net weight | 0.034 kg |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Weight | 0.03 kg |
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | PAL |
| Type | Condenser, ignition |
Important compatibility info
| Weight | 0.03 kg |
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | PAL |
| Type | Condenser, ignition |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Mitsubishi |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Mitsubishi |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Mitsubishi |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Condenser, ignition |
| Manufacturer Restriction | Mitsubishi |
| Weight | 0.03 kg |
| Type | Condenser, ignition |
Important compatibility info
| Weight | 0.030 kg |
| Type | Condenser, ignition |
| Manufacturer Restriction | Bosch |
| Function | Condenser, ignition |
| Extra Description | Kerr Nelson |
| Net weight | 0.024 kg |
Important compatibility info
| Weight | 0.030 kg |
| Type | Condenser, ignition |
| Manufacturer Restriction | Bosch |
| Function | Condenser, ignition |
| Extra Description | Kerr Nelson |
| Net weight | 0.024 kg |
Important compatibility info
| Weight | 0.03 kg |
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Ducellier |
| Type | Contact Breaker, distributor |
Important compatibility info
| Weight | 0.03 kg |
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Ducellier |
| Type | Contact Breaker, distributor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Denso |
| Weight | 0.03 kg |
| Type | Contact Breaker, distributor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Denso |
| Weight | 0.03 kg |
| Type | Contact Breaker, distributor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Denso |
| Additional Information 2 | with ventilation slots |
| Weight | 0.03 kg |
| Type | Contact Breaker, distributor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Contact Breaker, distributor |
| Manufacturer Restriction | Denso |
| Additional Information 2 | with ventilation slots |
| Weight | 0.03 kg |
| Type | Contact Breaker, distributor |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























