Important compatibility info
| Length 1 | 1385 mm |
| Number of Gears | for reverse gear |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Track rollers material | Metal |
| Paired article numbers | 179124 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Track rollers material | Metal |
| Paired article numbers | 179124 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M16 x 1,5 |
| Hole Spacing | 155.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M16 x 1,5 |
| Hole Spacing | 155.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without integrated air temperature sensor |
| Number of Poles | 3 -pin connector |
| Weight | 0.178 kg |
| Connector Shape | rectangular |
| Housing Type | with housing |
| Housing Diameter | 90 mm |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Siemens |
| Function | Mass Air Flow Sensor |
| Housing length | 79.5 mm |
| Net weight | 0.178 kg |
| Replaces | 19488 |
Important compatibility info
| Additional Information 2 | without integrated air temperature sensor |
| Number of Poles | 3 -pin connector |
| Weight | 0.178 kg |
| Connector Shape | rectangular |
| Housing Type | with housing |
| Housing Diameter | 90 mm |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Siemens |
| Function | Mass Air Flow Sensor |
| Housing length | 79.5 mm |
| Net weight | 0.178 kg |
| Replaces | 19488 |
Important compatibility info
Important compatibility info
| Connector Shape | Rectangular |
| Fitting Depth | 43 mm |
| Number of Poles | 2 -pin connector |
| Cable Length | 610 mm |
| Housing Colour | Black |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.044 kg |
| Weight | 0.068 kg |
| Angle | 0 ° |
| Spanner Size | 14 |
| Thread Size | M12 x 1.25 |
Important compatibility info
| Connector Shape | Rectangular |
| Fitting Depth | 43 mm |
| Number of Poles | 2 -pin connector |
| Cable Length | 610 mm |
| Housing Colour | Black |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.044 kg |
| Weight | 0.068 kg |
| Angle | 0 ° |
| Spanner Size | 14 |
| Thread Size | M12 x 1.25 |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type M4 |
| Ignition Coil | Connector Type DIN |
| Cable Length | 435 mm. 585 mm. 785 mm |
| Quantity | 7 |
| Length 1 | 755 mm |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.684 kg |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type M4 |
| Ignition Coil | Connector Type DIN |
| Cable Length | 435 mm. 585 mm. 785 mm |
| Quantity | 7 |
| Length 1 | 755 mm |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.684 kg |
Important compatibility info
| Height | 365 mm |
| Outer diameter | 247 mm |
| Inner diameter | 150 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Part number of recommended accessories | CF 1420 |
| Function | Air Filter |
| Extra Description | NLG Pico |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Height | 365 mm |
| Outer diameter | 247 mm |
| Inner diameter | 150 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Part number of recommended accessories | CF 1420 |
| Function | Air Filter |
| Extra Description | NLG Pico |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| for brake disc thickness | 22 mm |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| for brake disc thickness | 22 mm |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| for brake disc thickness | 22 mm |
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| for brake disc thickness | 22 mm |
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Type | Brake Caliper |
| Manufacturer Restriction | TRW |
| Material | Cast Iron |
| Paired article numbers | 2130189 |
| Function | Brake Caliper |
| Net weight | 3.33 kg |
| Placement on Vehicle | Front Axle Right, in front of axle |
| Piston Diameter | 57 mm |
| Brake Caliper Type | Floating Caliper, Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| for brake disc thickness | 26 mm |
| for brake disc diameter | 294 mm |
Important compatibility info
| Type | Brake Caliper |
| Manufacturer Restriction | TRW |
| Material | Cast Iron |
| Paired article numbers | 2130189 |
| Function | Brake Caliper |
| Net weight | 3.33 kg |
| Placement on Vehicle | Front Axle Right, in front of axle |
| Piston Diameter | 57 mm |
| Brake Caliper Type | Floating Caliper, Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| for brake disc thickness | 26 mm |
| for brake disc diameter | 294 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Br. Drum outer diameter | 260 mm |
| Inner Brake Drum Diameter | 64 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 130 mm |
| Function | Brake Drum |
| Total Br. Drum Height | 83 mm |
| Type | Brake Drum |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Br. Drum outer diameter | 260 mm |
| Inner Brake Drum Diameter | 64 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 130 mm |
| Function | Brake Drum |
| Total Br. Drum Height | 83 mm |
| Type | Brake Drum |
Important compatibility info
| Width | 82 mm |
| Function | Starter Battery |
| Battery Type Code | YB12A-B |
| Type | Starter Battery |
| Height | 162 mm |
| Length | 136 mm |
| Extra Description | POWERSPORTS Freshpack |
| Terminal Layout | Positive Front Left |
| Cold Cranking Amperage (CCA) | 160 A |
| Voltage | 12 V |
| Ampere-Hours | 12 Ah |
| Terminal Type | Y6 |
| Hold-down Type | B00 |
| Post Positions | 1 |
| Cold-test Current, EN | 160 A |
| Warranty | 1 year warranty |
Important compatibility info
| Width | 82 mm |
| Function | Starter Battery |
| Battery Type Code | YB12A-B |
| Type | Starter Battery |
| Height | 162 mm |
| Length | 136 mm |
| Extra Description | POWERSPORTS Freshpack |
| Terminal Layout | Positive Front Left |
| Cold Cranking Amperage (CCA) | 160 A |
| Voltage | 12 V |
| Ampere-Hours | 12 Ah |
| Terminal Type | Y6 |
| Hold-down Type | B00 |
| Post Positions | 1 |
| Cold-test Current, EN | 160 A |
| Warranty | 1 year warranty |
Important compatibility info
| Terminal Layout | Positive Front Left |
| Length | 136 mm |
| Cold-test Current, EN | 190 A |
| Extra Description | POWERSPORTS Freshpack |
| Function | Starter Battery |
| Type | Starter Battery |
| Ampere-Hours | 14 Ah |
| Voltage | 12 V |
| Width | 91 mm |
| Height | 168 mm |
| Post Positions | 1 |
| Cold Cranking Amperage (CCA) | 190 A |
| Battery Type Code | YB14-A2 |
| Terminal Type | Y8 |
| Hold-down Type | B00 |
| Warranty | 1 year warranty |
Important compatibility info
| Terminal Layout | Positive Front Left |
| Length | 136 mm |
| Cold-test Current, EN | 190 A |
| Extra Description | POWERSPORTS Freshpack |
| Function | Starter Battery |
| Type | Starter Battery |
| Ampere-Hours | 14 Ah |
| Voltage | 12 V |
| Width | 91 mm |
| Height | 168 mm |
| Post Positions | 1 |
| Cold Cranking Amperage (CCA) | 190 A |
| Battery Type Code | YB14-A2 |
| Terminal Type | Y8 |
| Hold-down Type | B00 |
| Warranty | 1 year warranty |
Important compatibility info
| Cold Cranking Amperage (CCA) | 190 A |
| Battery Type Code | YB14L-B2 |
| Length | 136 mm |
| Terminal Layout | Positive Front Right |
| Extra Description | POWERSPORTS Freshpack |
| Function | Starter Battery |
| Height | 168 mm |
| Width | 91 mm |
| Voltage | 12 V |
| Ampere-Hours | 14 Ah |
| Cold-test Current, EN | 190 A |
| Hold-down Type | B00 |
| Terminal Type | Y8 |
| Type | Starter Battery |
| Warranty | 1 year warranty |
Important compatibility info
| Cold Cranking Amperage (CCA) | 190 A |
| Battery Type Code | YB14L-B2 |
| Length | 136 mm |
| Terminal Layout | Positive Front Right |
| Extra Description | POWERSPORTS Freshpack |
| Function | Starter Battery |
| Height | 168 mm |
| Width | 91 mm |
| Voltage | 12 V |
| Ampere-Hours | 14 Ah |
| Cold-test Current, EN | 190 A |
| Hold-down Type | B00 |
| Terminal Type | Y8 |
| Type | Starter Battery |
| Warranty | 1 year warranty |
Important compatibility info
| Terminal Layout | Terminals on End, Positive Right |
| Length | 114 mm |
| Cold-test Current, EN | 30 A |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 30 A |
| Type | Starter Battery |
| Terminal Type | Y12 |
| Height | 86 mm |
| Width | 49 mm |
| Voltage | 12 V |
| Ampere-Hours | 2 Ah |
| Battery Type Code | YTR4A-BS |
| Extra Description | POWERSPORTS AGM |
| Post Positions | 4 |
| Hold-down Type | B00 |
| Replaced by | 502903003K544 |
| Warranty | 1 year warranty |
Additional Information
Technical Information
Designed for mounting at angles of up to 25 degrees, offering flexible installation options without compromising performance or safety.
Important compatibility info
| Terminal Layout | Terminals on End, Positive Right |
| Length | 114 mm |
| Cold-test Current, EN | 30 A |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 30 A |
| Type | Starter Battery |
| Terminal Type | Y12 |
| Height | 86 mm |
| Width | 49 mm |
| Voltage | 12 V |
| Ampere-Hours | 2 Ah |
| Battery Type Code | YTR4A-BS |
| Extra Description | POWERSPORTS AGM |
| Post Positions | 4 |
| Hold-down Type | B00 |
| Replaced by | 502903003K544 |
| Warranty | 1 year warranty |
Additional Information
Technical Information
Designed for mounting at angles of up to 25 degrees, offering flexible installation options without compromising performance or safety.
Important compatibility info
| Extra Description | Apec Blue |
| Rotor Style | Vented |
| Function | Brake Disc |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 20 mm |
| Outer diameter | 325 mm |
| Height | 59 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Extra Description | Apec Blue |
| Rotor Style | Vented |
| Function | Brake Disc |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 20 mm |
| Outer diameter | 325 mm |
| Height | 59 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22.4 mm |
| Brake Disc Thickness | 24 mm |
| Thickness | 45 mm |
| Outer diameter | 307 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22.4 mm |
| Brake Disc Thickness | 24 mm |
| Thickness | 45 mm |
| Outer diameter | 307 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 258 mm |
| Quantity Unit | Set |
| Brake Disc Thickness | 22 mm |
| Height | 43.9 mm |
| Number of Holes | 4 |
| Minimum thickness | 19.8 mm |
| Centering Diameter | 61 mm |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 258 mm |
| Quantity Unit | Set |
| Brake Disc Thickness | 22 mm |
| Height | 43.9 mm |
| Number of Holes | 4 |
| Minimum thickness | 19.8 mm |
| Centering Diameter | 61 mm |
| Function | Brake Disc |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Brake System | Brembo |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Homologated |
| Height 1 | 82.1 mm |
| Width 1 | 187.5 mm |
| Thickness/Strength 1 | 15.5 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Brake System | Brembo |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Homologated |
| Height 1 | 82.1 mm |
| Width 1 | 187.5 mm |
| Thickness/Strength 1 | 15.5 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Brake Master Cylinder |
| Number of Connectors / Ports | 5 |
| Thread Size | 10 x 1 |
| Brake System | Bendix |
| Type | Brake Master Cylinder |
| Bore Diameter | 25 mm |
Important compatibility info
| Function | Brake Master Cylinder |
| Number of Connectors / Ports | 5 |
| Thread Size | 10 x 1 |
| Brake System | Bendix |
| Type | Brake Master Cylinder |
| Bore Diameter | 25 mm |
Important compatibility info
| Type | Idle Control Valve, air supply |
| Operating Mode | Electric |
| Valve type | Auxiliary Air Valve |
| Number of Poles | 2 -pin connector |
| Function | Idle Control Valve, air supply |
Important compatibility info
| Type | Idle Control Valve, air supply |
| Operating Mode | Electric |
| Valve type | Auxiliary Air Valve |
| Number of Poles | 2 -pin connector |
| Function | Idle Control Valve, air supply |
Important compatibility info
| Placement on Vehicle | Rear Axle, Lower, Rear |
| Length | 638 mm |
| Height | 127 mm |
| Width | 190 mm |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Rear Axle, Lower, Rear |
| Length | 638 mm |
| Height | 127 mm |
| Width | 190 mm |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Metal |
| Additional Information | with gasket/seal |
| Housing material | Aluminium |
| Type | Water Pump, engine cooling |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Metal |
| Additional Information | with gasket/seal |
| Housing material | Aluminium |
| Type | Water Pump, engine cooling |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 180 W |
| for OE number | 77365525 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 180 W |
| for OE number | 77365525 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





















