Important compatibility info
| Placement on Vehicle | Right Front |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Outer diameter | 14 mm |
| Type | Mounting, engine |
| Length | 136 mm |
| Inner diameter | 11 mm |
Important compatibility info
| Length 2 | 621 mm |
| Length 1 | 937 mm |
| Number of Gears | for forwards gear |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 621 mm |
| Length 1 | 937 mm |
| Number of Gears | for forwards gear |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 588 mm |
| Number of Gears | for reverse gear |
| Length 1 | 878 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 588 mm |
| Number of Gears | for reverse gear |
| Length 1 | 878 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Overall Length | 508 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
| Number of circuits | 4 |
| Also available as universal article see part no. | 0258986602 |
Important compatibility info
| Overall Length | 508 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
| Number of circuits | 4 |
| Also available as universal article see part no. | 0258986602 |
Important compatibility info
| Type | Ignition Coil |
| Function | Ignition Coil |
Important compatibility info
| Type | Ignition Coil |
| Function | Ignition Coil |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Number of Poles | 3 -pin connector |
| Function | Ignition Coil |
| Type | Ignition Coil |
Important compatibility info
| Number of Poles | 3 -pin connector |
| Function | Ignition Coil |
| Type | Ignition Coil |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 627 mm |
| Transmission-side joint diameter | 68.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 627 mm |
| Transmission-side joint diameter | 68.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 14 mm |
| Inner diameter | 11 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Length | 136 mm |
| Placement on Vehicle | Right Front |
Important compatibility info
| Outer diameter | 14 mm |
| Inner diameter | 11 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Length | 136 mm |
| Placement on Vehicle | Right Front |
Important compatibility info
| Outer diameter | 211 mm |
| Number of Teeth | 28 |
| Function | Clutch Kit |
| Additional Information 2 | with release plate |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 211 mm |
| Number of Teeth | 28 |
| Function | Clutch Kit |
| Additional Information 2 | with release plate |
| Additional Information | with synthetic grease |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Includes fitting kit | FK90170B |
| To be used with part number(s) | FK90170 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023










