Important compatibility info
| Model | 205 |
| Length | 840 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 25 |
| Manufacturer | PEUGEOT |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Material | Aluminium |
| Manufacturer | CITROEN PEUGEOT |
| Model | 1007 207 208 C3 C3 Pluriel |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Brake System | TRW |
| Thread Size | 10x1 |
| Bore Diameter | 22 mm |
Important compatibility info
| Material | Aluminium |
| Manufacturer | CITROEN PEUGEOT |
| Model | 1007 207 208 C3 C3 Pluriel |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Brake System | TRW |
| Thread Size | 10x1 |
| Bore Diameter | 22 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | MA-01251 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| for OE number | 4851002M60 |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | MA-01251 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| for OE number | 4851002M60 |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Length | 130 mm |
| External Thread Size | M8 x 1 |
| Function | Glow Plug |
| Glow Plug Type | Pencil-type Glow Plug |
| Fitting Depth | 26 mm |
| Spanner Size | 8 |
| Voltage | 4.4 V |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 130 mm |
| External Thread Size | M8 x 1 |
| Function | Glow Plug |
| Glow Plug Type | Pencil-type Glow Plug |
| Fitting Depth | 26 mm |
| Spanner Size | 8 |
| Voltage | 4.4 V |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Delivery Quantity | 100 l/h |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Delivery Quantity | 100 l/h |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Paired article numbers | 334699 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Paired article numbers | 334699 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Important compatibility info
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70126B |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK70126 |
Important compatibility info
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70126B |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK70126 |
Important compatibility info
| Minimum thickness | 8 mm |
| Centering Diameter | 64 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | solid |
| Tightening Torque | 108 Nm |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Height | 49 mm |
| Outer diameter | 260 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
Important compatibility info
| Minimum thickness | 8 mm |
| Centering Diameter | 64 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | solid |
| Tightening Torque | 108 Nm |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Height | 49 mm |
| Outer diameter | 260 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5688XS)
- 1x Gates Tensioner Pulley, timing belt (T43265)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42307)
- 1x Gates Bolt and Nut Kit (SET62)
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5688XS)
- 1x Gates Tensioner Pulley, timing belt (T43265)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42307)
- 1x Gates Bolt and Nut Kit (SET62)
Important compatibility info
| Terminal Type | T1 |
| Function | Starter Battery |
| Ampere-Hours | 88 Ah |
| Battery Type Code | 017 |
| Warranty | 5 year warranty |
| Width | 175 mm |
| Type | Starter Battery |
| Voltage | 12 V |
| Hold-down Type | B13 |
| Cold-test Current, EN | 760 A |
| Title | NAPA High Power Battery 12V - 88Ah - 760A |
| Height | 175 mm |
| Extra Description | NAPA Battery |
| Length | 354 mm |
Additional Information
- OE Equivalent - Original quality spare part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom they are supplied.
- Heavy Duty Performance - Ensures a high standard of performance from the battery to meet the users requirements.
- Diesel Approved - The standard range is approved for all diesel vehicles.
- Long Life - Specifically designed with Calcium/Calcium technology to extend the life of the battery.
Important compatibility info
| Terminal Type | T1 |
| Function | Starter Battery |
| Ampere-Hours | 88 Ah |
| Battery Type Code | 017 |
| Warranty | 5 year warranty |
| Width | 175 mm |
| Type | Starter Battery |
| Voltage | 12 V |
| Hold-down Type | B13 |
| Cold-test Current, EN | 760 A |
| Title | NAPA High Power Battery 12V - 88Ah - 760A |
| Height | 175 mm |
| Extra Description | NAPA Battery |
| Length | 354 mm |
Additional Information
- OE Equivalent - Original quality spare part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom they are supplied.
- Heavy Duty Performance - Ensures a high standard of performance from the battery to meet the users requirements.
- Diesel Approved - The standard range is approved for all diesel vehicles.
- Long Life - Specifically designed with Calcium/Calcium technology to extend the life of the battery.
Important compatibility info
| Function | Water Pump, engine cooling |
| Housing Type | without housing |
| Type | Water Pump, engine cooling |
| for OE number | 04C121600K |
| Number of Teeth | 28 |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 50 mm |
Important compatibility info
| Function | Water Pump, engine cooling |
| Housing Type | without housing |
| Type | Water Pump, engine cooling |
| for OE number | 04C121600K |
| Number of Teeth | 28 |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 50 mm |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| for OE number | 2510003011 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| for OE number | 2510003011 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 100 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | with ABS sensor ring |
| Thread Size | M12x1,5 |
| Mounting bores distance | 114.3 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Net weight | 3.69 kg |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 100 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | with ABS sensor ring |
| Thread Size | M12x1,5 |
| Mounting bores distance | 114.3 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Net weight | 3.69 kg |
Important compatibility info
| Additional Information 2 | with seal ring |
| Material | Aluminium |
| Function | Condenser, air conditioning |
| Outlet Diameter | 11.8 mm |
| Inlet Diameter | 11.8 mm |
| Core Length | 620 mm |
| Core Width | 372 mm |
| Core Depth | 16 mm |
| Extra Description | EASY FIT |
| Type | Condenser, air conditioning |
Important compatibility info
| Additional Information 2 | with seal ring |
| Material | Aluminium |
| Function | Condenser, air conditioning |
| Outlet Diameter | 11.8 mm |
| Inlet Diameter | 11.8 mm |
| Core Length | 620 mm |
| Core Width | 372 mm |
| Core Depth | 16 mm |
| Extra Description | EASY FIT |
| Type | Condenser, air conditioning |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Length | 364 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 113 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 364 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 113 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Water pump impeller material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Water pump impeller material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 0.778 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Technical Information Number | Right |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | with gaskets/seals |
| Weight | 0.860 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.778 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Technical Information Number | Right |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | with gaskets/seals |
| Weight | 0.860 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.738 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Technical Information Number | Left |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | with gaskets/seals |
| Weight | 1.012 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.738 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Technical Information Number | Left |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | with gaskets/seals |
| Weight | 1.012 kg |
| Type | EGR Valve |
Important compatibility info
| Terminal Layout | Positive Front Right |
| Battery Type Code | YTX20HL-BS |
| Length | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 18.9 A |
| Terminal Type | Bike Box Terminal |
| Type | Gel |
| Cold Cranking Amperage (CCA) | 310 A |
| Width | 87 mm |
| Height | 155 mm |
| Warranty | 1 year warranty |
Important compatibility info
| Terminal Layout | Positive Front Right |
| Battery Type Code | YTX20HL-BS |
| Length | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 18.9 A |
| Terminal Type | Bike Box Terminal |
| Type | Gel |
| Cold Cranking Amperage (CCA) | 310 A |
| Width | 87 mm |
| Height | 155 mm |
| Warranty | 1 year warranty |
Important compatibility info
| Function | Charge Air Hose |
| Colour | Orange |
| Material | Silicone |
| Hose Length | 290 mm |
| Inner diameter 2 | 37 mm |
| Inner diameter 1 | 37 mm |
| Type | Charge Air Hose |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























