Important compatibility info
| Function | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Type | Belt Pulley, crankshaft |
| Width | 41 mm |
| Outer diameter | 147 mm |
| Inner diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Internal Thread Size | M6 x 1 |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Placement on Vehicle | Front Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Material | Steel |
| Paired article numbers | ADN186149 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 18.5 mm |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Internal Thread Size | M6 x 1 |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Placement on Vehicle | Front Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Material | Steel |
| Paired article numbers | ADN186149 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 18.5 mm |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Paired article numbers | ADN186146 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18.5 mm |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Paired article numbers | ADN186146 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18.5 mm |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| To be used with part number(s) | FK90805 |
| Placement on Vehicle | Right |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Includes fitting kit | FK90805B |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| To be used with part number(s) | FK90805 |
| Placement on Vehicle | Right |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Includes fitting kit | FK90805B |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91007 |
| Product met | Euro 4 |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91007 |
| Product met | Euro 4 |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91159 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91159 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Weight | 1.98 kg |
| Placement on Vehicle | Right |
| Replaces | 80000527; 80000586 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Important compatibility info
| Weight | 1.98 kg |
| Placement on Vehicle | Right |
| Replaces | 80000527; 80000586 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Important compatibility info
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
| Placement on Vehicle | Front |
Additional Information
Important compatibility info
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
| Placement on Vehicle | Front |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 41 mm |
| Outer diameter | 147 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Inner diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 41 mm |
| Outer diameter | 147 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Inner diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Combi Switch Function | with indicator function, with high beam function, with park light function |
| Colour | Black |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Combi Switch Function | with indicator function, with high beam function, with park light function |
| Colour | Black |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Centering Diameter | 59 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 284 mm |
| Height | 43 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCK1050, JCP193, NKR0117 |
| Weight | 6.44 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Centering Diameter | 59 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 284 mm |
| Height | 43 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCK1050, JCP193, NKR0117 |
| Weight | 6.44 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Diameter 2 | 94 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission Type | 5-Speed Manual Transmission |
| External Teeth, Wheel Side | 36 |
| Length | 501 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Diameter 2 | 94 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission Type | 5-Speed Manual Transmission |
| External Teeth, Wheel Side | 36 |
| Length | 501 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (26686)
- 1x Febi Air Filter (27030)
- 6x Febi Spark Plug (13518)
- 1x Febi Fuel filter (12650)
- 1x Febi Screw Plug, oil sump (06564)
- 1x Febi Filter Set, cabin air (12264)
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (26686)
- 1x Febi Air Filter (27030)
- 6x Febi Spark Plug (13518)
- 1x Febi Fuel filter (12650)
- 1x Febi Screw Plug, oil sump (06564)
- 1x Febi Filter Set, cabin air (12264)
Important compatibility info
| Length | 910 mm |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 370 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 910 mm |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 370 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | Front Axle Left, in front of axle |
| Material | Cast Iron |
| Brake Disc Type | Vented |
| Brake Caliper Type | Floating Caliper, Brake Caliper (2 pistons) |
| Paired article numbers | 211970 |
| for brake disc thickness | 24 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Manufacturer Restriction | LUCAS |
| Function | Brake Caliper |
| Net weight | 5.02 kg |
| Piston Diameter | 45 mm. 48 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, in front of axle |
| Material | Cast Iron |
| Brake Disc Type | Vented |
| Brake Caliper Type | Floating Caliper, Brake Caliper (2 pistons) |
| Paired article numbers | 211970 |
| for brake disc thickness | 24 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Manufacturer Restriction | LUCAS |
| Function | Brake Caliper |
| Net weight | 5.02 kg |
| Piston Diameter | 45 mm. 48 mm |
Important compatibility info
| Type | Auxiliary Stop Light |
| Function | Auxiliary Stop Light |
| Bulb Type | LED |
| Placement on Vehicle | Rear |
Important compatibility info
| Type | Auxiliary Stop Light |
| Function | Auxiliary Stop Light |
| Bulb Type | LED |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front, Front Axle Right |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3125 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front, Front Axle Right |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3125 |
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Paired article numbers | MA-22051 |
| Placement on Vehicle | Front Axle Right |
| for OE number | 4851029095 |
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Paired article numbers | MA-22051 |
| Placement on Vehicle | Front Axle Right |
| for OE number | 4851029095 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 298 mm |
| Brake Disc Thickness | 10 mm |
| Height | 61 mm |
| Minimum thickness | 8.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Rotor Style | Solid |
| Number of Holes | 5 |
| Outer diameter | 298 mm |
| Brake Disc Thickness | 10 mm |
| Height | 61 mm |
| Minimum thickness | 8.4 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 6 |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 122.5 mm |
| Minimum thickness | 15.0 mm |
| Brake Disc Thickness | 18 mm |
| Outer diameter | 308 mm |
| Height | 22 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Solid |
| Number of Holes | 6 |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 122.5 mm |
| Minimum thickness | 15.0 mm |
| Brake Disc Thickness | 18 mm |
| Outer diameter | 308 mm |
| Height | 22 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Height | 44.3 mm |
| Outer diameter | 273 mm |
| Brake Disc Thickness | 10 mm |
| Number of Holes | 5 |
| Minimum thickness | 8.5 mm |
| Centering Diameter | 55 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 2 |
Important compatibility info
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Height | 44.3 mm |
| Outer diameter | 273 mm |
| Brake Disc Thickness | 10 mm |
| Number of Holes | 5 |
| Minimum thickness | 8.5 mm |
| Centering Diameter | 55 mm |
| Quantity Unit | Set |
| Function | Brake Disc |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 2 |
Important compatibility info
| Current Strength | 30 A |
| Combi Switch Function | Normally Open Contact |
| Replaces | 0332014112 |
| Housing Colour | Black |
| Temperature range to | 100 °C |
| Temperature range from | -40 °C |
| Relay function | Normally open contact |
| Resistance | 90 Ohm |
| Number of Poles | 5 -pin connector |
| Additional Information | with suppression diode |
| Housing Type | Synthetic Material Housing |
| Voltage | 12 V |
| Type | Multifunctional Relay |
| Function | Multifunctional Relay |
Important compatibility info
| Current Strength | 30 A |
| Combi Switch Function | Normally Open Contact |
| Replaces | 0332014112 |
| Housing Colour | Black |
| Temperature range to | 100 °C |
| Temperature range from | -40 °C |
| Relay function | Normally open contact |
| Resistance | 90 Ohm |
| Number of Poles | 5 -pin connector |
| Additional Information | with suppression diode |
| Housing Type | Synthetic Material Housing |
| Voltage | 12 V |
| Type | Multifunctional Relay |
| Function | Multifunctional Relay |
Important compatibility info
| Combi Switch Function | Normally Open Contact |
| Current Strength | 30 A |
| Function | Multifunctional Relay |
| Temperature range to | 100 °C |
| Temperature range from | -40 °C |
| Relay function | Normally open contact |
| Resistance | 90 Ohm |
| Voltage | 12 V |
| Additional Information | with holder |
| Number of Poles | 5 -pin connector |
| Housing Type | Synthetic Material Housing |
| Housing Colour | Black |
| Type | Multifunctional Relay |
| Replaces | 0332014125 |
Important compatibility info
| Combi Switch Function | Normally Open Contact |
| Current Strength | 30 A |
| Function | Multifunctional Relay |
| Temperature range to | 100 °C |
| Temperature range from | -40 °C |
| Relay function | Normally open contact |
| Resistance | 90 Ohm |
| Voltage | 12 V |
| Additional Information | with holder |
| Number of Poles | 5 -pin connector |
| Housing Type | Synthetic Material Housing |
| Housing Colour | Black |
| Type | Multifunctional Relay |
| Replaces | 0332014125 |
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Extra Description | Cambiare |
| Type | Sensor, exhaust gas temperature |
| for OE number | 1681281 |
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Extra Description | Cambiare |
| Type | Sensor, exhaust gas temperature |
| for OE number | 1681281 |
Important compatibility info
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 646 010 14 62 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























