Important compatibility info
| Placement on Vehicle | Left Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 1 | 1677 mm |
| Length 2 | 1403 mm |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Overall Length | 432 mm |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Overall Length | 432 mm |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 140 |
| Timing Chain Size | Z53 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 140 |
| Timing Chain Size | Z53 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 276 mm |
| Min. Length | 237 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 276 mm |
| Min. Length | 237 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length 1 | 1677 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Length 2 | 1403 mm |
Important compatibility info
| Length 1 | 1677 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Length 2 | 1403 mm |
Important compatibility info
Important compatibility info
Important compatibility info
| Component Number | GS426LC |
| Engine Bearing Type | Connecting Rod Bearing |
| Function | Connecting Rod Bearing |
| Type | Connecting Rod Bearing |
| Width | 24.38 mm |
| Thickness | 1.830 mm |
| Additional Information 2 | Bronze coated steel back |
| for shaft diamater from | 52.974 mm |
| to shaft diameter | 52.987 mm |
| for housing diameter from | 56.718 mm |
| to housing diameter | 56.731 mm |
Additional Information
- 6x Glyco Bearing (GS426LC)
Important compatibility info
| Component Number | GS426LC |
| Engine Bearing Type | Connecting Rod Bearing |
| Function | Connecting Rod Bearing |
| Type | Connecting Rod Bearing |
| Width | 24.38 mm |
| Thickness | 1.830 mm |
| Additional Information 2 | Bronze coated steel back |
| for shaft diamater from | 52.974 mm |
| to shaft diameter | 52.987 mm |
| for housing diameter from | 56.718 mm |
| to housing diameter | 56.731 mm |
Additional Information
- 6x Glyco Bearing (GS426LC)
Important compatibility info
| Extra Description | EASY FIT |
| Material | Aluminium |
| Core Depth | 17 mm |
| Additional Information 2 | with mounting parts |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Width | 455 mm |
| Core Length | 600 mm |
Important compatibility info
| Extra Description | EASY FIT |
| Material | Aluminium |
| Core Depth | 17 mm |
| Additional Information 2 | with mounting parts |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Width | 455 mm |
| Core Length | 600 mm |
Important compatibility info
| Diameter | 220 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 220 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 44 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 44 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 44 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 44 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Tightening Torque | 85 Nm |
| Height | 44 mm |
| Outer diameter | 258 mm |
| Brake Disc Thickness | 23 mm |
| Number of Holes | 4 |
| Minimum thickness | 21 mm |
| Centering Diameter | 64 mm |
| Rotor Style | internally vented |
| Extra Description | PRIME LINE - UV Coated |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Tightening Torque | 85 Nm |
| Height | 44 mm |
| Outer diameter | 258 mm |
| Brake Disc Thickness | 23 mm |
| Number of Holes | 4 |
| Minimum thickness | 21 mm |
| Centering Diameter | 64 mm |
| Rotor Style | internally vented |
| Extra Description | PRIME LINE - UV Coated |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Connector Shape | Round |
| Cable Length | 660 mm |
| Lambda Sensor | Diagnostic Probe |
| Type | Oxygen Sensor |
| Number of Poles | 4 -pin connector |
| Function | Oxygen Sensor |
Important compatibility info
| Connector Shape | Round |
| Cable Length | 660 mm |
| Lambda Sensor | Diagnostic Probe |
| Type | Oxygen Sensor |
| Number of Poles | 4 -pin connector |
| Function | Oxygen Sensor |
Important compatibility info
| Number of Poles | 5 -pin connector |
| for OE number | 28164-2F000 |
| Housing Type | with housing |
| Type | Air Mass Sensor |
| Function | Air Mass Sensor |
| Extra Description | Fuel Parts |
| Connector Shape | Oval |
Important compatibility info
| Number of Poles | 5 -pin connector |
| for OE number | 28164-2F000 |
| Housing Type | with housing |
| Type | Air Mass Sensor |
| Function | Air Mass Sensor |
| Extra Description | Fuel Parts |
| Connector Shape | Oval |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 19 |
| Seal Diameter | 44 mm |
| External Teeth, Wheel Side | 23 |
| Outer diameter | 69 mm |
| Length | 143 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Thread Size | M18 x 1,5 |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 19 |
| Seal Diameter | 44 mm |
| External Teeth, Wheel Side | 23 |
| Outer diameter | 69 mm |
| Length | 143 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Thread Size | M18 x 1,5 |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| To be used with part number(s) | FK51198 |
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| To be used with part number(s) | FK51198 |
Important compatibility info
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70142B |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK70142 |
Important compatibility info
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70142B |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK70142 |
Important compatibility info
| Includes fitting kit | FK90397B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90397 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Includes fitting kit | FK90397B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90397 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| To be used with part number(s) | FK90893 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| To be used with part number(s) | FK90893 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 5 |
| Number of Ribs | 5 |
| Impeller Diameter | 64.8 mm |
| Water Pump Pulley Diameter | 92 mm |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of Wings | 5 |
| Number of Ribs | 5 |
| Impeller Diameter | 64.8 mm |
| Water Pump Pulley Diameter | 92 mm |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Weight | 0.708 kg |
| Net weight | 0.630 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Type | EGR Valve |
Important compatibility info
| Weight | 0.708 kg |
| Net weight | 0.630 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Type | EGR Valve |
Important compatibility info
| Connector Shape | rectangular |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Net weight | 0.114 kg |
| Lambda Sensor | Regulating Sensor |
| Cable Length | 940 mm |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.136 kg |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Connector Shape | rectangular |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Net weight | 0.114 kg |
| Lambda Sensor | Regulating Sensor |
| Cable Length | 940 mm |
| Housing Colour | Black |
| Number of Poles | 4 -pin connector |
| Weight | 0.136 kg |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Net weight | 7 kg |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 68.9 mm |
| Function | Brake Disc |
| Surface | Coated |
| Outer diameter | 290 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.4 mm |
| Height | 46.3 mm |
| Placement on Vehicle | Front Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























