Important compatibility info
| for OE number | 7H0965561 |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| Number of Teeth | 20 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 22,4 |
| Friction Lining Outer Diameter | 215 mm |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
| Replaces | QKT710AF; QKT2150AF; QKT2249AF; QKT2333AF |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT305)
Important compatibility info
| Number of Teeth | 20 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 22,4 |
| Friction Lining Outer Diameter | 215 mm |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
| Replaces | QKT710AF; QKT2150AF; QKT2249AF; QKT2333AF |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT305)
Important compatibility info
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2641S |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2641S |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| for OE number | 1336CC |
| Function | Thermostat, coolant |
| Opening Temperature | 105 °C |
| Housing Type | Synthetic Material Housing |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Manufacturer | CITROEN PEUGEOT |
| Additionally Required Parts | ATH1007 |
Important compatibility info
| for OE number | 1336CC |
| Function | Thermostat, coolant |
| Opening Temperature | 105 °C |
| Housing Type | Synthetic Material Housing |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Manufacturer | CITROEN PEUGEOT |
| Additionally Required Parts | ATH1007 |
Important compatibility info
| Opening Temperature | 92 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Aluminium |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Opening Temperature | 92 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Aluminium |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 433 mm |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8078 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 433 mm |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8078 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Bearing Code | Gen 3 |
| Thread Size | M12X1,5 |
| Number of Teeth, ABS ring | 84 |
| Type | Wheel Bearing Kit |
| Outer diameter | 139.3 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 2 | 70 mm |
| Width 1 | 82 mm |
| Additional Information 2 | with integrated ABS sensor |
| Function | Wheel Bearing Kit |
Important compatibility info
| Bearing Code | Gen 3 |
| Thread Size | M12X1,5 |
| Number of Teeth, ABS ring | 84 |
| Type | Wheel Bearing Kit |
| Outer diameter | 139.3 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 2 | 70 mm |
| Width 1 | 82 mm |
| Additional Information 2 | with integrated ABS sensor |
| Function | Wheel Bearing Kit |
Important compatibility info
| Spanner Size | 17 |
| Cable Length | 385 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 17 |
| Cable Length | 385 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with adapter |
| Type | Interior Blower |
| Function | Interior Blower |
| Extra Description | EASY FIT |
Important compatibility info
| Additional Information 2 | with adapter |
| Type | Interior Blower |
| Function | Interior Blower |
| Extra Description | EASY FIT |
Important compatibility info
| Net weight | 0.024 kg |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Function | Injector Nozzle |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
Important compatibility info
| Net weight | 0.024 kg |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Function | Injector Nozzle |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
Important compatibility info
| Net weight | 0.036 kg |
| Extra Description | Kerr Nelson |
| Function | Nozzle and Holder Assembly |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.036 kg |
| Extra Description | Kerr Nelson |
| Function | Nozzle and Holder Assembly |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.036 kg |
| Function | Injector Nozzle |
| Connector Shape | Oval |
| Housing Colour | Black |
| Colour | Blue |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
Important compatibility info
| Net weight | 0.036 kg |
| Function | Injector Nozzle |
| Connector Shape | Oval |
| Housing Colour | Black |
| Colour | Blue |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
Important compatibility info
| Brake Disc Thickness | 16 mm |
| Function | Brake Disc |
| Outer diameter | 292 mm |
| Thickness | 47 mm |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 16 mm |
| Function | Brake Disc |
| Outer diameter | 292 mm |
| Thickness | 47 mm |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Type | Brake Drum |
| Max.skimmed drum measure | 230.2 mm |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
| Function | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Thickness | 64 mm |
| Inner diameter | 227 mm |
| Outer diameter | 250 mm |
| Width | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Type | Brake Drum |
| Max.skimmed drum measure | 230.2 mm |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
| Function | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Thickness | 64 mm |
| Inner diameter | 227 mm |
| Outer diameter | 250 mm |
| Width | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 132 mm |
| Width | 77 mm |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 132 mm |
| Width | 77 mm |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Includes fitting kit | FK80008B |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK80008 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK80008B |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK80008 |
| Material | Ceramic |
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90697 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90697 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 365 mm |
| Brake Disc Thickness | 36 mm |
| Height | 62.5 mm |
| Minimum thickness | 34 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Surface | Coated |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of Holes | 5 |
| Outer diameter | 365 mm |
| Brake Disc Thickness | 36 mm |
| Height | 62.5 mm |
| Minimum thickness | 34 mm |
| Centering Diameter | 75 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Length 1 | 1675 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1540 mm |
| Length 4 | 1202 mm |
| Type | Cable Pull, manual transmission |
| Length 2 | 1420 mm |
Important compatibility info
| Length 1 | 1675 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1540 mm |
| Length 4 | 1202 mm |
| Type | Cable Pull, manual transmission |
| Length 2 | 1420 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1160 mm |
| Length 4 | 879 mm |
| Length 3 | 1202 mm |
| Length 2 | 855 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1160 mm |
| Length 4 | 879 mm |
| Length 3 | 1202 mm |
| Length 2 | 855 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 1230 mm |
| Length 3 | 1477 mm |
| Length 4 | 1136 mm |
| Length 1 | 1494 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 1230 mm |
| Length 3 | 1477 mm |
| Length 4 | 1136 mm |
| Length 1 | 1494 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 2 | 1165 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 887 mm |
| Length 3 | 940 mm |
| Length 4 | 1237 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 2 | 1165 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 887 mm |
| Length 3 | 940 mm |
| Length 4 | 1237 mm |
Important compatibility info
| Length 1 | 925 mm |
| Length 2 | 1090 mm |
| Length 3 | 1215 mm |
| Length 4 | 1399 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 925 mm |
| Length 2 | 1090 mm |
| Length 3 | 1215 mm |
| Length 4 | 1399 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Function | Centre Rod Assembly |
| Thread Measurement 2 | M30X1.5 |
| Length | 572 mm |
| Thread Measurement 1 | M20X1.5 |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Height | 63 mm |
| Outer diameter | 286 mm |
| Minimum thickness | 8.5 mm |
| Rotor Style | solid |
| Number of Holes | 5 |
| Brake Disc Thickness | 10 mm |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Surface | Coated |
| Centering Diameter | 58 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























