Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 79 mm |
| Width | 175 mm |
| Additional Information | with accessories |
| Thickness | 19 mm |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate |
| Brake System | ATE |
| Wear Warning Contact | excl. wear warning contact |
| WVA Number | 22485, 22486 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Extra Description | PRIME LINE |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 79 mm |
| Width | 175 mm |
| Additional Information | with accessories |
| Thickness | 19 mm |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate |
| Brake System | ATE |
| Wear Warning Contact | excl. wear warning contact |
| WVA Number | 22485, 22486 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Extra Description | PRIME LINE |
Important compatibility info
| Type | Sender Unit, fuel tank |
| Extra Description | Cambiare |
| Function | Sender Unit, fuel tank |
| Pressure | 4 bar |
Important compatibility info
| Type | Sender Unit, fuel tank |
| Extra Description | Cambiare |
| Function | Sender Unit, fuel tank |
| Pressure | 4 bar |
Important compatibility info
| Length 1 | 815 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Replaced by | FKG1046 |
Important compatibility info
| Length 1 | 815 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Replaced by | FKG1046 |
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Part number of the recommended special tools | STT-1 |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5541XS)
- 1x Gates Tensioner Pulley, timing belt (T43116)
- 1x Gates Water Pump, engine cooling (WP0145)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Part number of the recommended special tools | STT-1 |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5541XS)
- 1x Gates Tensioner Pulley, timing belt (T43116)
- 1x Gates Water Pump, engine cooling (WP0145)
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 16.6 mm |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 18 mm |
| Brake Disc Thickness | 20 mm |
| Outer diameter | 330 mm |
| Height | 71 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCA1703L, JCA1703R, JCP8028, JCW307, NKF8343 |
| Weight | 8.1 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 16.6 mm |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 18 mm |
| Brake Disc Thickness | 20 mm |
| Outer diameter | 330 mm |
| Height | 71 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCA1703L, JCA1703R, JCP8028, JCW307, NKF8343 |
| Weight | 8.1 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 15 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Outer diameter | 295 mm |
| Rotor Style | Vented |
| Paired article numbers | JCA1298L, JCA1298R, JCP8131, JCP8135, JCW183, NKR0186 |
| Surface | Coated |
| Weight | 7.5 kg |
| Height | 51 mm |
| Brake Disc Thickness | 28 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 15 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Outer diameter | 295 mm |
| Rotor Style | Vented |
| Paired article numbers | JCA1298L, JCA1298R, JCP8131, JCP8135, JCW183, NKR0186 |
| Surface | Coated |
| Weight | 7.5 kg |
| Height | 51 mm |
| Brake Disc Thickness | 28 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Extra Description | PROformer |
| Outer diameter | 92 mm |
| Inner diameter | 54 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Extra Description | PROformer |
| Outer diameter | 92 mm |
| Inner diameter | 54 mm |
Important compatibility info
| Inner width | 57 mm |
| Placement on Vehicle | Rear Axle Left |
| for brake disc thickness | 12 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Solid |
| Brake System | ATE |
| Function | Brake Caliper |
| Piston Diameter | 38 mm |
| Type | Brake Caliper |
Important compatibility info
| Inner width | 57 mm |
| Placement on Vehicle | Rear Axle Left |
| for brake disc thickness | 12 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Solid |
| Brake System | ATE |
| Function | Brake Caliper |
| Piston Diameter | 38 mm |
| Type | Brake Caliper |
Important compatibility info
| Outer diameter | 62 mm |
| Width | 38 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 62 mm |
| Width | 38 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 19C3218 |
| Tensile Cord Material | Aramid |
| Width | 30 mm |
| Thickness | 14.4 mm |
| Colour | Black |
| Quality | OE Exact |
| Outer Length | 848 mm |
| Function | CVT Drive Belt |
| Angle | 28 ° |
| Extra Description | G-Force WorkHorse™ |
| Type | CVT Drive Belt |
| Belt Material | Rubber |
Important compatibility info
| Replaces | 19C3218 |
| Tensile Cord Material | Aramid |
| Width | 30 mm |
| Thickness | 14.4 mm |
| Colour | Black |
| Quality | OE Exact |
| Outer Length | 848 mm |
| Function | CVT Drive Belt |
| Angle | 28 ° |
| Extra Description | G-Force WorkHorse™ |
| Type | CVT Drive Belt |
| Belt Material | Rubber |
Important compatibility info
| Function | Alternator Freewheel Clutch |
| for manufacturer number | 920680, 920679 |
| Additional Information 2 | Requires special tools for mounting |
| Number of grooves | 6 |
| Distance to first groove | 14.6 mm |
| Type | Alternator Freewheel Clutch |
Important compatibility info
| Function | Alternator Freewheel Clutch |
| for manufacturer number | 920680, 920679 |
| Additional Information 2 | Requires special tools for mounting |
| Number of grooves | 6 |
| Distance to first groove | 14.6 mm |
| Type | Alternator Freewheel Clutch |
Important compatibility info
| Net weight | 1.382 kg |
| Extra Description | Kerr Nelson |
| Function | Ignition Coil |
| Resistance | 13.05 kOhm |
| Ignition Coil | Connector Type DIN |
| Resistance | 1.1 Ohm |
| Connector Shape | Rectangular |
| Number of Inlets / Outlets | 6 |
| Number of Poles | 4 -pin connector |
| Voltage | 12 V |
| Additional Information 2 | with bracket |
| Weight | 1.535 kg |
| Type | Ignition Coil |
Important compatibility info
| Net weight | 1.382 kg |
| Extra Description | Kerr Nelson |
| Function | Ignition Coil |
| Resistance | 13.05 kOhm |
| Ignition Coil | Connector Type DIN |
| Resistance | 1.1 Ohm |
| Connector Shape | Rectangular |
| Number of Inlets / Outlets | 6 |
| Number of Poles | 4 -pin connector |
| Voltage | 12 V |
| Additional Information 2 | with bracket |
| Weight | 1.535 kg |
| Type | Ignition Coil |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Paired article numbers | 339789 |
| Placement on Vehicle | Front Axle Right |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Paired article numbers | 339789 |
| Placement on Vehicle | Front Axle Right |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 33.88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 33.88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length 2 | 743 mm |
| Length 3 | 1020 mm |
| Length 4 | 760 mm |
| Length 1 | 1016 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 743 mm |
| Length 3 | 1020 mm |
| Length 4 | 760 mm |
| Length 1 | 1016 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | Discs: 61 mm |
| Width | Pads: 194 mm |
| Outer diameter | Discs: 302 mm |
| Thickness | Pads: 16 mm |
| Additional Information 2 | Pads: with bolts |
| Brake Disc Thickness | Discs: 32 mm |
| Number of Holes | Discs: 6 |
| Brake System | Pads: Wagner |
| Wear Warning Contact | Pads: with acoustic wear warning |
| Bolt Hole Circle Diameter | Discs: 140 mm |
| Centering Diameter | Discs: 98 mm |
| Height 1 | Pads: 68 mm |
| Number of wear indicators | Pads: 2 Per Axle |
| Manufacturer | FORD |
| Model | RANGER |
| Rotor Style | Discs: Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | Discs: 61 mm |
| Width | Pads: 194 mm |
| Outer diameter | Discs: 302 mm |
| Thickness | Pads: 16 mm |
| Additional Information 2 | Pads: with bolts |
| Brake Disc Thickness | Discs: 32 mm |
| Number of Holes | Discs: 6 |
| Brake System | Pads: Wagner |
| Wear Warning Contact | Pads: with acoustic wear warning |
| Bolt Hole Circle Diameter | Discs: 140 mm |
| Centering Diameter | Discs: 98 mm |
| Height 1 | Pads: 68 mm |
| Number of wear indicators | Pads: 2 Per Axle |
| Manufacturer | FORD |
| Model | RANGER |
| Rotor Style | Discs: Vented |
Important compatibility info
| Minimum thickness | 29.4 mm |
| Rotor Style | Vented |
| Height | 54.7 mm |
| Brake Disc Thickness | 32.2 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Outer diameter | 330 mm |
| Type | Brake Disc Rotor |
| Centering Diameter | 67 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 112 mm |
Important compatibility info
| Minimum thickness | 29.4 mm |
| Rotor Style | Vented |
| Height | 54.7 mm |
| Brake Disc Thickness | 32.2 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Outer diameter | 330 mm |
| Type | Brake Disc Rotor |
| Centering Diameter | 67 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 112 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | ALFA ROMEO |
| Model | GIULIA |
| Paired article numbers | AST2864 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | ALFA ROMEO |
| Model | GIULIA |
| Paired article numbers | AST2864 |
Important compatibility info
| Includes fitting kit | FK50561B |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK50561 |
| Placement on Vehicle | Centre |
| Function | Exhaust Pipe |
Important compatibility info
| Includes fitting kit | FK50561B |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK50561 |
| Placement on Vehicle | Centre |
| Function | Exhaust Pipe |
Important compatibility info
| Placement on Vehicle | Front |
| Function | Catalytic Converter |
| Includes fitting kit | FK91155B |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91155 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Front |
| Function | Catalytic Converter |
| Includes fitting kit | FK91155B |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91155 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91214B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91214 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Includes fitting kit | FK91214B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91214 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Hub Profile | 22.1 x 19.1 |
| Number of Parts | 3 -part |
| Outer diameter | 172 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Hub Profile | 22.1 x 19.1 |
| Number of Parts | 3 -part |
| Outer diameter | 172 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 21.9 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Type | Clutch Kit |
Important compatibility info
| Number of Ribs | 6 |
| Inner diameter | 33 mm |
| Outer diameter | 155 mm |
| Thickness | 41.45 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Inner diameter | 33 mm |
| Outer diameter | 155 mm |
| Thickness | 41.45 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























