Important compatibility info
| Length | 450 mm |
| Height | 57 mm |
| Width | 89 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 268 mm |
| Height | 67 mm |
| Width | 118 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 268 mm |
| Height | 67 mm |
| Width | 118 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 200 mm |
| Height | 45 mm |
| Width | 168 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 200 mm |
| Height | 45 mm |
| Width | 168 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Paired article numbers | BFC1035 |
| Length | 278 mm |
| Height | 30 mm |
| Width | 219 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Important compatibility info
| Paired article numbers | BFC1035 |
| Length | 278 mm |
| Height | 30 mm |
| Width | 219 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Important compatibility info
| Function | Filter, cabin air |
| Width | 202 mm |
| Height | 31 mm |
| Length | 252 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Function | Filter, cabin air |
| Width | 202 mm |
| Height | 31 mm |
| Length | 252 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Height | 165 mm |
| Filter type | In-Line Filter |
| Inlet Diameter | 8 mm |
| Outlet Diameter | 8 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Outer diameter | 75 mm |
Important compatibility info
| Height | 165 mm |
| Filter type | In-Line Filter |
| Inlet Diameter | 8 mm |
| Outlet Diameter | 8 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Outer diameter | 75 mm |
Important compatibility info
| Thread Measurement 1 | 1/2"x20 |
| Thread Type | with right-hand thread, UNF Thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Thread Measurement 1 | 1/2"x20 |
| Thread Type | with right-hand thread, UNF Thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Required quantity | 1 |
| Length | 790 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Required quantity | 1 |
| Length | 790 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 850 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 850 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Extra Description | Rear |
| Function | Wiper Blade |
| Length 1 | 380 mm |
| Wiper blade type | Bracket wiper blade |
| Placement on Vehicle | Rear |
| Type | Wiper Blade |
| Title | Bosch Super Plus Conventional Blade Rear 400mm |
Additional Information
- Superb windscreen cleaning thanks to a hard rubber with micro double edge precisely cut for smear-free wiping
- Blade element with soft flexible rubber spine for less wiper noise
- Long service life due to wear-resistant double wiper blade edge, and a special graphite coating providing smooth gliding and quiet operation
- Patented internal metal spring strip for consistent and even contact pressure
- Internal metal strip reduces the chance of corrosion and freezing
- Fitted with Bosch's patented quick-clip adapter
- High quality conventional rear wiper blade
- Fitting instructions included on packaging for all wiper blades
Important compatibility info
| Extra Description | Rear |
| Function | Wiper Blade |
| Length 1 | 380 mm |
| Wiper blade type | Bracket wiper blade |
| Placement on Vehicle | Rear |
| Type | Wiper Blade |
| Title | Bosch Super Plus Conventional Blade Rear 400mm |
Additional Information
- Superb windscreen cleaning thanks to a hard rubber with micro double edge precisely cut for smear-free wiping
- Blade element with soft flexible rubber spine for less wiper noise
- Long service life due to wear-resistant double wiper blade edge, and a special graphite coating providing smooth gliding and quiet operation
- Patented internal metal spring strip for consistent and even contact pressure
- Internal metal strip reduces the chance of corrosion and freezing
- Fitted with Bosch's patented quick-clip adapter
- High quality conventional rear wiper blade
- Fitting instructions included on packaging for all wiper blades
Important compatibility info
| Height | 115 mm |
| Filter type | Filter Insert |
| Outer diameter | 64 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
| Inner diameter 1 | 31 mm |
Important compatibility info
| Height | 115 mm |
| Filter type | Filter Insert |
| Outer diameter | 64 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
| Inner diameter 1 | 31 mm |
Important compatibility info
| Filter type | Spin-on Filter |
| Height | 100 mm |
| Function | Oil Filter |
| Gasket inner diameter | 62 mm |
| Outer diameter | 76 mm |
| Thread Size | 3/4" 16 UNF-2B |
| Type | Oil Filter |
| Gasket outer diameter | 72 mm |
| Bypass Valve Opening Pressure | 1 bar |
Important compatibility info
| Filter type | Spin-on Filter |
| Height | 100 mm |
| Function | Oil Filter |
| Gasket inner diameter | 62 mm |
| Outer diameter | 76 mm |
| Thread Size | 3/4" 16 UNF-2B |
| Type | Oil Filter |
| Gasket outer diameter | 72 mm |
| Bypass Valve Opening Pressure | 1 bar |
Important compatibility info
| Diameter 1 | 12.2 mm |
| Paired article numbers | TC2054 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Width | 42 mm |
| Height | 42 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Length | 115 mm |
| Placement on Vehicle | Front Axle Left |
| Diameter 2 | 14.2 mm |
Important compatibility info
| Diameter 1 | 12.2 mm |
| Paired article numbers | TC2054 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Width | 42 mm |
| Height | 42 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Length | 115 mm |
| Placement on Vehicle | Front Axle Left |
| Diameter 2 | 14.2 mm |
Important compatibility info
| Diameter 1 | 12.2 mm |
| Material | Steel |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Width | 42 mm |
| Height | 42 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | TC2053 |
| Length | 115 mm |
| Placement on Vehicle | Front Axle Right |
| Diameter 2 | 14.2 mm |
Important compatibility info
| Diameter 1 | 12.2 mm |
| Material | Steel |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Width | 42 mm |
| Height | 42 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | TC2053 |
| Length | 115 mm |
| Placement on Vehicle | Front Axle Right |
| Diameter 2 | 14.2 mm |
Important compatibility info
| Inner diameter 1 | 22 mm |
| Function | Bushing, stabiliser bar |
| Thickness/Strength 1 | 41 mm |
| Type | Bushing, stabiliser bar |
| Placement on Vehicle | Front, Left, Right, Lower |
Important compatibility info
| Inner diameter 1 | 22 mm |
| Function | Bushing, stabiliser bar |
| Thickness/Strength 1 | 41 mm |
| Type | Bushing, stabiliser bar |
| Placement on Vehicle | Front, Left, Right, Lower |
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 61 66 1 377 830 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 61 66 1 377 830 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.7 mm |
| Thickness | 65 mm |
| Outer diameter | 43 mm |
| Material | Rubber/Metal |
| Width | 53 mm |
| Length | 65 mm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.7 mm |
| Thickness | 65 mm |
| Outer diameter | 43 mm |
| Material | Rubber/Metal |
| Width | 53 mm |
| Length | 65 mm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width 2 | 14 mm |
| Outer diameter 2 | 50 mm |
| Width 1 | 14 mm |
| Outer diameter 1 | 40 mm |
| Inner diameter 2 | 29 mm |
| Inner diameter 1 | 17.5 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (05004)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width 2 | 14 mm |
| Outer diameter 2 | 50 mm |
| Width 1 | 14 mm |
| Outer diameter 1 | 40 mm |
| Inner diameter 2 | 29 mm |
| Inner diameter 1 | 17.5 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (05004)
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
| Extra Description | febi Plus |
| for OE number | 191 905 855 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 90 mm |
| Outer diameter | 77 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 90 mm |
| Outer diameter | 77 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Paired article numbers | 180980 |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 21 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Paired article numbers | 180980 |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 21 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
| Spanner Size | 21 |
| Paired article numbers | 180979 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
| Spanner Size | 21 |
| Paired article numbers | 180979 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 203 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Length | 224 mm |
| Height | 30 mm |
| Basic version (Part No.) | 184134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 203 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Length | 224 mm |
| Height | 30 mm |
| Basic version (Part No.) | 184134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 316 mm |
| Height | 44 mm |
| Width | 199 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 316 mm |
| Height | 44 mm |
| Width | 199 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bonnet Lock |
| Function | Bonnet Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
| Number of Connectors / Ports | 1 |
| Pressure | 0.4 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























