Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 175 mm |
| Height | 52 mm |
| Width | 142 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 175 mm |
| Height | 52 mm |
| Width | 142 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 111 mm |
| Outer diameter | 75 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Internal Thread Size | M14 x 1,5, M12 x 1,25 |
| Type | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 111 mm |
| Outer diameter | 75 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Internal Thread Size | M14 x 1,5, M12 x 1,25 |
| Type | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| External Thread Size | M14 x 2 |
| Surface | Zinc-coated |
| Length | 112 mm |
| Internal Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| DIN / ISO | 985 |
| Paired article numbers | ADJ138716 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| External Thread Size | M14 x 2 |
| Surface | Zinc-coated |
| Length | 112 mm |
| Internal Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| DIN / ISO | 985 |
| Paired article numbers | ADJ138716 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| DIN / ISO | 985 |
| Surface | Zinc-coated |
| Paired article numbers | ADJ138715 |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| DIN / ISO | 985 |
| Surface | Zinc-coated |
| Paired article numbers | ADJ138715 |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Height | 175 mm |
| Outer diameter | 70 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Replaces | ADM52306; ADM52308; ADM52313; ADM52326 |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Height | 175 mm |
| Outer diameter | 70 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Replaces | ADM52306; ADM52308; ADM52313; ADM52326 |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Filter type | Filter Insert |
| Length | 309 mm |
| Height | 52 mm |
| Width | 230 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Filter type | Filter Insert |
| Length | 309 mm |
| Height | 52 mm |
| Width | 230 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 277 mm |
| Width | 188 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 37 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Length | 277 mm |
| Width | 188 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 37 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| To be used with part number(s) | BM91760H |
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
£10.27
Important compatibility info
| To be used with part number(s) | BM91760H |
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
£10.27
Important compatibility info
| Type | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM92863H |
| Function | Mounting Kit, catalytic converter |
£10.27
Important compatibility info
| Type | Mounting Kit, catalytic converter |
| To be used with part number(s) | BM92863H |
| Function | Mounting Kit, catalytic converter |
£10.27
Important compatibility info
| Thread Type | with internal thread, with external thread |
| Length | 452 mm |
| Function | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
£10.27
Important compatibility info
| Thread Type | with internal thread, with external thread |
| Length | 452 mm |
| Function | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
£10.27
Important compatibility info
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Thread Size | M12x1.25 |
| Thread Measurement 1 | M34x1.5 |
| Bore Diameter 1 | 14 mm |
| Bore Diameter 2 | 16 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Upper |
£10.27
Important compatibility info
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Thread Size | M12x1.25 |
| Thread Measurement 1 | M34x1.5 |
| Bore Diameter 1 | 14 mm |
| Bore Diameter 2 | 16 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Upper |
£10.27
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
£10.27
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
£10.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
£10.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
£10.27
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 105 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
£10.27
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 105 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
£10.27
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Width | 174 mm |
| Height | 53 mm |
| Length | 335 mm |
| Type | Air Filter |
£10.27
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Width | 174 mm |
| Height | 53 mm |
| Length | 335 mm |
| Type | Air Filter |
£10.27
Important compatibility info
| Function | Fastening Bolt, control arm |
| Type | Fastening Bolt, control arm |
£10.27
Important compatibility info
| Function | Fastening Bolt, control arm |
| Type | Fastening Bolt, control arm |
£10.27
Important compatibility info
| Additional Information | with gaskets/seals |
| Outer diameter | 68 mm |
| Filter type | Filter Insert |
| Height | 79 mm |
| Inner diameter 1 | 28 mm |
| Function | Oil Filter |
| Type | Oil Filter |
£10.27
Important compatibility info
| Additional Information | with gaskets/seals |
| Outer diameter | 68 mm |
| Filter type | Filter Insert |
| Height | 79 mm |
| Inner diameter 1 | 28 mm |
| Function | Oil Filter |
| Type | Oil Filter |
£10.27
Important compatibility info
| Filter type | Activated Carbon Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
| Width | 108 mm |
| Length | 240 mm |
| Height | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Filter type | Activated Carbon Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
| Width | 108 mm |
| Length | 240 mm |
| Height | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | both sides |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Shape/Form | slotted |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | both sides |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Shape/Form | slotted |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Length | 96 mm |
| Material | Plastic |
| Function | Mounting, stabiliser bar |
| Inner diameter | 60 mm |
| Outer diameter | 74 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Length | 96 mm |
| Material | Plastic |
| Function | Mounting, stabiliser bar |
| Inner diameter | 60 mm |
| Outer diameter | 74 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Lock System | with two keys |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Type | Rubber Buffer, driver cab |
| Placement on Vehicle | both sides |
| Function | Rubber Buffer, driver cab |
| Height | 48 mm |
| External Thread Size | M12 x 1,75 |
| Outer diameter | 50.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Type | Rubber Buffer, driver cab |
| Placement on Vehicle | both sides |
| Function | Rubber Buffer, driver cab |
| Height | 48 mm |
| External Thread Size | M12 x 1,75 |
| Outer diameter | 50.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Internal Thread Size | M16 |
| Function | Holder, Wheel Chock |
| Type | Holder, Wheel Chock |
| Material | PA (polyamide) |
| Length | 214.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Type | Air Filter |
| Length | 334 mm |
| Height | 35 mm |
| Width | 137 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Type | Air Filter |
| Length | 334 mm |
| Height | 35 mm |
| Width | 137 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 610 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 610 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023