Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Oil Pressure |
| Compression Height | 353 mm |
| Placement on Vehicle | Front Axle |
| Diameter | 50 mm |
| Type | Shock Absorber |
| Height | 522 mm |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 42.1 mm |
| Outer diameter | 310 mm |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 42.1 mm |
| Outer diameter | 310 mm |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Rotor Style | Vented |
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (6PK1640)
- 1x Gates Belt Tensioner, v-ribbed belt (T39471)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36766)
Important compatibility info
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (6PK1640)
- 1x Gates Belt Tensioner, v-ribbed belt (T39471)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36766)
Important compatibility info
| Function | Timing Belt Kit |
| Only in connection with | QCP3675BH |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB711)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1025)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1024)
Important compatibility info
| Function | Timing Belt Kit |
| Only in connection with | QCP3675BH |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB711)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1025)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1024)
Important compatibility info
| Outer diameter | 285 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 127 mm |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 100 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 285 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 127 mm |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 100 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter 1 | 148 mm |
| Width 1 | 78 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter 1 | 148 mm |
| Width 1 | 78 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 76 mm |
| Outer diameter | 344 mm |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 28.4 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 140 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | internally vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 76 mm |
| Outer diameter | 344 mm |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 28.4 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 140 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | internally vented |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | before catalytic converter |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 330 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.172 kg |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | before catalytic converter |
| Type | Oxygen Sensor |
| Weight | 0.14 kg |
| Cable Length | 330 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.172 kg |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 460 mm |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Weight | 0.2 kg |
| Type | Lambda Sensor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Lambda Sensor |
| Cable Length | 460 mm |
| Connector Shape | Rectangular |
| Housing Colour | Grey |
| Number of Poles | 4 -pin connector |
| Weight | 0.2 kg |
| Type | Lambda Sensor |
Important compatibility info
| Height | 546 mm |
| Outer diameter | 258 mm |
| Inner diameter | 160 mm |
| Outer diameter 1 | 311 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Height | 546 mm |
| Outer diameter | 258 mm |
| Inner diameter | 160 mm |
| Outer diameter 1 | 311 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Height | 484 mm |
| Outer diameter | 318 mm |
| Inner diameter | 208 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Part number of recommended accessories | CF 22 160 |
| Function | Air Filter |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Height | 484 mm |
| Outer diameter | 318 mm |
| Inner diameter | 208 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Part number of recommended accessories | CF 22 160 |
| Function | Air Filter |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Opening Temperature | 89 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with seal rings |
| Extra Description | EASY FIT |
Important compatibility info
| Opening Temperature | 89 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with seal rings |
| Extra Description | EASY FIT |
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70208B |
| To be used with part number(s) | FK70208 |
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Function | Exhaust Pipe |
| Includes fitting kit | FK70208B |
| To be used with part number(s) | FK70208 |
Important compatibility info
| External Teeth, Wheel Side | 22 |
| Diameter 2 | 94 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 751 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1249)
Important compatibility info
| External Teeth, Wheel Side | 22 |
| Diameter 2 | 94 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 751 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1249)
Important compatibility info
Additional Information
- Can be used in situ no need to remove trailing link assembly from vehicle.
- Remove/install Fiesta IV rear axle mounting bushes.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Width | 280 mm |
| Height | 90 mm |
| Length | 290 mm |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Left, Upper, Right, Front |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Width | 280 mm |
| Height | 90 mm |
| Length | 290 mm |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Left, Upper, Right, Front |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Extra Description | Direct fit switching sensor |
| Extra Info | Sensor Type: O2 |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| for OE number | BP6F18861B |
| Cable Length | 880 mm |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Gross Weight | 163 g |
| Weight | 130 g |
| Thread Size | M18x1.5 |
Important compatibility info
| Extra Description | Direct fit switching sensor |
| Extra Info | Sensor Type: O2 |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Function | Oxygen Sensor |
| for OE number | BP6F18861B |
| Cable Length | 880 mm |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Gross Weight | 163 g |
| Weight | 130 g |
| Thread Size | M18x1.5 |
Important compatibility info
| Weight | 0.344 kg |
| Net weight | 0.298 kg |
| Extra Description | Fuel Parts |
| Function | Diverter Valve, charger |
| Type | Diverter Valve, charger |
Important compatibility info
| Weight | 0.344 kg |
| Net weight | 0.298 kg |
| Extra Description | Fuel Parts |
| Function | Diverter Valve, charger |
| Type | Diverter Valve, charger |
Important compatibility info
| Terminal Layout | 0 |
| Length | 243 mm |
| Height | 175 mm |
| Width | 175 mm |
| Voltage | 12V |
| Ampere-Hours | 60Ah |
| Hold-down Type | B13 |
| Terminal Type | 19 |
| Type | Lead Acid Battery |
| Warranty | 4 Year Warranty |
| Battery Type Code | 097 |
| Other Part Number | 097 |
| Cold Cranking Amperage (CCA) | 570 A |
Important compatibility info
| Terminal Layout | 0 |
| Length | 243 mm |
| Height | 175 mm |
| Width | 175 mm |
| Voltage | 12V |
| Ampere-Hours | 60Ah |
| Hold-down Type | B13 |
| Terminal Type | 19 |
| Type | Lead Acid Battery |
| Warranty | 4 Year Warranty |
| Battery Type Code | 097 |
| Other Part Number | 097 |
| Cold Cranking Amperage (CCA) | 570 A |
Important compatibility info
| Function | Sensor, wheel speed |
| Temperature range to | 150 °C |
| Temperature range from | -40 °C |
| Sensor Type | Inductive Sensor |
| Overall Length | 1015 mm |
| Additional Information 2 | with cable |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Sensor, wheel speed |
| Temperature range to | 150 °C |
| Temperature range from | -40 °C |
| Sensor Type | Inductive Sensor |
| Overall Length | 1015 mm |
| Additional Information 2 | with cable |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle |
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Length | 861 mm |
| Cone Size | 28.6 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Length | 861 mm |
| Cone Size | 28.6 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB474)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT477)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT486)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB474)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT477)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT486)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 43 mm |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 12 mm |
| Number of Holes | 5 |
| Minimum thickness | 10 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | solid |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 43 mm |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 12 mm |
| Number of Holes | 5 |
| Minimum thickness | 10 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | solid |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Operating Mode | Mechanical |
| Outer diameter | 75 mm |
| Housing material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























