Important compatibility info
| Number of Teeth | 39 |
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in the fuel tank |
| Weight | 0.953 kg |
| Type | Fuel Feed Unit |
| Extra Description | Lucas Premium Blade |
| Plug Type | Female |
| Net weight | 0.85 kg |
Important compatibility info
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in the fuel tank |
| Weight | 0.953 kg |
| Type | Fuel Feed Unit |
| Extra Description | Lucas Premium Blade |
| Plug Type | Female |
| Net weight | 0.85 kg |
Important compatibility info
| Cold Cranking Amperage (CCA) | 540 A |
| Battery Type Code | 068 |
| Extra Description | Lucas Premium |
| Type | Starter Battery |
| Ampere-Hours | 68 Ah |
| Terminal Layout | Positive Front Right |
| Function | Starter Battery |
| Key Words | 540A; 68Ah; 4Yr Warranty; 266x175x220 |
| Warranty | 4 year warranty |
Additional Information
Technical Information
Premium
Important compatibility info
| Cold Cranking Amperage (CCA) | 540 A |
| Battery Type Code | 068 |
| Extra Description | Lucas Premium |
| Type | Starter Battery |
| Ampere-Hours | 68 Ah |
| Terminal Layout | Positive Front Right |
| Function | Starter Battery |
| Key Words | 540A; 68Ah; 4Yr Warranty; 266x175x220 |
| Warranty | 4 year warranty |
Additional Information
Technical Information
Premium
Important compatibility info
| Outer diameter | 300 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 300 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| To be used with part number(s) | FK90078 |
| Includes fitting kit | FK90078B |
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| To be used with part number(s) | FK90078 |
| Includes fitting kit | FK90078B |
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Additional Information | with fastening/mounting material |
| Operating Mode | Electric |
| Additional Information 2 | with connector parts |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Additional Information | with fastening/mounting material |
| Operating Mode | Electric |
| Additional Information 2 | with connector parts |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 5 -pin connector |
| Connector Shape | Rectangular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | without integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 5 -pin connector |
| Connector Shape | Rectangular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | without integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Net weight | 0.286 kg |
| Extra Description | Fuel Parts |
| Function | Sender Unit, fuel tank |
| Plug Type | Female |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | in fuel tank |
| Type | Sender Unit, fuel tank |
| Weight | 0.524 kg |
Important compatibility info
| Net weight | 0.286 kg |
| Extra Description | Fuel Parts |
| Function | Sender Unit, fuel tank |
| Plug Type | Female |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | in fuel tank |
| Type | Sender Unit, fuel tank |
| Weight | 0.524 kg |
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5626XS)
- 1x Gates Tensioner Pulley, timing belt (T43156)
- 1x Gates Water Pump, engine cooling (WP0069)
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5626XS)
- 1x Gates Tensioner Pulley, timing belt (T43156)
- 1x Gates Water Pump, engine cooling (WP0069)
Important compatibility info
| Length | 151 mm |
| Height | 161 mm |
| Width | 87 mm |
| Voltage | 12 V |
| Terminal Type | Bike Box Terminal |
| Type | AGM |
| Cold Cranking Amperage (CCA) | 250 A |
| Terminal Layout | Unibull Pos and Neg Left and Right |
| Battery Type Code | YTX16-BS Compatible |
| Battery Capacity 10h (Ah) | 19 Ah |
| Warranty | 2 year warranty |
Important compatibility info
| Length | 151 mm |
| Height | 161 mm |
| Width | 87 mm |
| Voltage | 12 V |
| Terminal Type | Bike Box Terminal |
| Type | AGM |
| Cold Cranking Amperage (CCA) | 250 A |
| Terminal Layout | Unibull Pos and Neg Left and Right |
| Battery Type Code | YTX16-BS Compatible |
| Battery Capacity 10h (Ah) | 19 Ah |
| Warranty | 2 year warranty |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 51 mm |
| Outer diameter | 350 mm |
| Brake Disc Thickness | 32 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Drilled dimples, slotted, Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 51 mm |
| Outer diameter | 350 mm |
| Brake Disc Thickness | 32 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Drilled dimples, slotted, Vented |
Important compatibility info
| Other Part Number | U5105 |
| Number of Poles | 3 -pin connector |
| Number of Inlets / Outlets | 1 |
| Ignition Coil | Connector Type SAE |
| Type | Ignition Coil |
| Function | Ignition Coil |
Important compatibility info
| Other Part Number | U5105 |
| Number of Poles | 3 -pin connector |
| Number of Inlets / Outlets | 1 |
| Ignition Coil | Connector Type SAE |
| Type | Ignition Coil |
| Function | Ignition Coil |
Important compatibility info
| Material | Cast Iron |
| Piston Diameter | 38 mm |
| Brake Caliper Type | Fist-type Caliper, Brake Caliper with integrated parking brake |
| Paired article numbers | BHN186E |
| Placement on Vehicle | Rear Axle Right |
| Manufacturer Restriction | TRW |
| Function | Brake Caliper |
| Replaces | BHN187 |
| Type | Brake Caliper |
Important compatibility info
| Material | Cast Iron |
| Piston Diameter | 38 mm |
| Brake Caliper Type | Fist-type Caliper, Brake Caliper with integrated parking brake |
| Paired article numbers | BHN186E |
| Placement on Vehicle | Rear Axle Right |
| Manufacturer Restriction | TRW |
| Function | Brake Caliper |
| Replaces | BHN187 |
| Type | Brake Caliper |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Placement on Vehicle | Rear Axle Right |
| Steering arm type | Trailing Arm |
| Model | GLE300D GLE450EQ |
| Paired article numbers | AST2947 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Placement on Vehicle | Rear Axle Right |
| Steering arm type | Trailing Arm |
| Model | GLE300D GLE450EQ |
| Paired article numbers | AST2947 |
Important compatibility info
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| To be used with part number(s) | FK50916 |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| To be used with part number(s) | FK50916 |
| Placement on Vehicle | Rear |
Important compatibility info
Important compatibility info
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with start-stop function |
| Ampere-Hours | 60 Ah |
| Cold-test Current, EN | 680 A |
| Battery | AGM Battery |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | NAPA Battery |
| Title | AGM Start Stop Plus Battery 12V - 60Ah - 680A |
| Hold-down Type | B13 |
| Terminal Type | T1 |
| Battery Type Code | 027 AGM |
Additional Information
- AGM (Absorbent Glass Mat) Start-Stop Technology - Absorbed Glass Mat is manufactured specifically for Micro-Hybrid vehicles fitted with the Start-Stop, Brake Energy Regeneration and other technologies designed to reduce fuel consumption.
- OE Equivalent - Original Quality Spare Part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom the
- 5-8% CO₂ & Fuel Saving - With enhanced technologies to reduce the CO₂ levels & to encourage fuel savings of 5-8%.
- Superior Cyclic Performance → 360,000+ Start-Stop Cycles - Not only can these batteries cope with increased demand from fuel saving devices on the vehicle, they are also able to power a wider range of in car equipment when the engine is idle.
- For ALL Micro-Hybrid Start-Stop Vehicles - This battery is suitable for ALL vehicles with the Micro Hybrid Start-Stop Feature.
- Required for Brake Energy Regeneration (BER) systems - For every vehicle that has the Brake Energy Regeneration designed to help reduce fuel consumption, they must be fitted with an AGM battery.
- WARNING - REPLACE AGM WITH AGM TECHNOLOGY ONLY - You must replace an AGM battery with another AGM battery only.
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with start-stop function |
| Ampere-Hours | 60 Ah |
| Cold-test Current, EN | 680 A |
| Battery | AGM Battery |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | NAPA Battery |
| Title | AGM Start Stop Plus Battery 12V - 60Ah - 680A |
| Hold-down Type | B13 |
| Terminal Type | T1 |
| Battery Type Code | 027 AGM |
Additional Information
- AGM (Absorbent Glass Mat) Start-Stop Technology - Absorbed Glass Mat is manufactured specifically for Micro-Hybrid vehicles fitted with the Start-Stop, Brake Energy Regeneration and other technologies designed to reduce fuel consumption.
- OE Equivalent - Original Quality Spare Part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom the
- 5-8% CO₂ & Fuel Saving - With enhanced technologies to reduce the CO₂ levels & to encourage fuel savings of 5-8%.
- Superior Cyclic Performance → 360,000+ Start-Stop Cycles - Not only can these batteries cope with increased demand from fuel saving devices on the vehicle, they are also able to power a wider range of in car equipment when the engine is idle.
- For ALL Micro-Hybrid Start-Stop Vehicles - This battery is suitable for ALL vehicles with the Micro Hybrid Start-Stop Feature.
- Required for Brake Energy Regeneration (BER) systems - For every vehicle that has the Brake Energy Regeneration designed to help reduce fuel consumption, they must be fitted with an AGM battery.
- WARNING - REPLACE AGM WITH AGM TECHNOLOGY ONLY - You must replace an AGM battery with another AGM battery only.
Important compatibility info
| Cooling Type | Water-cooled |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Important compatibility info
| Cooling Type | Water-cooled |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 307 mm |
| Rotor Style | Solid |
| Fulfils ECE norm | ECE-R90 |
| Height | 63.7 mm |
| Centering Diameter | 62.01 mm |
| Function | Brake Disc |
| Minimum thickness | 10.5 mm |
| Number of Holes | 5 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Drill Diameter, up to | 14.8 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 12 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 307 mm |
| Rotor Style | Solid |
| Fulfils ECE norm | ECE-R90 |
| Height | 63.7 mm |
| Centering Diameter | 62.01 mm |
| Function | Brake Disc |
| Minimum thickness | 10.5 mm |
| Number of Holes | 5 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Drill Diameter, up to | 14.8 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 12 mm |
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Type | Brake Disc Rotor |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 67 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Height | 63.6 mm |
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Net weight | 8.2 kg |
Important compatibility info
| Type | Brake Disc Rotor |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 67 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Height | 63.6 mm |
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Net weight | 8.2 kg |
Important compatibility info
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Material | Aluminium |
| Extra Description | EASY FIT |
| Core Length | 559 mm |
| Core Width | 445 mm |
| Core Depth | 26 mm |
| Type | Radiator, engine cooling |
| Additional Information 2 | with mounting parts |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























