Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174795 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Cast Steel |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length 1 | 875 mm |
| Length 2 | 1149 mm |
| Length 3 | 794 mm |
| Length 4 | 1050 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 875 mm |
| Length 2 | 1149 mm |
| Length 3 | 794 mm |
| Length 4 | 1050 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (6PK2403)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38097)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38099)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38059)
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (6PK2403)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38097)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38099)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T38059)
Important compatibility info
| Weight | 0.092 kg |
| Net weight | 0.080 kg |
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Bosch |
| Distributor/ Rotor | Interference Suppression |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Weight | 0.092 kg |
| Net weight | 0.080 kg |
| Function | Ignition Distributor Rotor |
| Manufacturer Restriction | Bosch |
| Distributor/ Rotor | Interference Suppression |
| Type | Ignition Distributor Rotor |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Centering Diameter | 93 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Minimum thickness | 28 mm |
| Brake Disc Thickness | 31 mm |
| Outer diameter | 308 mm |
| Height | 61 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCP8061, JCW277, NKF8362, NKF8530, NKF8531 |
| Weight | 11.3 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Replaces | FOR219 |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Centering Diameter | 93 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Minimum thickness | 28 mm |
| Brake Disc Thickness | 31 mm |
| Outer diameter | 308 mm |
| Height | 61 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Paired article numbers | JCP8061, JCW277, NKF8362, NKF8530, NKF8531 |
| Weight | 11.3 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Replaces | FOR219 |
Important compatibility info
| Net weight | 0.080 kg |
| Extra Description | Kerr Nelson |
| Function | Rotor, distributor |
| Manufacturer Restriction | Bosch |
| Distributor/ Rotor | Interference Suppression |
| Type | Rotor, distributor |
| Weight | 0.092 kg |
Important compatibility info
| Net weight | 0.080 kg |
| Extra Description | Kerr Nelson |
| Function | Rotor, distributor |
| Manufacturer Restriction | Bosch |
| Distributor/ Rotor | Interference Suppression |
| Type | Rotor, distributor |
| Weight | 0.092 kg |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Number of Connectors / Ports | 2 |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS2, BSC1 |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
| Function | Brake Caliper |
| Piston diameter 2 | 48 mm |
| Piston diameter 1 | 40 mm |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Number of Connectors / Ports | 2 |
| for brake disc thickness | 24 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS2, BSC1 |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
| Function | Brake Caliper |
| Piston diameter 2 | 48 mm |
| Piston diameter 1 | 40 mm |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake System | Mobis |
| Diameter 1 | 34 mm |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake |
| Paired article numbers | JBH1517L, JBH1517R, JCA1753R, JCP8083, KIA132 |
| Weight | 2.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Additional Information | without accessories |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake System | Mobis |
| Diameter 1 | 34 mm |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake |
| Paired article numbers | JBH1517L, JBH1517R, JCA1753R, JCP8083, KIA132 |
| Weight | 2.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Additional Information | without accessories |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake System | Mobis |
| Diameter 1 | 34 mm |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake |
| Paired article numbers | JBH1517L, JBH1517R, JCA1753L, JCP8083, KIA132 |
| Weight | 2.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Additional Information | without accessories |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake System | Mobis |
| Diameter 1 | 34 mm |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake |
| Paired article numbers | JBH1517L, JBH1517R, JCA1753L, JCP8083, KIA132 |
| Weight | 2.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Additional Information | without accessories |
Important compatibility info
| Diameter | 230 mm |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Replaces | 623180360 |
Additional Information
- 1x LuK Clutch Pressure Plate (123024110)
- 1x LuK Clutch Disc (323081110)
- 1x LuK Clutch Release Bearing (500041610)
Important compatibility info
| Diameter | 230 mm |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Replaces | 623180360 |
Additional Information
- 1x LuK Clutch Pressure Plate (123024110)
- 1x LuK Clutch Disc (323081110)
- 1x LuK Clutch Release Bearing (500041610)
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Marelli |
| Alternator Charge Current | 75 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 4 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 5.4 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
| Belt Pulley Diameter | 60 mm |
| Number of mounting bores | 3 |
| Clamp | B+ M8 |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Marelli |
| Alternator Charge Current | 75 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 4 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 5.4 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
| Belt Pulley Diameter | 60 mm |
| Number of mounting bores | 3 |
| Clamp | B+ M8 |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Solid |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Manufacturer | HYUNDAI KIA |
| Model | SPORTAGE TUCSON |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Solid |
| Brake System | Mando |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Manufacturer | HYUNDAI KIA |
| Model | SPORTAGE TUCSON |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Temperature range to | 130 °C |
| Temperature range from | -40 °C |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Temperature range to | 130 °C |
| Temperature range from | -40 °C |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Number of Teeth | 111 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB314)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT198)
- 1x Quinton Hazell Bolt (ENG43005)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3454)
- 1x Quinton Hazell Gasket Kit, crankcase (ENG41008)
Important compatibility info
| Number of Teeth | 111 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB314)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT198)
- 1x Quinton Hazell Bolt (ENG43005)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3454)
- 1x Quinton Hazell Gasket Kit, crankcase (ENG41008)
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2237S |
| Cone Size | 23.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 458 mm |
| Width | 111 mm |
| Thread Size | M20x1,5 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2237S |
| Cone Size | 23.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 458 mm |
| Width | 111 mm |
| Thread Size | M20x1,5 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2236S |
| Cone Size | 23.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Length | 458 mm |
| Width | 111 mm |
| Thread Size | M20x1,5 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2236S |
| Cone Size | 23.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Length | 458 mm |
| Width | 111 mm |
| Thread Size | M20x1,5 |
Important compatibility info
Important compatibility info
| Type | Wet |
| Ampere-Hours | 30 A |
| Cold Cranking Amperage (CCA) | 300 A |
| Terminal Layout | Positive Front Right |
| Terminal Type | Bolt Through |
| Weight | 8000 |
| Length | 187 mm |
| Height | 165 mm |
| Width | 128 mm |
| Voltage | 12 V |
| Warranty | 2 year warranty |
Important compatibility info
| Type | Wet |
| Ampere-Hours | 30 A |
| Cold Cranking Amperage (CCA) | 300 A |
| Terminal Layout | Positive Front Right |
| Terminal Type | Bolt Through |
| Weight | 8000 |
| Length | 187 mm |
| Height | 165 mm |
| Width | 128 mm |
| Voltage | 12 V |
| Warranty | 2 year warranty |
Important compatibility info
| Outer diameter | 240 mm |
| Number of Teeth | 26 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 240 mm |
| Number of Teeth | 26 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
| Clutch | Replacement for self-adjusting clutch pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 437 mm |
| Width | 339 mm |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | TC4510 |
| Height | 90 mm |
| Thread Measurement 1 | M12x1.5 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 437 mm |
| Width | 339 mm |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | TC4510 |
| Height | 90 mm |
| Thread Measurement 1 | M12x1.5 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 64.4 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 64.4 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Pulleys | for v-ribbed belt pulley |
| Housing Type | without housing |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Water Pump, engine cooling |
| Pulleys | for v-ribbed belt pulley |
| Housing Type | without housing |
| Type | Water Pump, engine cooling |
Important compatibility info
| Type | Starter Battery |
| Length | 302 mm |
| Terminal Layout | Positive Front Right |
| Width | 172 mm |
| Height | 220 mm |
| Voltage | 12 V |
| Ampere-Hours | 95 Ah |
| Terminal Type | A |
| Extra Description | SMF |
| Cold Cranking Amperage (CCA) | 720 A |
| Battery Type Code | 249 |
| Hold-down Type | B01 |
| Weight | 21.6 kg |
| Cold-test Current, EN | 720 A |
| Function | Starter Battery |
| Key Words | 720A; 95Ah; 4Yr Warranty; 302x172x220 |
| Warranty | 4 year warranty |
Important compatibility info
| Type | Starter Battery |
| Length | 302 mm |
| Terminal Layout | Positive Front Right |
| Width | 172 mm |
| Height | 220 mm |
| Voltage | 12 V |
| Ampere-Hours | 95 Ah |
| Terminal Type | A |
| Extra Description | SMF |
| Cold Cranking Amperage (CCA) | 720 A |
| Battery Type Code | 249 |
| Hold-down Type | B01 |
| Weight | 21.6 kg |
| Cold-test Current, EN | 720 A |
| Function | Starter Battery |
| Key Words | 720A; 95Ah; 4Yr Warranty; 302x172x220 |
| Warranty | 4 year warranty |
Important compatibility info
| Net weight | 0.528 kg |
| Plug Type | Male |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.934 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
Important compatibility info
| Net weight | 0.528 kg |
| Plug Type | Male |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.934 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























