Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 15.4 mm |
| Height | 36.4 mm |
| Width | 22.9 mm |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Resistance | 109 Ohm |
| Current Strength | 30 A |
| Combi Switch Function | Normally Open Contact |
| Relay function | Normally open contact |
| Type | Relay, fuel pump |
| Temperature range from | -40 °C |
| Temperature range to | 100 °C |
| Function | Relay, fuel pump |
£5.68
Important compatibility info
| Length | 15.4 mm |
| Height | 36.4 mm |
| Width | 22.9 mm |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Resistance | 109 Ohm |
| Current Strength | 30 A |
| Combi Switch Function | Normally Open Contact |
| Relay function | Normally open contact |
| Type | Relay, fuel pump |
| Temperature range from | -40 °C |
| Temperature range to | 100 °C |
| Function | Relay, fuel pump |
£5.68
Important compatibility info
| Surface | Phosphatized |
| Length | 114 mm |
| Material | Steel |
| Colour | Black |
| Thread Length | 42 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Shaft Length | 56 mm |
| Function | Cylinder Head Bolt |
| Outer diameter | 20.6 mm |
| Spanner Size | 10 |
| Number of screws | 10 |
| Quality/ Grade | 8.8 |
| Screw length below head | 102 mm |
| External Thread Size | M12 x 1,5 |
| Type | Cylinder Head Bolt |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Surface | Phosphatized |
| Length | 114 mm |
| Material | Steel |
| Colour | Black |
| Thread Length | 42 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Shaft Length | 56 mm |
| Function | Cylinder Head Bolt |
| Outer diameter | 20.6 mm |
| Spanner Size | 10 |
| Number of screws | 10 |
| Quality/ Grade | 8.8 |
| Screw length below head | 102 mm |
| External Thread Size | M12 x 1,5 |
| Type | Cylinder Head Bolt |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 36 mm |
| Width | 34 mm |
| Material | Rubber |
| Outer diameter | 33.5 mm |
| Thickness | 33.5 mm |
| Inner diameter | 16 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 36 mm |
| Width | 34 mm |
| Material | Rubber |
| Outer diameter | 33.5 mm |
| Thickness | 33.5 mm |
| Inner diameter | 16 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Function | Mount, exhaust system |
| Height | 55 mm |
| Width | 42 mm |
| Inner diameter | 8.5 mm |
| Material | Rubber |
| Length | 35 mm |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Function | Mount, exhaust system |
| Height | 55 mm |
| Width | 42 mm |
| Inner diameter | 8.5 mm |
| Material | Rubber |
| Length | 35 mm |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Thickness | 40 mm |
| Inner diameter | 20 mm |
| Outer diameter | 35 mm |
| Material | Rubber |
| Width | 38 mm |
| Length | 35 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Thickness | 40 mm |
| Inner diameter | 20 mm |
| Outer diameter | 35 mm |
| Material | Rubber |
| Width | 38 mm |
| Length | 35 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Function | Stop- /Mounting Buffer |
| Type | Stop- /Mounting Buffer |
| Buffer Design | B |
| Internal Thread Size | M8 x 1,25 |
| Thickness | 20 mm |
| Outer diameter | 30 mm |
| External Thread Size | M8 x 1,25 |
| Thread Length | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Thread Length | 23 mm |
| Thickness | 15 mm |
| Internal Thread Size | M8 x 1,25 |
| Outer diameter | 30 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Buffer Design | D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 36.5 mm |
| Material | Rubber |
| Inner diameter | 20.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 36.5 mm |
| Material | Rubber |
| Inner diameter | 20.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.68
Important compatibility info
| Function | Mounting Kit, stabiliser link/coupling rod |
| Type | Mounting Kit, stabiliser link/coupling rod |
| Placement on Vehicle | Front Axle, Left, Right |
£5.68
Important compatibility info
| Function | Mounting Kit, stabiliser link/coupling rod |
| Type | Mounting Kit, stabiliser link/coupling rod |
| Placement on Vehicle | Front Axle, Left, Right |
£5.68
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Instruments | with oil temperature gauge |
| Housing Colour | Black |
| Spanner Size | 13 |
| Number of Poles | 1 -pin connector |
| Thread Size | M10 x 1 |
| Weight | 0.02 kg |
| Type | Sensor, coolant temperature |
£5.68
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Instruments | with oil temperature gauge |
| Housing Colour | Black |
| Spanner Size | 13 |
| Number of Poles | 1 -pin connector |
| Thread Size | M10 x 1 |
| Weight | 0.02 kg |
| Type | Sensor, coolant temperature |
£5.68
Important compatibility info
| Weight | 0.18 kg |
| Number of Inlets / Outlets | 5 |
| Type | Ignition Distributor Cap |
| Manufacturer Restriction | SEV |
| Function | Ignition Distributor Cap |
| Net weight | 0.108 kg |
| Distributor/ Rotor | Connector Type DIN |
| Connecting Angle | 90 ° |
£5.68
Important compatibility info
| Weight | 0.18 kg |
| Number of Inlets / Outlets | 5 |
| Type | Ignition Distributor Cap |
| Manufacturer Restriction | SEV |
| Function | Ignition Distributor Cap |
| Net weight | 0.108 kg |
| Distributor/ Rotor | Connector Type DIN |
| Connecting Angle | 90 ° |
£5.68
Important compatibility info
| Net weight | 0.054 kg |
| Colour | White |
| Thread Size | M22 x 1.5 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 29 |
| Technical Information Number | Circuit N.O. |
| Housing Colour | Black |
| Connector Shape | Oval |
| Type | Temperature Switch, radiator fan |
| Operating temperature to | 100 °C |
| Function | Temperature Switch, radiator fan |
| Operating temperature from [C] | 105 °C |
£5.68
Important compatibility info
| Net weight | 0.054 kg |
| Colour | White |
| Thread Size | M22 x 1.5 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 29 |
| Technical Information Number | Circuit N.O. |
| Housing Colour | Black |
| Connector Shape | Oval |
| Type | Temperature Switch, radiator fan |
| Operating temperature to | 100 °C |
| Function | Temperature Switch, radiator fan |
| Operating temperature from [C] | 105 °C |
£5.68
Important compatibility info
| Connector Shape | round |
| Net weight | 0.042 kg |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 24 |
| Number of Poles | 1 -pin connector |
| Thread Size | M16 x 1.5 |
| Switch Pressure | 0.9 bar |
| Type | Oil Pressure Switch |
£5.68
Important compatibility info
| Connector Shape | round |
| Net weight | 0.042 kg |
| Function | Oil Pressure Switch |
| Housing Colour | Black |
| Technical Information Number | Circuit N.O. |
| Spanner Size | 24 |
| Number of Poles | 1 -pin connector |
| Thread Size | M16 x 1.5 |
| Switch Pressure | 0.9 bar |
| Type | Oil Pressure Switch |
£5.68
Important compatibility info
| Weight | 0.054 kg |
| Thread Size | M16 x 1.5 Taper |
| Number of Poles | 1 -pin connector |
| Spanner Size | 19 |
| Connector Shape | Round |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Net weight | 0.046 kg |
£5.68
Important compatibility info
| Weight | 0.054 kg |
| Thread Size | M16 x 1.5 Taper |
| Number of Poles | 1 -pin connector |
| Spanner Size | 19 |
| Connector Shape | Round |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Net weight | 0.046 kg |
£5.68
Important compatibility info
| Net weight | 0.024 kg |
| Weight | 0.024 kg |
| Additional Information 2 | without cable |
| Thread Size | M12 x 1.5 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 19 |
| Colour | White |
| Housing Colour | Green |
| Connector Shape | angular |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Fitting Depth | 28 mm |
£5.68
Important compatibility info
| Net weight | 0.024 kg |
| Weight | 0.024 kg |
| Additional Information 2 | without cable |
| Thread Size | M12 x 1.5 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 19 |
| Colour | White |
| Housing Colour | Green |
| Connector Shape | angular |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Fitting Depth | 28 mm |
£5.68
Important compatibility info
| Weight | 0.1 kg |
| Additional Information 2 | without cable |
| Thread Size | M10 x 1 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 19 |
| Housing Colour | Black |
| Connector Shape | angular |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Net weight | 0.020 kg |
£5.68
Important compatibility info
| Weight | 0.1 kg |
| Additional Information 2 | without cable |
| Thread Size | M10 x 1 |
| Number of Poles | 2 -pin connector |
| Spanner Size | 19 |
| Housing Colour | Black |
| Connector Shape | angular |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Net weight | 0.020 kg |
£5.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023