Important compatibility info
| Type | Interior Blower |
| Function | Interior Blower |
| Driver Position | for right-hand drive vehicles |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Piston diameter 1 | 43 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Material | Grey Cast Iron |
| Function | Brake Caliper |
| for brake disc thickness | 27 mm |
| Manufacturer | HYUNDAI |
| Model | TERRACAN |
| for brake disc diameter | 280 mm |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Brake System | Mando |
| Brake Disc Type | Vented |
| Type | Brake Caliper |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Piston diameter 1 | 43 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Material | Grey Cast Iron |
| Function | Brake Caliper |
| for brake disc thickness | 27 mm |
| Manufacturer | HYUNDAI |
| Model | TERRACAN |
| for brake disc diameter | 280 mm |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Brake System | Mando |
| Brake Disc Type | Vented |
| Type | Brake Caliper |
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 200 mm |
| Number of Teeth | 20 |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 200 mm |
| Number of Teeth | 20 |
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Disc |
| Number of Teeth | 24 |
| Outer diameter | 228 mm |
| for OE number | 30100AA672 |
| Type | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Disc |
| Number of Teeth | 24 |
| Outer diameter | 228 mm |
| for OE number | 30100AA672 |
| Type | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
| Weight | 1.6 g |
| Placement on Vehicle | Left |
| Material | Rubber, Cast Aluminium |
| Operating Mode | Manual |
| Colour | Silver |
| Quality | OE Performance |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Weight | 1.6 g |
| Placement on Vehicle | Left |
| Material | Rubber, Cast Aluminium |
| Operating Mode | Manual |
| Colour | Silver |
| Quality | OE Performance |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 136 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF01840)
- 4x SKF Nut (SKF04663)
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 136 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF01840)
- 4x SKF Nut (SKF04663)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | ADG086122 |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Replaces | ADG086125 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | ADG086122 |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Replaces | ADG086125 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Function | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 1.18 kg |
Important compatibility info
| Function | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 1.18 kg |
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC9701-1)
- 1x BGA Deflection/Guide Pulley, v-ribbed belt (BC9701-2)
- 1x BGA Water Pump, engine cooling (CP2930)
- 1x BGA Timing Belt (TB9701)
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC9701-1)
- 1x BGA Deflection/Guide Pulley, v-ribbed belt (BC9701-2)
- 1x BGA Water Pump, engine cooling (CP2930)
- 1x BGA Timing Belt (TB9701)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 36253 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 36253 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Paired article numbers | QSA3010S |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Paired article numbers | QSA3010S |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | QSA3009S |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | QSA3009S |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Teeth | 9 |
| Function | Starter |
| Manufacturer Restriction | Denso |
| Rated Power | 0.8 kW |
| Voltage | 12 V |
| Type | Starter |
| Weight | 3.22 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Number of Teeth | 9 |
| Function | Starter |
| Manufacturer Restriction | Denso |
| Rated Power | 0.8 kW |
| Voltage | 12 V |
| Type | Starter |
| Weight | 3.22 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Height | 62.4 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 34 mm |
| Number of Holes | 5 |
| Minimum thickness | 31.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
Important compatibility info
| Height | 62.4 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 34 mm |
| Number of Holes | 5 |
| Minimum thickness | 31.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Fulfils ECE norm | ECE-R90 |
| Function | Brake Disc |
| Drill Diameter, up to | 15.3 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 413 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 75 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 413 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 75 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Diameter | 59.5 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Rear Axle |
| Type | Shock Absorber |
| Max. Length | 465 mm |
| Extra Description | Excel-G |
| Function | Shock Absorber |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
Important compatibility info
| Diameter | 59.5 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Rear Axle |
| Type | Shock Absorber |
| Max. Length | 465 mm |
| Extra Description | Excel-G |
| Function | Shock Absorber |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Flange Diameter | 139.3 mm |
| Rim Hole Number | 4 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF00708)
Important compatibility info
| Flange Diameter | 139.3 mm |
| Rim Hole Number | 4 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF00708)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 135 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 4x SKF Screw (SKF00361)
- 1x SKF Bearing (SKF01300)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 135 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 4x SKF Screw (SKF00361)
- 1x SKF Bearing (SKF01300)
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 785 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A1 IBIZA POLO RAPID TOLEDO |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 785 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A1 IBIZA POLO RAPID TOLEDO |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023























