Important compatibility info
| Terminal Type | 1 |
| Length | 232 mm |
| Height | 225 mm |
| Battery Type Code | 005L EFB |
| Terminal Layout | Positive Front Right |
| Cold-test Current, EN | 650 A |
| Ampere-Hours | 65 Ah |
| Voltage | 12 V |
| Width | 173 mm |
| Type | Starter Battery |
| Extra Description | S4E EFB |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 650 A |
| Key Words | 650A; 65Ah; 4Yr Warranty; 232x173x225 |
| Hold-down Type | B13 |
| Warranty | 4 year warranty |
| Title | Bosch S4E40 Battery - 12V - 65Ah - 650CCA |
Additional Information
- Bosch EFB (Enhanced Flooded Battery) technology is specially tailored to the demands of passenger cars with Stop / Start systems.
- More reliable starting even in extreme temperatures and with a large number of electrical devices
- Outstanding charge acceptance and good resistance to short-haul operations
Important compatibility info
| Terminal Type | 1 |
| Length | 232 mm |
| Height | 225 mm |
| Battery Type Code | 005L EFB |
| Terminal Layout | Positive Front Right |
| Cold-test Current, EN | 650 A |
| Ampere-Hours | 65 Ah |
| Voltage | 12 V |
| Width | 173 mm |
| Type | Starter Battery |
| Extra Description | S4E EFB |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 650 A |
| Key Words | 650A; 65Ah; 4Yr Warranty; 232x173x225 |
| Hold-down Type | B13 |
| Warranty | 4 year warranty |
| Title | Bosch S4E40 Battery - 12V - 65Ah - 650CCA |
Additional Information
- Bosch EFB (Enhanced Flooded Battery) technology is specially tailored to the demands of passenger cars with Stop / Start systems.
- More reliable starting even in extreme temperatures and with a large number of electrical devices
- Outstanding charge acceptance and good resistance to short-haul operations
Important compatibility info
| Function | Exhaust Pipe |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
Additional Information
Important compatibility info
| Function | Exhaust Pipe |
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
Additional Information
Important compatibility info
| Number of Poles | 6 -pin connector |
| Weight | 0.152 kg |
| Housing Colour | Black |
| Connector Shape | D Shape |
| Cable Length | 720 mm |
| Lambda Sensor | Broadband Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | NTK |
| Function | Oxygen Sensor |
| Net weight | 0.128 kg |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Number of Poles | 6 -pin connector |
| Weight | 0.152 kg |
| Housing Colour | Black |
| Connector Shape | D Shape |
| Cable Length | 720 mm |
| Lambda Sensor | Broadband Oxygen Sensor |
| Type | Oxygen Sensor |
| Manufacturer Restriction | NTK |
| Function | Oxygen Sensor |
| Net weight | 0.128 kg |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Int. teeth, diff.side, conn.to transm. | 29 |
| Length | 560 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | HONDA |
| Model | ACCORD |
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Int. teeth, diff.side, conn.to transm. | 29 |
| Length | 560 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | HONDA |
| Model | ACCORD |
Important compatibility info
| Diameter | 38 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber System | Monotube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Compression Height | 442 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 627 mm |
| Manufacturer | HONDA |
| Model | CIVIC |
Important compatibility info
| Diameter | 38 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber System | Monotube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Compression Height | 442 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 627 mm |
| Manufacturer | HONDA |
| Model | CIVIC |
Important compatibility info
| Replaces | ADC43205; ADC43216N |
| Outer diameter | 225 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | ADC43205; ADC43216N |
| Outer diameter | 225 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Non-approved |
| Placement on Vehicle | Right |
| To be used with part number(s) | FK90865 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Includes fitting kit | FK90865A |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Extra Description | Non-approved |
| Placement on Vehicle | Right |
| To be used with part number(s) | FK90865 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Includes fitting kit | FK90865A |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91132 |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Product met | Euro 4 |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91132 |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Product met | Euro 4 |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Length 1 | 390 mm |
| Cable Length | 335 mm. 395 mm. 465 mm. 585 mm. 685 mm. 785 mm |
| Length 2 | 390 mm |
| Ignition Coil | Connector Type M4 |
| Distributor/ Rotor | Connector Type M4 |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type SAE, Copper Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Length 1 | 390 mm |
| Cable Length | 335 mm. 395 mm. 465 mm. 585 mm. 685 mm. 785 mm |
| Length 2 | 390 mm |
| Ignition Coil | Connector Type M4 |
| Distributor/ Rotor | Connector Type M4 |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type SAE, Copper Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 13.5 mm |
| Centering Diameter | 64 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 26.5 mm |
| Brake Disc Thickness | 28 mm |
| Outer diameter | 300 mm |
| Rotor Style | Vented |
| Paired article numbers | JCP1641, JCP8057, NKF8232 |
| Surface | Coated |
| Height | 51 mm |
| Weight | 9.08 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 13.5 mm |
| Centering Diameter | 64 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 26.5 mm |
| Brake Disc Thickness | 28 mm |
| Outer diameter | 300 mm |
| Rotor Style | Vented |
| Paired article numbers | JCP1641, JCP8057, NKF8232 |
| Surface | Coated |
| Height | 51 mm |
| Weight | 9.08 kg |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Core Width | 340 mm |
| Core Length | 692 mm |
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Material | Aluminium |
| Core Depth | 16 mm |
| Type | Radiator, engine cooling |
Important compatibility info
| Core Width | 340 mm |
| Core Length | 692 mm |
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Material | Aluminium |
| Core Depth | 16 mm |
| Type | Radiator, engine cooling |
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with adapter |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | EASY FIT |
| Radiator type | Brazed cooling fins |
| Core Length | 733 mm |
| Core Width | 400 mm |
| Core Depth | 17 mm |
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with adapter |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | EASY FIT |
| Radiator type | Brazed cooling fins |
| Core Length | 733 mm |
| Core Width | 400 mm |
| Core Depth | 17 mm |
Important compatibility info
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Number of Teeth | 17 |
| Outer diameter | 212 mm |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Number of Teeth | 17 |
| Outer diameter | 212 mm |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| Paired article numbers | ADJ138625 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| Paired article numbers | ADJ138625 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Left Rear |
| Additional Information | with electric motor |
| Number of Doors | 4 |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Window Lift | Single Rail Window Lift |
| Extra Description | Fahren |
| Type | Window Regulator |
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Left Rear |
| Additional Information | with electric motor |
| Number of Doors | 4 |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Window Lift | Single Rail Window Lift |
| Extra Description | Fahren |
| Type | Window Regulator |
Important compatibility info
| Function | Window Regulator |
| Window Lift | Single Rail Window Lift |
| Extra Description | Fahren |
| Additional Information | with electric motor |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Number of Doors | 4 |
| Type | Window Regulator |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Function | Window Regulator |
| Window Lift | Single Rail Window Lift |
| Extra Description | Fahren |
| Additional Information | with electric motor |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Number of Doors | 4 |
| Type | Window Regulator |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Colour | Black |
| for OE number | 11 12 7 568 581 |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 40427 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 40427 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Paired article numbers | 331050 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Replaces | 331036 |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Paired article numbers | 331050 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Replaces | 331036 |
Important compatibility info
| Inlet Diameter | 14 mm |
| Replaces | AC466000P |
| Type | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Core Depth | 16 mm |
| Net Weight | 2072 g |
| Packaging length | 75.5 cm |
| Packaging width | 11.00 cm |
| Outlet Diameter | 11.0 mm |
| Packaging height | 54.50 cm |
| Function | Condenser, air conditioning |
| Radiator type | Parallel cooling pipes |
| Extra Description | BEHR |
| Core Width | 371 mm |
| Core Length | 516 mm |
Additional Information
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Inlet Diameter | 14 mm |
| Replaces | AC466000P |
| Type | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Core Depth | 16 mm |
| Net Weight | 2072 g |
| Packaging length | 75.5 cm |
| Packaging width | 11.00 cm |
| Outlet Diameter | 11.0 mm |
| Packaging height | 54.50 cm |
| Function | Condenser, air conditioning |
| Radiator type | Parallel cooling pipes |
| Extra Description | BEHR |
| Core Width | 371 mm |
| Core Length | 516 mm |
Additional Information
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Additional Information 2 | with tensioner pulley damper |
| Length 1 | 1143 mm |
| Number of Teeth | 120 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Impeller Diameter | 63.5 mm |
| Width | 30 mm |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC0120-1)
- 1x BGA Deflection/Guide Pulley, v-ribbed belt (BC0120-2)
- 1x BGA Water Pump, engine cooling (CP0106)
- 1x BGA Timing Belt (TB0120)
Important compatibility info
| Additional Information 2 | with tensioner pulley damper |
| Length 1 | 1143 mm |
| Number of Teeth | 120 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Impeller Diameter | 63.5 mm |
| Width | 30 mm |
Additional Information
- 1x BGA Tensioner Pulley, timing belt (BC0120-1)
- 1x BGA Deflection/Guide Pulley, v-ribbed belt (BC0120-2)
- 1x BGA Water Pump, engine cooling (CP0106)
- 1x BGA Timing Belt (TB0120)
Important compatibility info
| Outer diameter | 345 mm |
| Rotor Style | Vented |
| Surface | Oiled |
| Minimum thickness | 16 mm |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 5 |
| Brake Disc Thickness | 18 mm |
| Type | Brake Disc Rotor |
| Drill Diameter, up to | 16.5 mm |
| Function | Brake Disc |
| Centering Diameter | 112 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Height | 76.2 mm |
Important compatibility info
| Outer diameter | 345 mm |
| Rotor Style | Vented |
| Surface | Oiled |
| Minimum thickness | 16 mm |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 5 |
| Brake Disc Thickness | 18 mm |
| Type | Brake Disc Rotor |
| Drill Diameter, up to | 16.5 mm |
| Function | Brake Disc |
| Centering Diameter | 112 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Height | 76.2 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























