Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Net weight | 3.65 kg |
| Paired article numbers | 5011563 |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Net weight | 3.65 kg |
| Paired article numbers | 5011563 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Type | Drive Shaft |
| Number of Teeth, ABS ring | 45 |
| Length | 648 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Type | Drive Shaft |
| Number of Teeth, ABS ring | 45 |
| Length | 648 mm |
Important compatibility info
| Outer diameter | 263 mm |
| Number of Teeth | 10 |
| Function | Clutch Disc |
| Type | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 263 mm |
| Number of Teeth | 10 |
| Function | Clutch Disc |
| Type | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Impeller Diameter | 65 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 67 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Impeller Diameter | 65 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 67 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Terminal Type | 1 |
| Length | 232 mm |
| Height | 225 mm |
| Battery Type Code | 005L EFB |
| Terminal Layout | Positive Front Right |
| Cold-test Current, EN | 650 A |
| Ampere-Hours | 65 Ah |
| Voltage | 12 V |
| Width | 173 mm |
| Type | Starter Battery |
| Extra Description | S4E EFB |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 650 A |
| Key Words | 650A; 65Ah; 4Yr Warranty; 232x173x225 |
| Hold-down Type | B13 |
| Warranty | 4 year warranty |
| Title | Bosch S4E40 Battery - 12V - 65Ah - 650CCA |
Additional Information
- Bosch EFB (Enhanced Flooded Battery) technology is specially tailored to the demands of passenger cars with Stop / Start systems.
- More reliable starting even in extreme temperatures and with a large number of electrical devices
- Outstanding charge acceptance and good resistance to short-haul operations
Important compatibility info
| Terminal Type | 1 |
| Length | 232 mm |
| Height | 225 mm |
| Battery Type Code | 005L EFB |
| Terminal Layout | Positive Front Right |
| Cold-test Current, EN | 650 A |
| Ampere-Hours | 65 Ah |
| Voltage | 12 V |
| Width | 173 mm |
| Type | Starter Battery |
| Extra Description | S4E EFB |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 650 A |
| Key Words | 650A; 65Ah; 4Yr Warranty; 232x173x225 |
| Hold-down Type | B13 |
| Warranty | 4 year warranty |
| Title | Bosch S4E40 Battery - 12V - 65Ah - 650CCA |
Additional Information
- Bosch EFB (Enhanced Flooded Battery) technology is specially tailored to the demands of passenger cars with Stop / Start systems.
- More reliable starting even in extreme temperatures and with a large number of electrical devices
- Outstanding charge acceptance and good resistance to short-haul operations
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 6 -pin connector |
| Manufacturer Restriction | Bosch |
| Type | Oxygen Sensor |
| Weight | 0.154 kg |
| Cable Length | 1085 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.13 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Oxygen Sensor |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 6 -pin connector |
| Manufacturer Restriction | Bosch |
| Type | Oxygen Sensor |
| Weight | 0.154 kg |
| Cable Length | 1085 mm |
| Lambda Sensor | Regulating Sensor |
| Net weight | 0.13 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 895 mm |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
| Number of Teeth, ABS ring | 43 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 895 mm |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
| Number of Teeth, ABS ring | 43 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Brake System | HALDEX DB19 |
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Length 2 | 965 mm |
| Length 3 | 1350 mm |
| Length 4 | 1010 mm |
| Length 1 | 1225 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 965 mm |
| Length 3 | 1350 mm |
| Length 4 | 1010 mm |
| Length 1 | 1225 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 892 mm |
Important compatibility info
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 154 mm |
| Outer diameter 1 | 84 mm |
| Type | Wheel Bearing Kit |
| Additional Information | Photo corresponds to scope of supply |
Important compatibility info
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 154 mm |
| Outer diameter 1 | 84 mm |
| Type | Wheel Bearing Kit |
| Additional Information | Photo corresponds to scope of supply |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter 1 | 84.9 mm |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 75.6 mm |
| Width 2 | 48.6 mm |
| Type | Wheel Bearing Kit |
| Outer diameter | 161.7 mm |
| Additional Information | Photo corresponds to scope of supply |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter 1 | 84.9 mm |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 75.6 mm |
| Width 2 | 48.6 mm |
| Type | Wheel Bearing Kit |
| Outer diameter | 161.7 mm |
| Additional Information | Photo corresponds to scope of supply |
Important compatibility info
| Placement on Vehicle | Rear |
| Width | 254 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Hole Spacing | 205 mm |
| External Thread Size | M20 x 2,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Width | 254 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Hole Spacing | 205 mm |
| External Thread Size | M20 x 2,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 10 -Hole |
| Outer diameter | 376 mm |
| Thickness | 57.5 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 39 mm |
| Bolt Hole Circle Diameter | 190 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Capacity | 60 l |
| Operating Pressure | 12.5 bar |
| Function | Air Tank, compressed-air system |
| Length | 893 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Length | 392 mm |
| Diameter | 14.2 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16x1.5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 270 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M12x1.25 |
| Paired article numbers | FCA8156 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 270 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M12x1.25 |
| Paired article numbers | FCA8156 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1200 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1200 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Weight | 0.996 kg |
| Net weight | 0.976 kg |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with cable |
| Material | Metal |
| Additional Information | without gasket/seal |
| Type | EGR Valve |
Important compatibility info
| Weight | 0.996 kg |
| Net weight | 0.976 kg |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with cable |
| Material | Metal |
| Additional Information | without gasket/seal |
| Type | EGR Valve |
Important compatibility info
| Additional Information | without gasket/seal |
| Weight | 1.181 kg |
| Net weight | 1.078 kg |
| Function | Throttle body |
| Mounting Type | Bolted |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Inlet Diameter | 58 mm |
| Number of Poles | 7 -pin connector |
| Type | Throttle body |
Important compatibility info
| Additional Information | without gasket/seal |
| Weight | 1.181 kg |
| Net weight | 1.078 kg |
| Function | Throttle body |
| Mounting Type | Bolted |
| Connector Shape | D Shape |
| Housing Colour | Black |
| Inlet Diameter | 58 mm |
| Number of Poles | 7 -pin connector |
| Type | Throttle body |
Important compatibility info
| Net weight | 0.966 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with cable |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 0.996 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.966 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Rectangular |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with cable |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 0.996 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.710 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | D-Shape |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 0.714 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 0.710 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | D-Shape |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 0.714 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 1.044 kg |
| Extra Description | Kerr Nelson |
| Function | Throttle body |
| Mounting Type | Screw Connection |
| Connector Shape | D-Shape |
| Housing Colour | Black |
| Inlet Diameter | 56 mm |
| Number of Poles | 7 -pin connector |
| Type | Throttle body |
Important compatibility info
| Net weight | 1.044 kg |
| Extra Description | Kerr Nelson |
| Function | Throttle body |
| Mounting Type | Screw Connection |
| Connector Shape | D-Shape |
| Housing Colour | Black |
| Inlet Diameter | 56 mm |
| Number of Poles | 7 -pin connector |
| Type | Throttle body |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber System | Twin-Tube |
| Length | 170 mm |
| Shock Absorber Type | Gas Pressure |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber System | Twin-Tube |
| Length | 170 mm |
| Shock Absorber Type | Gas Pressure |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























