Important compatibility info
| Mounting Type | Pressed |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Bore Diameter 1 | 38.2 mm |
| Version | Fitting Kit |
| Bore Diameter | 16 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Type | Ball Joint |
| Mounting Type | Pressed |
| Paired article numbers | NST0264 |
Important compatibility info
| Rod/Strut | Push Rod |
| Spanner Size | 10 |
| Function | Ball Joint, axle strut |
| Internal Thread Size | M6 x 1,0 LHT |
| Type | Ball Joint, axle strut |
| Placement on Vehicle | Rear Axle |
| Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer, Lower, Rear |
| Inner diameter | 13 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for control arm |
| Mounting Type | Bolted |
| Number of Rivet Holes | 2 |
| Version | Fitting Kit |
| Bore Diameter | 12.5 mm |
| Function | Ball Joint |
| Number of mounting bores | 2 |
| Type | Ball Joint |
| Diameter | 16 mm |
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Thread Size | M12x1.2 |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Model | BEETLE |
| Manufacturer | VOLKSWAGEN |
| Mounting Type | Pressed |
| Paired article numbers | AST0254 |
Important compatibility info
| Steering arm type | for control arm |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.25 |
| Function | Ball Joint |
| Bore Diameter 2 | 18 mm |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Bore Diameter 1 | 16 mm |
| Bore Diameter | 40 mm |
Important compatibility info
| Diameter | 40 mm |
| Type | Ball Joint |
| Manufacturer | HYUNDAI KIA |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Thread Size | M12x1.25 |
| Mounting Type | Pressed |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0183 |
Important compatibility info
| Bore Diameter 1 | 14.9 mm |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Bore Diameter | 8.5 mm |
| Steering arm type | for control arm |
Important compatibility info
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 8.5 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Steering arm type | for control arm |
| Bore Diameter 1 | 14.9 mm |
Important compatibility info
| Number of mounting bores | 3 |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 8.5 mm |
| Bore Diameter 1 | 14.9 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Bolted |
| Steering arm type | for control arm |
Important compatibility info
| Steering arm type | for control arm |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 8.5 mm |
| Bore Diameter 1 | 14.9 mm |
| Function | Ball Joint |
| Type | Ball Joint |
Important compatibility info
| Function | Ball Joint |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 2 |
| Number of Rivet Holes | 2 |
| Version | Fitting Kit |
| Bore Diameter | 15 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Bolted |
| Bore Diameter 1 | 12.5 mm |
| Steering arm type | for control arm |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left, Lower |
| Function | Ball Joint |
| Cone Size | 17 mm |
| Mounting points diameter | 7.2 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M12x1.25 |
| Function | Ball Joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Mounting Type | Pressed |
| Paired article numbers | NST0267 |
Important compatibility info
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Thread Measurement 2 | M38x1.5 |
| Thread Measurement 1 | M14x1.5 |
| Bore Diameter 1 | 15.6 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | BBJ5541 |
Important compatibility info
| Steering arm type | for control arm |
| Mounting Type | Pressed |
| Bore Diameter 1 | 37 mm |
| Diameter | 16 mm |
| Function | Ball Joint |
| Type | Ball Joint |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Manufacturer | NISSAN |
| Model | MICRA NOTE |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Paired article numbers | AST0264 |
Important compatibility info
| Steering arm type | for control arm |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Function | Ball Joint |
| Diameter | 17 mm |
| Type | Ball Joint |
| Bore Diameter 1 | 8.2 mm |
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Diameter | 17 mm |
| Type | Ball Joint |
| Paired article numbers | NST0193 |
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Cone Size | 16 mm |
| Thread Size | M14x1.5, M40x1.5 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Paired article numbers | NST0055 |
Important compatibility info
| Diameter | 16 mm |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Number of mounting bores | 2 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | NST0065 |
| Flange Hole Diameter | 12 mm |
Important compatibility info
| Mounting Type | Pressed |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Diameter | 20 mm |
| Type | Ball Joint |
| Paired article numbers | NST0206 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Replaces | 41882 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter 1 | 38.5 mm |
| Version | Fitting Kit |
| Bore Diameter | 18 mm |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Steering arm type | for control arm |
Important compatibility info
| Steering arm type | for control arm |
| Bore Diameter 2 | 21.5 mm |
| Bore Diameter 1 | 18 mm |
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Thread Measurement 1 | M16x1.5 |
| Bore Diameter | 44.5 mm |
| Function | Ball Joint |
| Type | Ball Joint |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Function | Ball Joint |
| Bore Diameter 1 | 18 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 2 | 38.3 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Bore Diameter 2 | 38.3 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 1 | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Mounting Type | Pressed |
| Bore Diameter 1 | 18 mm |
| Bore Diameter 2 | 21.5 mm |
| Version | Fitting Kit |
| Thread Measurement 1 | M16x1.5 |
| Bore Diameter | 44.5 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 18 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 5043906 |
| Placement on Vehicle | Front Axle, outer, Lower |
| Length | 125 mm |
| Thread Size | M10 |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Net weight | 0.58 kg |
Important compatibility info
| Type | Ball Joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Model | 924 944 GOLF JETTA SCIROCCO |
| Diameter | 17 mm |
| Manufacturer | PORSCHE VOLKSWAGEN |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Paired article numbers | AST0193 |
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Cone Size | 15.8 mm |
| Thread Size | M14x1.5 |
| Steering arm type | for control arm |
| Manufacturer | CITROEN PEUGEOT |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Mounting Type | Bolted |
| Paired article numbers | AST0055 |
Important compatibility info
| Cone Size | 16 mm |
| Function | Knuckle Joint |
| Type | Knuckle Joint |
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Thread Size | M14x1.5 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Diameter | 15 mm |
| Paired article numbers | NST0172 |
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Diameter | 20 mm |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Steering arm type | for control arm |
| Type | Ball Joint |
| Function | Ball Joint |
| Manufacturer | MITSUBISHI PEUGEOT |
| Mounting Type | Pressed |
| Model | 4007 ASX LANCER OUTLANDER |
| Paired article numbers | AST0206 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Function | Ball Joint |
| Type | Ball Joint |
| Bore Diameter 1 | 8.2 mm |
| Diameter | 17 mm |
| Steering arm type | for control arm |
Important compatibility info
| Steering arm type | for control arm |
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Thread Measurement 1 | M34x1.5 |
| Thread Size | M12x1.25 |
| Bore Diameter 1 | 14 mm |
| Function | Ball Joint |
| Bore Diameter 2 | 16 mm |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Upper |
Important compatibility info
| Cone Size 1 | 18 mm |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 13 mm |
| Type | Ball Joint |
| Hub fastening hole diameter | 41.5 mm |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Version | Fitting Kit |
| Bore Diameter 2 | 34.9 mm |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 1 | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Diameter | 15 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Manufacturer | FORD VOLVO |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Thread Size | M14x1.5 |
| Paired article numbers | AST0172 |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Bore Diameter 1 | 16 mm |
| Function | Ball Joint |
| Bore Diameter 2 | 34.9 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Cone Size | 18 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Net weight | 0.29 kg |
Important compatibility info
| Number of mounting bores | 3 |
| Steering arm type | for control arm |
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Bore Diameter 1 | 10.5 mm |
| Number of Rivet Holes | 3 |
| Function | Ball Joint |
| Type | Ball Joint |
| Diameter | 16 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































