Important compatibility info
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| for brake disc thickness | 22 mm |
| Function | Brake Caliper |
| Piston Diameter | 42 mm |
| Replaces | BC21523 |
| for brake disc diameter | 310 mm |
| Type | Brake Caliper |
Important compatibility info
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| for brake disc thickness | 22 mm |
| Function | Brake Caliper |
| Piston Diameter | 42 mm |
| Replaces | BC21523 |
| for brake disc diameter | 310 mm |
| Type | Brake Caliper |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2.2 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
| Weight | 3.91 kg |
| Length | 31.5 cm |
| Height | 14.5 cm |
| Width | 18.01 cm |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2.2 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
| Weight | 3.91 kg |
| Length | 31.5 cm |
| Height | 14.5 cm |
| Width | 18.01 cm |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Important compatibility info
| Replaces | 566002 |
| Width | 100 mm |
| Spring Design | Leaf spring, Parabolic Spring |
| Length 1/ Length 2 | 650/650 mm |
| Number of spring leaves | 2 |
| Type | Spring Pack |
| Placement on Vehicle | Front Axle |
| Function | Spring Pack |
Important compatibility info
| Replaces | 566002 |
| Width | 100 mm |
| Spring Design | Leaf spring, Parabolic Spring |
| Length 1/ Length 2 | 650/650 mm |
| Number of spring leaves | 2 |
| Type | Spring Pack |
| Placement on Vehicle | Front Axle |
| Function | Spring Pack |
Important compatibility info
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rear Muffler |
| Type | Rear Muffler |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rear Muffler |
| Type | Rear Muffler |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Connector Shape | Rectangular |
| Function | Alternator |
| Number of mounting bores | 4 |
| Type | Alternator |
| Connector / Clamp | B+/D+/W |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Connector Shape | Rectangular |
| Function | Alternator |
| Number of mounting bores | 4 |
| Type | Alternator |
| Connector / Clamp | B+/D+/W |
Important compatibility info
| Diameter 1 | 22 mm |
| Inlet Diameter | 33 mm |
| Outlet Diameter | 33 mm |
| Diameter 2 | 22 mm |
| for OE number | 2Q0121253K |
| Packaging height | 11.80 cm |
| Packaging length | 87.9 cm |
| Packaging width | 52.90 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Cooling fins material | Aluminium |
| Radiator type | Brazed cooling fins |
| Water tank material (radiator) | Plastic |
| Core Length | 650 mm |
| Core Width | 450 mm |
| Core Depth | 28 mm |
| Net Weight | 3646 g |
| Manufacturer | MAHLE |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Diameter 1 | 22 mm |
| Inlet Diameter | 33 mm |
| Outlet Diameter | 33 mm |
| Diameter 2 | 22 mm |
| for OE number | 2Q0121253K |
| Packaging height | 11.80 cm |
| Packaging length | 87.9 cm |
| Packaging width | 52.90 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Cooling fins material | Aluminium |
| Radiator type | Brazed cooling fins |
| Water tank material (radiator) | Plastic |
| Core Length | 650 mm |
| Core Width | 450 mm |
| Core Depth | 28 mm |
| Net Weight | 3646 g |
| Manufacturer | MAHLE |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 5.59 kg |
| Bore Diameter 1 | 10 mm |
| Function | Alternator |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 54 mm |
| Clamp | M8 B+, COM/LIN2 |
| Type | Alternator |
| Plug Type ID | 0313 |
| Alternator Charge Current | 80 A |
| Voltage | 14 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Net weight | 5.59 kg |
| Bore Diameter 1 | 10 mm |
| Function | Alternator |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 54 mm |
| Clamp | M8 B+, COM/LIN2 |
| Type | Alternator |
| Plug Type ID | 0313 |
| Alternator Charge Current | 80 A |
| Voltage | 14 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Net weight | 0.882 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| for OE number | 95508621 |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | in fuel tank |
| Weight | 1.168 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Net weight | 0.882 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| for OE number | 95508621 |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | in fuel tank |
| Weight | 1.168 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Title | Circuit Tracer for Shorts and Open circuits ECT3000 |
Additional Information
- Signal Locking will show the correct direction to a short to ground
- Signal distance bar indicates distance height from short to ground or open circuits
- LED light on receiver illuminates the work space area
- Longer 10-minute Auto shut off time
- Operating Voltage (Transmitter): 6V-48V DC
- Current Consumption (Transmitter): <200mA
- Operating Voltage (Receiver): 2 AAA batteries
- Signal Frequency: 4kHz polarized signal
- Circuit Testing Modes: Open circuit tracking
- short circuit tracking
- ground circuit tracking
- Operating Temperature: Up to 50°C
- Storage Temperature: Up to 70°C
- Maximum Humidity: 80% non-condensing
- Altitude Limit: <2000m
- Signal Detection: Indicates short and open circuits using visual and audio cues
- Sensitivity Adjustment: Adjustable for varying signal strengths
- Auto Shutoff: Receiver turns off after 10 minutes of inactivity
- Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
- Cable Length: 6m transmitter power cable for extended reach.
Important compatibility info
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Type | Window Regulator |
| Function | Window Regulator |
| Voltage | 12 V |
| Placement on Vehicle | Right Front |
| Combi Switch Function | with comfort function |
Important compatibility info
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Type | Window Regulator |
| Function | Window Regulator |
| Voltage | 12 V |
| Placement on Vehicle | Right Front |
| Combi Switch Function | with comfort function |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer | VOLKSWAGEN |
| Model | CARAVELLE TOUAREG TRANSPORTER |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 18 |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer | VOLKSWAGEN |
| Model | CARAVELLE TOUAREG TRANSPORTER |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 18 |
Important compatibility info
| Function | Fuel Feed Unit |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Replaces | QFP887 |
Important compatibility info
| Function | Fuel Feed Unit |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Replaces | QFP887 |
Important compatibility info
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Outer diameter | 276 mm |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADT332112N)
- 1x Blue Print Clutch Disc (ADT331102)
- 1x Blue Print Clutch Release Bearing (ADT33350)
Important compatibility info
| Multi-piece | Three-piece |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Outer diameter | 276 mm |
| Additional Information | with synthetic grease |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADT332112N)
- 1x Blue Print Clutch Disc (ADT331102)
- 1x Blue Print Clutch Release Bearing (ADT33350)
Important compatibility info
| Plug Type ID | B+,D+,DFM |
| Function | Alternator |
| Connector Shape | Rectangular |
| Belt Pulley Diameter | 55 mm |
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 4 |
Important compatibility info
| Plug Type ID | B+,D+,DFM |
| Function | Alternator |
| Connector Shape | Rectangular |
| Belt Pulley Diameter | 55 mm |
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 4 |
Important compatibility info
| Outer diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 56 ° |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 56 ° |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Inlets / Outlets | 2 |
| Housing Colour | Black |
| Net weight | 0.21 kg |
| Type | Pressure Control Valve, common rail system |
| Function | Pressure Control Valve, common rail system |
Important compatibility info
| Number of Inlets / Outlets | 2 |
| Housing Colour | Black |
| Net weight | 0.21 kg |
| Type | Pressure Control Valve, common rail system |
| Function | Pressure Control Valve, common rail system |
Important compatibility info
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 123 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | AU360L; AU362L |
| Length | 545 mm |
Important compatibility info
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 123 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | AU360L; AU362L |
| Length | 545 mm |
Important compatibility info
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Diameter | 250 mm |
Important compatibility info
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Diameter | 250 mm |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Vacuum Pump, brake system |
| Type | Vacuum Pump, brake system |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Vacuum Pump, brake system |
| Type | Vacuum Pump, brake system |
Important compatibility info
| Plug Type ID | FR,SIG,B+,B+ |
| Connector Shape | Rectangular |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 124 A |
| Belt Pulley Diameter | 53 mm |
| Function | Alternator |
| Type | Alternator |
| Number of mounting bores | 3 |
Important compatibility info
| Plug Type ID | FR,SIG,B+,B+ |
| Connector Shape | Rectangular |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 124 A |
| Belt Pulley Diameter | 53 mm |
| Function | Alternator |
| Type | Alternator |
| Number of mounting bores | 3 |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























