Important compatibility info
| Extra Description | Excel-G |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Extra Description | Excel-G |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Additional Information | with water pump, with gaskets/seals |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
Additional Information
- 1x Gates Timing Belt (T359HOB)
- 1x Gates Timing Belt (T357HOB)
- 1x Gates Tensioner Pulley, timing belt (T43266)
- 1x Gates Water Pump, engine cooling (WP0208)
- 1x Gates Full Gasket Kit, engine (SET180)
- 1x Gates Bolt and Nut Kit (SET185)
Important compatibility info
| Additional Information | with water pump, with gaskets/seals |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
Additional Information
- 1x Gates Timing Belt (T359HOB)
- 1x Gates Timing Belt (T357HOB)
- 1x Gates Tensioner Pulley, timing belt (T43266)
- 1x Gates Water Pump, engine cooling (WP0208)
- 1x Gates Full Gasket Kit, engine (SET180)
- 1x Gates Bolt and Nut Kit (SET185)
Important compatibility info
| Additional Information | with intermediate shaft gear |
| Length | 930 mm |
| External Teeth, Wheel Side | 38 |
| Int. teeth, diff.side, conn.to transm. | 26 |
| Additional Information 2 | with bearing |
| Multi-piece | Two-piece |
| Length 2 | 336 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Additional Information | with intermediate shaft gear |
| Length | 930 mm |
| External Teeth, Wheel Side | 38 |
| Int. teeth, diff.side, conn.to transm. | 26 |
| Additional Information 2 | with bearing |
| Multi-piece | Two-piece |
| Length 2 | 336 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Hitachi |
| Alternator Charge Current | 110 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Replaces | 13712N |
| Type | Alternator |
| Weight | 6.24 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Hitachi |
| Alternator Charge Current | 110 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Replaces | 13712N |
| Type | Alternator |
| Weight | 6.24 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 137 mm |
| Pressure | 110 bar |
| Number of grooves | 6 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 137 mm |
| Pressure | 110 bar |
| Number of grooves | 6 |
Important compatibility info
| Number of Teeth | 14 |
| Hub Profile | 18.8 x 15.8 |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 205 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 14 |
| Hub Profile | 18.8 x 15.8 |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 205 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Pulleys | without belt pulley |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Pulleys | without belt pulley |
Important compatibility info
| Placement on Vehicle | both sides |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Length | 569 mm |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Length | 569 mm |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outlet Diameter | 14.3 mm |
| Inlet Diameter | 20.6 mm |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | SANDEN-EQUIVALENT |
| Cylinder Head ID (Compressor) | VED |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 |
| Compressor ID | SD6V12 |
| Belt Pulley Diameter | 108 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Refrigerant | R 134a |
| Voltage | 12 V |
| Oil Fill Quantity | 135 ml |
| Type | Compressor, air conditioning |
| Quality | OE-EQUIVALENT |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Outlet Diameter | 14.3 mm |
| Inlet Diameter | 20.6 mm |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | SANDEN-EQUIVALENT |
| Cylinder Head ID (Compressor) | VED |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 |
| Compressor ID | SD6V12 |
| Belt Pulley Diameter | 108 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Refrigerant | R 134a |
| Voltage | 12 V |
| Oil Fill Quantity | 135 ml |
| Type | Compressor, air conditioning |
| Quality | OE-EQUIVALENT |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Type | Drive Shaft |
| Length | 1002 mm |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Type | Drive Shaft |
| Length | 1002 mm |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| To be used with part number(s) | FK91925 |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91925 |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | YOUNG SHIN |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | with bore for sensor |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 106 mm |
| Pressure | 90 bar |
| Number of grooves | 1 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | YOUNG SHIN |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | with bore for sensor |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 106 mm |
| Pressure | 90 bar |
| Number of grooves | 1 |
Important compatibility info
| Paired article numbers | OP4144904 |
| Placement on Vehicle | Right |
| Bulb Type | H7/H1 |
| Extra Description | TYC |
| Function | Headlight |
| Type | Headlight |
Important compatibility info
| Paired article numbers | OP4144904 |
| Placement on Vehicle | Right |
| Bulb Type | H7/H1 |
| Extra Description | TYC |
| Function | Headlight |
| Type | Headlight |
Important compatibility info
| Radiator type | Brazed cooling fins |
| Water tank material (radiator) | Plastic |
| Packaging length | 73.0 cm |
| Packaging width | 60.50 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Core Depth | 26 mm |
| Net Weight | 3477 g |
| Packaging height | 16.00 cm |
| Extra Description | BEHR |
| Core Width | 468 mm |
| Core Length | 487 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Radiator type | Brazed cooling fins |
| Water tank material (radiator) | Plastic |
| Packaging length | 73.0 cm |
| Packaging width | 60.50 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Core Depth | 26 mm |
| Net Weight | 3477 g |
| Packaging height | 16.00 cm |
| Extra Description | BEHR |
| Core Width | 468 mm |
| Core Length | 487 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (T313)
- 1x Gates Timing Belt (5570XS)
- 1x Gates Tensioner Pulley, timing belt (T41087)
- 1x Gates Tensioner Pulley, timing belt (T41038)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42017)
- 1x Gates Vibration Damper, timing belt (T43178)
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (T313)
- 1x Gates Timing Belt (5570XS)
- 1x Gates Tensioner Pulley, timing belt (T41087)
- 1x Gates Tensioner Pulley, timing belt (T41038)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42017)
- 1x Gates Vibration Damper, timing belt (T43178)
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Additional Information | without gasket/seal |
| Extra Description | Lucas Premium Blade |
| Number of Inlets / Outlets | 2 |
| Weight | 0.813 kg |
| Housing Colour | Black |
| Net weight | 0.770 kg |
| Number of Poles | 2 -pin connector |
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Additional Information | without gasket/seal |
| Extra Description | Lucas Premium Blade |
| Number of Inlets / Outlets | 2 |
| Weight | 0.813 kg |
| Housing Colour | Black |
| Net weight | 0.770 kg |
| Number of Poles | 2 -pin connector |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19 mm |
| Inner Brake Drum Diameter | 229 mm |
| Width | 42 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19 mm |
| Inner Brake Drum Diameter | 229 mm |
| Width | 42 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 60 A |
| Pulleys | with V-ribbed belt pulley |
| Number of Ribs | 1 |
| Voltage | 12 V |
| Type | Alternator |
| Manufacturer Restriction | Hitachi |
| Weight | 6.3 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 60 A |
| Pulleys | with V-ribbed belt pulley |
| Number of Ribs | 1 |
| Voltage | 12 V |
| Type | Alternator |
| Manufacturer Restriction | Hitachi |
| Weight | 6.3 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Important compatibility info
| Function | Throttle Body |
| Type | Throttle Body |
Important compatibility info
| Function | Throttle Body |
| Type | Throttle Body |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Rated Power | 0.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 30 ° |
| Jaw opening angle measurement [Degree] | 32 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 16 mm |
| Connecting Angle | 30 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 70 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8 |
| Length | 180 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 0.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 30 ° |
| Jaw opening angle measurement [Degree] | 32 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 16 mm |
| Connecting Angle | 30 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 70 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8 |
| Length | 180 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Bore Diameter 2 | 12 mm |
| Type | Starter |
| Jaw opening angle measurement [Degree] | 143 ° |
| Thread size 3 | M10x1.5 |
| Pinion Rest Position | -0.5 mm |
| Connecting Angle | 56 ° |
| Clamp | 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 3 |
| Starter Type | Self-supporting |
| Fastening hole angle measurement [Degree] | 56 ° |
| Flange Diameter | 66 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M10x1.5 |
| Number of Teeth | 9. 11 |
| Function | Starter |
| Thread Size | M10 |
| Length | 209 mm |
| Voltage | 12 V |
| Number of mounting bores | 1 |
| Rated Power | 1.1 kW |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























