Important compatibility info
| Additional Information | without central slave cylinder |
| Number of Teeth | 26 |
| Hub Profile | 28,6 x 26,4 |
| Function | Clutch Kit |
| Extra Description | KIT2P |
| for flywheel depth | 8 mm |
| Weight | 6.97 kg |
| External diameter, clutch pressure plate | 240 mm |
| Type | Clutch Kit |
| Replaces | 826361 |
| Additional Information 2 | Special tools for mounting not necessary |
| Clutch | for vehicles with push type clutch |
Additional Information
General Information
Valeo Clutch Kit with hydraulic bearing also available
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5604XS)
- 1x Gates Tensioner Pulley, timing belt (T43237)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42019)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42148)
- 1x Gates Bolt and Nut Kit (SET59)
- 1x Gates Water Pump, engine cooling (WP0031)
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5604XS)
- 1x Gates Tensioner Pulley, timing belt (T43237)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42019)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42148)
- 1x Gates Bolt and Nut Kit (SET59)
- 1x Gates Water Pump, engine cooling (WP0031)
Important compatibility info
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-432300-10 |
| Cylinder Bore | 81 mm |
| Bolt Diameter | 26 mm |
| Compression Height | 45.8 mm |
| Bolt length | 66 mm |
| Recess Depth 1 | 13.1 mm |
| Recess Diameter | 50.88 mm |
| Machined | with cut-out for oil jet |
| Production Number | 07901G220 |
| Specification | Gen 2 engine only |
| for OE number | OE 03L 107 065S |
| Height | 68.8 mm |
| Function | Piston |
| Type | Piston |
| Piston Clearance | 0.06 mm |
Important compatibility info
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-432300-10 |
| Cylinder Bore | 81 mm |
| Bolt Diameter | 26 mm |
| Compression Height | 45.8 mm |
| Bolt length | 66 mm |
| Recess Depth 1 | 13.1 mm |
| Recess Diameter | 50.88 mm |
| Machined | with cut-out for oil jet |
| Production Number | 07901G220 |
| Specification | Gen 2 engine only |
| for OE number | OE 03L 107 065S |
| Height | 68.8 mm |
| Function | Piston |
| Type | Piston |
| Piston Clearance | 0.06 mm |
Important compatibility info
| Type | Piston |
| Function | Piston |
| Production Number | 07901G220 |
| Machined | with cut-out for oil jet |
| Compression Height | 45.8 mm |
| Bolt Diameter | 26 mm |
| Component Number | 08-432307-10 |
| Height | 68.8 mm |
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Recess Diameter | 50.88 mm |
| Recess Depth 1 | 13.1 mm |
| Bolt length | 66 mm |
| Oversize | 0.5 mm |
| Cylinder Bore | 81.5 mm |
| for OE number | OE 03L 107 065 |
| Specification | Gen 2 engine only |
Important compatibility info
| Type | Piston |
| Function | Piston |
| Production Number | 07901G220 |
| Machined | with cut-out for oil jet |
| Compression Height | 45.8 mm |
| Bolt Diameter | 26 mm |
| Component Number | 08-432307-10 |
| Height | 68.8 mm |
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Recess Diameter | 50.88 mm |
| Recess Depth 1 | 13.1 mm |
| Bolt length | 66 mm |
| Oversize | 0.5 mm |
| Cylinder Bore | 81.5 mm |
| for OE number | OE 03L 107 065 |
| Specification | Gen 2 engine only |
Important compatibility info
| To be used with part number(s) | FK70319 |
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| Placement on Vehicle | Front |
Important compatibility info
| To be used with part number(s) | FK70319 |
| Function | Exhaust Pipe |
| Guarantee | 2 years guarantee |
| Type | Exhaust Pipe |
| Placement on Vehicle | Front |
Important compatibility info
| Type | Catalytic Converter |
| To be used with part number(s) | FK92158 |
| Placement on Vehicle | Rear |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Type | Catalytic Converter |
| To be used with part number(s) | FK92158 |
| Placement on Vehicle | Rear |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Length | 610 mm |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 610 mm |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Extra Description | Fuel Parts |
Important compatibility info
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Extra Description | Fuel Parts |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 680 mm |
| Core Width | 362 mm |
| Core Depth | 26 mm |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 680 mm |
| Core Width | 362 mm |
| Core Depth | 26 mm |
Important compatibility info
| Transmission-side joint diameter | 123 mm |
| External Teeth, Wheel Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Replaces | AU436LR |
| Length | 465 mm |
Important compatibility info
| Transmission-side joint diameter | 123 mm |
| External Teeth, Wheel Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Replaces | AU436LR |
| Length | 465 mm |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | fuel supply unit |
| Function | fuel supply unit |
| Replaces | 0580203142 |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | fuel supply unit |
| Function | fuel supply unit |
| Replaces | 0580203142 |
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 228 mm |
| Number of Teeth | 21 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 228 mm |
| Number of Teeth | 21 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Manufacturer Restriction | TOKICO |
| Piston Diameter | 51 mm |
| Brake Caliper Type | Fist-type Caliper |
| Paired article numbers | BHS1431E |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Material | Cast Iron |
| Manufacturer Restriction | TOKICO |
| Piston Diameter | 51 mm |
| Brake Caliper Type | Fist-type Caliper |
| Paired article numbers | BHS1431E |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Window Regulator |
| Combi Switch Function | with comfort function |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with electric motor |
| Number of Poles | 6 -pin connector |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
Important compatibility info
| Function | Window Regulator |
| Combi Switch Function | with comfort function |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with electric motor |
| Number of Poles | 6 -pin connector |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36 mm |
| Outer diameter | 330 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
| Brake Disc Type | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36 mm |
| Outer diameter | 330 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
| Brake Disc Type | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47571 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47571 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| for brake disc thickness | 12 mm |
| Brake Disc Type | Solid |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Brake System | TRW |
| Model | A6 |
| Manufacturer | AUDI |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake, Brake Caliper (1 piston) |
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Piston diameter 1 | 41 mm |
Important compatibility info
| Type | Brake Caliper |
| for brake disc thickness | 12 mm |
| Brake Disc Type | Solid |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Brake System | TRW |
| Model | A6 |
| Manufacturer | AUDI |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake, Brake Caliper (1 piston) |
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Piston diameter 1 | 41 mm |
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Includes fitting kit | FK91576B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91576 |
| Placement on Vehicle | Rear |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91576B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91576 |
| Placement on Vehicle | Rear |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake System | MANDO |
| Brake Caliper Type | Fist-type Caliper (2 pistons) |
| Piston Diameter | 43 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake System | MANDO |
| Brake Caliper Type | Fist-type Caliper (2 pistons) |
| Piston Diameter | 43 mm |
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB705)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1081)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1082)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB705)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1081)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1082)
Important compatibility info
| Adjustment | with automatic adjustment |
| Diameter | 260 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Adjustment | with automatic adjustment |
| Diameter | 260 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Placement on Vehicle | Right Front |
| To be used with part number(s) | FK91143 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Placement on Vehicle | Right Front |
| To be used with part number(s) | FK91143 |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91208 |
| Includes fitting kit | FK91208B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91208 |
| Includes fitting kit | FK91208B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 4 |
| Material | Ceramic |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























