Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Port / Connector type | Threaded |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Port / Connector type | Threaded |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Paired article numbers | 1LE 247 051-031 |
| Bulb Type | PY21W, H7/H7, W5W |
| Light Function | with high beam, with low beam, with indicator, with position light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 4 |
| Registration Type | ECE approved |
| for PR number | 8BK |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Actuator, headlight levelling (6NM008830-701)
- 1x Hella Bulb (8GH007157-201)
- 1x Hella Bulb (8GH007157-121)
- 1x Hella Bulb (8GP003594-121)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Paired article numbers | 1LE 247 051-031 |
| Bulb Type | PY21W, H7/H7, W5W |
| Light Function | with high beam, with low beam, with indicator, with position light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 4 |
| Registration Type | ECE approved |
| for PR number | 8BK |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Actuator, headlight levelling (6NM008830-701)
- 1x Hella Bulb (8GH007157-201)
- 1x Hella Bulb (8GH007157-121)
- 1x Hella Bulb (8GP003594-121)
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | with V-ribbed belt pulley |
| for OE number | 99610601172 |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | with V-ribbed belt pulley |
| for OE number | 99610601172 |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| Number of Poles | 5 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Number of Poles | 5 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Operating Mode | hydraulic |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Operating Mode | hydraulic |
Important compatibility info
| Additional Information | with gaskets/seals |
| Inlet Diameter | 54 mm |
| Function | Throttle Body |
| Type | Throttle Body |
| Connector Shape | rectangular |
| Mounting Type | Screw Connection |
| Number of Poles | 5 -pin connector |
Important compatibility info
| Additional Information | with gaskets/seals |
| Inlet Diameter | 54 mm |
| Function | Throttle Body |
| Type | Throttle Body |
| Connector Shape | rectangular |
| Mounting Type | Screw Connection |
| Number of Poles | 5 -pin connector |
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of Holes | 5 |
| Brake Disc Thickness | 32 mm |
| Additional Information 2 | with bolts/screws |
| Surface | Coated |
| Rotor Style | perforated/vented |
| Height | 65 mm |
| Outer diameter | 330 mm |
| Tightening Torque | 130 Nm |
| Machining | High-carbon |
| Centering Diameter | 67 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | PRIME LINE - UV Coated |
| Minimum thickness | 30 mm |
| Brake Disc Type | perforated/vented |
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of Holes | 5 |
| Brake Disc Thickness | 32 mm |
| Additional Information 2 | with bolts/screws |
| Surface | Coated |
| Rotor Style | perforated/vented |
| Height | 65 mm |
| Outer diameter | 330 mm |
| Tightening Torque | 130 Nm |
| Machining | High-carbon |
| Centering Diameter | 67 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | PRIME LINE - UV Coated |
| Minimum thickness | 30 mm |
| Brake Disc Type | perforated/vented |
Important compatibility info
| Function | Catalytic Converter |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| Includes fitting kit | FK80428B |
| To be used with part number(s) | FK80428 |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| Includes fitting kit | FK80428B |
| To be used with part number(s) | FK80428 |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Diameter | 210 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510009810)
- 1x LuK Clutch Kit (621310309)
Important compatibility info
| Diameter | 210 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510009810)
- 1x LuK Clutch Kit (621310309)
Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 3 -pin connector |
| Connector Shape | angular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 3 -pin connector |
| Connector Shape | angular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Replaces | HO196L; HO199L |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 630 mm |
| Inner Length | 57 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Replaces | HO196L; HO199L |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 630 mm |
| Inner Length | 57 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Type | Clutch Kit |
| Outer diameter | 251 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 24 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADZ93220N)
- 1x Blue Print Clutch Disc (ADZ93123)
- 1x Blue Print Clutch Release Bearing (ADZ93301)
Important compatibility info
| Type | Clutch Kit |
| Outer diameter | 251 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 24 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADZ93220N)
- 1x Blue Print Clutch Disc (ADZ93123)
- 1x Blue Print Clutch Release Bearing (ADZ93301)
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Weight | 1.834 g |
| Placement on Vehicle | Front, Right |
| Operating Mode | Hydraulic |
| Colour | silver |
| Quality | OE Exact |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Weight | 1.834 g |
| Placement on Vehicle | Front, Right |
| Operating Mode | Hydraulic |
| Colour | silver |
| Quality | OE Exact |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Rated Power | 1.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 0 ° |
| Jaw opening angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 0 ° |
| Clamp | 50, 30 |
| Position / Degree | mittig ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 74 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 234 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 0 ° |
| Jaw opening angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 0 ° |
| Clamp | 50, 30 |
| Position / Degree | mittig ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 74 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 234 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Adapter Shape | triangular |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Adapter Shape | triangular |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
| Adapter Shape | triangular |
| Number of mounting bores at adapter | 3 |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
| Adapter Shape | triangular |
| Number of mounting bores at adapter | 3 |
Important compatibility info
| Number of mounting bores | 7 |
| Type | Flywheel |
| Function | Flywheel |
Important compatibility info
| Number of mounting bores | 7 |
| Type | Flywheel |
| Function | Flywheel |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 120 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 2.75 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 120 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 2.75 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Number of Chain Links | 118. 56. 84 |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Number of Chain Links | 118. 56. 84 |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Outer diameter | 277 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























