Important compatibility info
| for OE number | 51.02301.5213 |
| Additional Information | with starter motor sprocket |
| Number of Teeth | 160 |
| Type | Flywheel |
| Function | Flywheel |
| Pitch circle diameter, hub | 88 mm |
| Number of EDC bores/notches | 58 |
| Hub internal diameter | 50 mm |
| Number of clutch pressure plate fastening holes | 12 |
| Hub external diameter | 115 mm |
| External diameter, clutch pressure plate | 475 mm |
| Hub fastening hole diameter | 17 mm |
| Pitch circle diameter, clutch pressure plate | 450 mm |
| Number of hub fastening holes | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51.02301.5213 |
| Additional Information | with starter motor sprocket |
| Number of Teeth | 160 |
| Type | Flywheel |
| Function | Flywheel |
| Pitch circle diameter, hub | 88 mm |
| Number of EDC bores/notches | 58 |
| Hub internal diameter | 50 mm |
| Number of clutch pressure plate fastening holes | 12 |
| Hub external diameter | 115 mm |
| External diameter, clutch pressure plate | 475 mm |
| Hub fastening hole diameter | 17 mm |
| Pitch circle diameter, clutch pressure plate | 450 mm |
| Number of hub fastening holes | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Title | DynaPad Heat & Noise Reduction - 813mm x 1372 mm - Roll |
Additional Information
- For optimal results install Dynapad over Dynamat Xtreme or Superlite
- Hard-wearing oil and water resistant Urethane top layer ensures durability
- Easy to install underneath or in place of carpet
- Provides 1.11 m2 (12 ft2) of coverage
- Each pack contains a 813mm x 1372 mm (32in. x 54in.) roll
- Perfect for reducing road and engine noise as well as reducing exhaust heat transfer
- Contains 1 sheets
- 813mm x 1372mm
- 32in. x 54in.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Length | 912 mm |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 53 mm |
| External Teeth, Diff.Side | 23 |
| Length 2 | 371 mm |
| Wheel Sided Joint Diameter | 75 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Length | 912 mm |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 53 mm |
| External Teeth, Diff.Side | 23 |
| Length 2 | 371 mm |
| Wheel Sided Joint Diameter | 75 mm |
Important compatibility info
| Length | 1020 mm |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 383 mm |
| Multi-piece | Two-piece |
| Inner Length | 67 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Replaces | FO325R |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 1020 mm |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 383 mm |
| Multi-piece | Two-piece |
| Inner Length | 67 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Replaces | FO325R |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Number of Teeth | 10 |
| Additional Information 2 | with bearing |
| Hub Profile | 29,0 |
| Extra Description | 3-1 Kit |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
| Replaces | QKT2524AF |
Important compatibility info
| Number of Teeth | 10 |
| Additional Information 2 | with bearing |
| Hub Profile | 29,0 |
| Extra Description | 3-1 Kit |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
| Replaces | QKT2524AF |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 14 V |
| Net weight | 6.68 kg |
| Function | Alternator |
| Bore Diameter 1 | 8 mm |
| Type | Alternator |
| Clamp | M8 B+, COM/LIN2C |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 150 A |
| Plug Type ID | 0293 |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 14 V |
| Net weight | 6.68 kg |
| Function | Alternator |
| Bore Diameter 1 | 8 mm |
| Type | Alternator |
| Clamp | M8 B+, COM/LIN2C |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 150 A |
| Plug Type ID | 0293 |
Important compatibility info
| Function | Fuel Feed Unit |
| Delivery Quantity | 110 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Function | Fuel Feed Unit |
| Delivery Quantity | 110 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80528 |
| Type | Catalytic Converter |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80528 |
| Type | Catalytic Converter |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Product met | Euro 3 |
| Extra Description | Approved |
| To be used with part number(s) | FK91199 |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Product met | Euro 3 |
| Extra Description | Approved |
| To be used with part number(s) | FK91199 |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Weight | 1.142 kg |
| Net weight | 1.084 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Cooling Type | Water-cooled |
| Connector Shape | D-Shape |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | without cable |
| Material | Metal |
| Additional Information | without gasket / seal |
| Type | EGR Valve |
Important compatibility info
| Weight | 1.142 kg |
| Net weight | 1.084 kg |
| Extra Description | Fuel Parts |
| Function | EGR Valve |
| Cooling Type | Water-cooled |
| Connector Shape | D-Shape |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | without cable |
| Material | Metal |
| Additional Information | without gasket / seal |
| Type | EGR Valve |
Important compatibility info
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Diameter | 250 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Replaces | 625313833 |
| Adjustment | with automatic adjustment |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510018310)
- 1x LuK Clutch Kit (625306309)
Important compatibility info
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Diameter | 250 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Replaces | 625313833 |
| Adjustment | with automatic adjustment |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510018310)
- 1x LuK Clutch Kit (625306309)
Important compatibility info
| Diameter | 230 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Replaces | 623356833; 623341433 |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510010810)
- 1x LuK Clutch Kit (623380909)
Important compatibility info
| Diameter | 230 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Replaces | 623356833; 623341433 |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510010810)
- 1x LuK Clutch Kit (623380909)
Important compatibility info
| Fastening Type | Double Pivot Lever |
| Number of grooves | 2 |
| Alternator type | excl. vacuum pump |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Belt Pulley Diameter | 88 mm |
| Distance from pulley to alternator | 42 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL49 |
| Alternator Charge Current | 75 A |
| Type | Alternator |
| Clamp | B+(M6),A,S,I |
| Function | Alternator |
| Length | 167 mm |
| Pulleys | with double pulley |
| Voltage | 14 V |
Important compatibility info
| Fastening Type | Double Pivot Lever |
| Number of grooves | 2 |
| Alternator type | excl. vacuum pump |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Belt Pulley Diameter | 88 mm |
| Distance from pulley to alternator | 42 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL49 |
| Alternator Charge Current | 75 A |
| Type | Alternator |
| Clamp | B+(M6),A,S,I |
| Function | Alternator |
| Length | 167 mm |
| Pulleys | with double pulley |
| Voltage | 14 V |
Important compatibility info
| Voltage | 14 V |
| Distance from pulley to alternator | 26.5 mm |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 49.5 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with freewheel belt pulley |
| Length | 186 mm |
| Alternator Charge Current | 120 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Voltage | 14 V |
| Distance from pulley to alternator | 26.5 mm |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 49.5 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with freewheel belt pulley |
| Length | 186 mm |
| Alternator Charge Current | 120 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Function | Oxygen Sensor |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Length | 135 mm |
| Type | Oxygen Sensor |
Important compatibility info
| Function | Oxygen Sensor |
| Lambda Sensor | Switching-type Oxygen Sensor |
| Length | 135 mm |
| Type | Oxygen Sensor |
Important compatibility info
| Placement on Vehicle | Front |
| Inspection Tag | E9-103R |
| Product met | Euro 5 |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80550 |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK80550B |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Front |
| Inspection Tag | E9-103R |
| Product met | Euro 5 |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80550 |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK80550B |
| Material | Ceramic |
Important compatibility info
| Rated Power | 2.2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 125 ° |
| Starter Type | Floating pinion |
| Bore Diameter 3 | 10.6 mm |
| Bore Diameter 2 | 10.6 mm |
| Pinion Rest Position | 21.3 mm |
| Connecting Angle | 125 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 66 mm |
| Number of mounting bores | 3 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.6 mm |
| Number of Teeth | 9 |
| Length | 220 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 2.2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 125 ° |
| Starter Type | Floating pinion |
| Bore Diameter 3 | 10.6 mm |
| Bore Diameter 2 | 10.6 mm |
| Pinion Rest Position | 21.3 mm |
| Connecting Angle | 125 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 66 mm |
| Number of mounting bores | 3 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.6 mm |
| Number of Teeth | 9 |
| Length | 220 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Diameter | 260 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (126006710)
- 1x LuK Clutch Disc (326007810)
- 1x LuK Clutch Release Bearing (500100010)
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Diameter | 260 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (126006710)
- 1x LuK Clutch Disc (326007810)
- 1x LuK Clutch Release Bearing (500100010)
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Function | Repair Kit, control arm |
| Type | Repair Kit, control arm |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x Delphi Link/Coupling Rod, stabiliser bar (TC1473)
- 1x Delphi Link/Coupling Rod, stabiliser bar (TC1474)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1476)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1477)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1749)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1750)
- 1x Delphi Tie Rod End (TA2060)
- 1x Delphi Tie Rod End (TA2061)
Important compatibility info
| Function | Repair Kit, control arm |
| Type | Repair Kit, control arm |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x Delphi Link/Coupling Rod, stabiliser bar (TC1473)
- 1x Delphi Link/Coupling Rod, stabiliser bar (TC1474)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1476)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1477)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1749)
- 1x Delphi Control/Trailing Arm, wheel suspension (TC1750)
- 1x Delphi Tie Rod End (TA2060)
- 1x Delphi Tie Rod End (TA2061)
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without frame |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 570 mm |
| Core Width | 517 mm |
| Core Depth | 42 mm |
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without frame |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 570 mm |
| Core Width | 517 mm |
| Core Depth | 42 mm |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
Important compatibility info
| Material | Stainless Steel |
| Diameter | 73 mm |
| Length | 109 mm |
| Function | Pressure Accumulator, fuel pressure |
| Pressure to | 2.1 bar |
| Type | Pressure Accumulator, fuel pressure |
| Connecting Thread 1 | M12x1,5 |
| Surface | Blank |
Important compatibility info
| Material | Stainless Steel |
| Diameter | 73 mm |
| Length | 109 mm |
| Function | Pressure Accumulator, fuel pressure |
| Pressure to | 2.1 bar |
| Type | Pressure Accumulator, fuel pressure |
| Connecting Thread 1 | M12x1,5 |
| Surface | Blank |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Mounting Type | Bottom eye, Top yoke |
| Function | Air Suspension Strut |
| Type | Air Suspension Strut |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























