Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 180 A |
| Function | Alternator |
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Manufacturer | CHRYSLER |
| Model | 300C |
Important compatibility info
| Width | 60 mm |
| Spring Design | Leaf spring |
| Length 1/ Length 2 | 530/665 mm |
| Placement on Vehicle | Rear Axle |
| Type | Spring Pack |
| Number of spring leaves | 4+2 |
| Part number of recommended accessories | 77818 |
| Function | Spring Pack |
Important compatibility info
| Width | 60 mm |
| Spring Design | Leaf spring |
| Length 1/ Length 2 | 530/665 mm |
| Placement on Vehicle | Rear Axle |
| Type | Spring Pack |
| Number of spring leaves | 4+2 |
| Part number of recommended accessories | 77818 |
| Function | Spring Pack |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 32 mm |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 52.6 mm |
| Rotation Direction | Clockwise rotation |
| Length | 187 mm |
| Function | Alternator |
| Voltage | 14 V |
| Type | Alternator |
| Clamp | B+(M8) |
| Plug Type ID | 61 |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 32 mm |
| Fastening Type | Double Pivot Lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 52.6 mm |
| Rotation Direction | Clockwise rotation |
| Length | 187 mm |
| Function | Alternator |
| Voltage | 14 V |
| Type | Alternator |
| Clamp | B+(M8) |
| Plug Type ID | 61 |
Important compatibility info
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | VS16 |
| Quality | OE-EQUIVALENT |
| Compressor Oil | PAG 46 |
| Oil Fill Quantity | 130 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | VS16 |
| Quality | OE-EQUIVALENT |
| Compressor Oil | PAG 46 |
| Oil Fill Quantity | 130 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Housing Colour | Black |
| Net weight | 1.804 kg |
| Additional Information | with gaskets/seals |
| Number of Inlets / Outlets | 3 |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Important compatibility info
| Housing Colour | Black |
| Net weight | 1.804 kg |
| Additional Information | with gaskets/seals |
| Number of Inlets / Outlets | 3 |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92338B |
| Product met | Euro 6 |
| To be used with part number(s) | FK92338 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92338B |
| Product met | Euro 6 |
| To be used with part number(s) | FK92338 |
| Material | Ceramic |
Important compatibility info
| Title | Xtreme Noise Reduction Sheet - Bulk - 457mm x 812mm - Pack Of 9 |
Additional Information
This Xtreme Bulk Pack from Dynamat contains nine 18 inch x 32 inch pieces of Dynamat Xtreme soundproofing. It can be used in vehicles on rear decks, doors, floors and the boot on a vehicle to stop vibrations and reduce road noise. It can also be great to use when resorting old cars, vans and trucks to provide you with a more solid and quieter feel to your vehicle. Easy use and fit. Will provide you with a professional high quality level of sound deadening.
Dynamat is recognized by consumers around the world as a quality product for solutions to unwanted noise and vibration. The Dynamat brand maintains a dominant market share in Car Audio and Automotive Restoration acoustic solutions. Dynamic also provides a broad range of unique product solutions for home acoustics, computers, appliances, and Original Equipment Manufacturers.
- Self adhesive
- Lowers road noise
- Improves bass and music clarity
- Use on the interior sheet metal of vehicles to stop vibration and reduce road noise
- Dynamat makes cars feel solid - doors and boots slam snug, rain and wind virtually disappear
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with sensor |
| Function | Cooler, exhaust gas recirculation |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with gasket/seal |
| Type | Cooler, exhaust gas recirculation |
| Replaces | 7.02156.21.0 |
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with sensor |
| Function | Cooler, exhaust gas recirculation |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with gasket/seal |
| Type | Cooler, exhaust gas recirculation |
| Replaces | 7.02156.21.0 |
Important compatibility info
| Width | 20 cm |
| Function | Air Suspension Strut |
| Length | 60 cm |
| Placement on Vehicle | Right Front |
| Extra Description | Dunlop Original spare part |
| Type | Air Suspension Strut |
| Weight | 3.5 kg |
| Height | 20 cm |
Important compatibility info
| Width | 20 cm |
| Function | Air Suspension Strut |
| Length | 60 cm |
| Placement on Vehicle | Right Front |
| Extra Description | Dunlop Original spare part |
| Type | Air Suspension Strut |
| Weight | 3.5 kg |
| Height | 20 cm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Pulleys | with V-ribbed belt pulley |
| Alternator Charge Current | 220 A |
| Type | Alternator |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Weight | 8.4 kg |
| Length | 34.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Voltage | 12 V |
| Pulleys | with V-ribbed belt pulley |
| Alternator Charge Current | 220 A |
| Type | Alternator |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Weight | 8.4 kg |
| Length | 34.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Length | 793 mm |
| Inner Length | 75 mm |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | BM257R; BM256R; BM258R; BM259R |
Important compatibility info
| Length | 793 mm |
| Inner Length | 75 mm |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | BM257R; BM256R; BM258R; BM259R |
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| To be used with part number(s) | FK92642 |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| To be used with part number(s) | FK92642 |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| Outer diameter | 239 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Hub Profile | 35.3 x 32.6 |
| Type | Clutch Kit |
| Number of Teeth | 26 |
| Number of Parts | 3 -part |
Important compatibility info
| Outer diameter | 239 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Hub Profile | 35.3 x 32.6 |
| Type | Clutch Kit |
| Number of Teeth | 26 |
| Number of Parts | 3 -part |
Important compatibility info
| Additional Information 2 | with bolts/screws, with flywheel |
| Extra Description | SMARTFIT Conversion Kit |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Multi-piece | Four-piece |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease |
| Number of Teeth | 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Kit (ADV183065)
- 1x Blue Print Central Slave Cylinder, clutch (ADV183602)
Important compatibility info
| Additional Information 2 | with bolts/screws, with flywheel |
| Extra Description | SMARTFIT Conversion Kit |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Multi-piece | Four-piece |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease |
| Number of Teeth | 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Kit (ADV183065)
- 1x Blue Print Central Slave Cylinder, clutch (ADV183602)
Important compatibility info
| Outer diameter | 362 mm |
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 362 mm |
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 235 mm |
| Type | Clutch Kit |
| Number of Teeth | 20 |
| Hub Profile | 23,1 |
| Additional Information 2 | with bearing |
| Extra Description | 3-1 Kit |
Important compatibility info
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 235 mm |
| Type | Clutch Kit |
| Number of Teeth | 20 |
| Hub Profile | 23,1 |
| Additional Information 2 | with bearing |
| Extra Description | 3-1 Kit |
Important compatibility info
| Number of Teeth | 20 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 22,1 |
| Friction Lining Outer Diameter | 190 mm |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 20 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 22,1 |
| Friction Lining Outer Diameter | 190 mm |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
Important compatibility info
| for OE number | 13 53 7 789 573 |
| Quality | OE Reman |
| Manufacturer Restriction | BOSCH |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Type | Injector |
| Function | Injector |
| Gross Weight | 0.596 kg |
Important compatibility info
| for OE number | 13 53 7 789 573 |
| Quality | OE Reman |
| Manufacturer Restriction | BOSCH |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Type | Injector |
| Function | Injector |
| Gross Weight | 0.596 kg |
Important compatibility info
| for OE number | 4431258 |
| Manufacturer Restriction | BOSCH |
| Injection System | Common Rail |
| Type | Injector |
| Fuel Type | Diesel |
| Quality | OE Supply |
| Version | With injector sleeve |
| Gross Weight | 0.383 kg |
| Function | Injector |
Important compatibility info
| for OE number | 4431258 |
| Manufacturer Restriction | BOSCH |
| Injection System | Common Rail |
| Type | Injector |
| Fuel Type | Diesel |
| Quality | OE Supply |
| Version | With injector sleeve |
| Gross Weight | 0.383 kg |
| Function | Injector |
Important compatibility info
| Alternator Charge Current | 220 A |
| Belt Pulley Diameter | 54 mm |
| Voltage | 14 V |
| Vehicle Main Current | for vehicles with 12V main current |
| Type | Alternator |
| Gross Weight | 7620 g |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with multi-belt pulley |
| Quality | OE |
Important compatibility info
| Alternator Charge Current | 220 A |
| Belt Pulley Diameter | 54 mm |
| Voltage | 14 V |
| Vehicle Main Current | for vehicles with 12V main current |
| Type | Alternator |
| Gross Weight | 7620 g |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with multi-belt pulley |
| Quality | OE |
Important compatibility info
| Guarantee | 3 years guarantee |
| To be used with part number(s) | FK11038 |
| Product met | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Labels & Certifications | Euro 4 |
| Includes fitting kit | FK11038B |
| Material | Silicon carbide |
| Function | Soot/Particulate Filter, exhaust system |
Important compatibility info
| Guarantee | 3 years guarantee |
| To be used with part number(s) | FK11038 |
| Product met | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Labels & Certifications | Euro 4 |
| Includes fitting kit | FK11038B |
| Material | Silicon carbide |
| Function | Soot/Particulate Filter, exhaust system |
Important compatibility info
| Voltage | 14 V |
| Distance from pulley to alternator | 95.5 mm |
| Fastening Type | Single pivoted lever |
| Number of grooves | 7 |
| Alternator type | excl. vacuum pump |
| Belt Pulley Diameter | 58 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with freewheel belt pulley |
| Length | 173 mm |
| Function | Alternator |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator Charge Current | 80 A |
| Type | Alternator |
| Plug Type ID | 92 |
| Clamp | B+(M6) |
Important compatibility info
| Voltage | 14 V |
| Distance from pulley to alternator | 95.5 mm |
| Fastening Type | Single pivoted lever |
| Number of grooves | 7 |
| Alternator type | excl. vacuum pump |
| Belt Pulley Diameter | 58 mm |
| Rotation Direction | Clockwise rotation |
| Pulleys | with freewheel belt pulley |
| Length | 173 mm |
| Function | Alternator |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator Charge Current | 80 A |
| Type | Alternator |
| Plug Type ID | 92 |
| Clamp | B+(M6) |
Important compatibility info
| Function | Injector Nozzle |
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Type | Injector Nozzle |
Important compatibility info
| Function | Injector Nozzle |
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Type | Injector Nozzle |
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510016210)
- 1x LuK Clutch Kit (624372009)
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510016210)
- 1x LuK Clutch Kit (624372009)
Important compatibility info
| Product met | Euro 3 |
| To be used with part number(s) | FK91126 |
| Includes fitting kit | FK91126B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Product met | Euro 3 |
| To be used with part number(s) | FK91126 |
| Includes fitting kit | FK91126B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Material | Ceramic |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























